r/Glock19 • • Mar 30 '26

When precision meets pressure! Here’s my daily carry what’s yours?

Post image
0 Upvotes

r/Glock19 • • Jun 22 '24

Help

Post image
0 Upvotes

My friend gave me this glock19x like this in all pieces how do I put back together and what I store I get extended clip orange county califronia


r/Glock19 • • Jun 27 '25

Weird Metal Thing Sticking Out

Post image
0 Upvotes

So I did recently purchase this G19 from a flea market a couple days ago, and it worked fine (as in, I shot the dirt once in my backyard.) I usually keep it in the empty position when I keep it in its case, but today I saw this that I haven’t seen before during this couple days of owning it. I’m just wondering if it’s something that’s broke in my gun now without me firing it or damaging it more. I am new to guns and this is my first one so my apologies if I sound stupid.


r/Glock19 • • Apr 26 '25

Life’s a gamble. G19 G26 And their buddies

Post image
8 Upvotes

r/Glock19 • • May 15 '24

Gen5 current iteration

Thumbnail
gallery
0 Upvotes

My gen 5 build! Dead Ringer Snake eyes sights, Radian Ramjet Afterburner, NDZ guide rod with 15# spring, extended take down release, Tyrant ambi slide release, Tyrant magwell,strike industries mag extension, strike industries modular mag release, Suarez international back plate and lightweight striker, brass channel liner, metal striker sleeve and spring cups, ghost 6# striker spring, tin coated safety plunger with reduced power spring, Timney alpha with groove cut on cross bar, Johnnny Glocks extra power trigger spring, RYG trigger housing with over travel screw, Ghost tactical 5.0 connector with over travel tab! With that combination (which took a few tries to get to this one) the trigger has small amount of take up with a solid wall, no creep, breaks like glass at 3lbs with double dose of over travel stoppage for nice even stop with super short tactile reset and is the best Glock trigger I've squeezed


r/Glock19 • • Oct 31 '22

EDC

Post image
0 Upvotes

r/Glock19 • • Jul 22 '26

now shes a 23

Thumbnail gallery
1 Upvotes

r/Glock19 • • Mar 17 '26

Big bro lil bro

Post image
1 Upvotes

r/Glock19 • • May 09 '25

Glock 19 build 🥶

Post image
0 Upvotes

r/Glock19 • • Aug 02 '24

My baby

Thumbnail
gallery
0 Upvotes

r/Glock19 • • Jul 03 '26

Just upgraded the sight!

Thumbnail
gallery
10 Upvotes

Osight k 🔴!


r/Glock19 • • Jul 04 '25

Gen 4 afterburner ramjet on gen 5 Glock 19

Thumbnail
gallery
2 Upvotes

I purchased a second hand gen 4 afterburner ramjet because it was cheap thinking that it would fit my gen 5 apparently I got some bad info online because It does not fit. When trying to install it the pin actually got jammed and I could not get it out even the barrel was stuck. Eventually I removed it but scratched the finish on the comp in the process. At that point I could not see trying to resell it so I made some slight modification to the barrel where the taper pin sits I was able to get it to fit snug and it works great. Put about 500 rounds through it now without issue and love the way the gun shoots and feels. Hopefully no one makes this same mistake but if so it is possible to get it working properly. Also don’t worry about the Olight lol it’s fine.


r/Glock19 • • Nov 02 '21

Always with me

Thumbnail
gallery
0 Upvotes

r/Glock19 • • Aug 21 '25

Glock 19 battlered/ distress red cerakote Gen 3 w zaffari precision barrel

Thumbnail
gallery
0 Upvotes

So I had a few questions

  1. I just bought this Glock 19 gen 3 for 550$ almost brand new, was that a good price?

  2. Will this zaffari precision barrel run good? They were 190$ & it makes my 19s barrel longer then a g17 (barrel info in last two pictures it says Glock gen’s 1-4)

  3. Is 416R stainless steel better then the Glock factory stainless steel barrel considering zaffari barrels are more modern?

  4. It’s more of a range toy but I put a KRISS VECTOR 40 rd mag extension on my Glock 17 magazine, will that run good? I mean I did my research on mostly everything here (I’m not just a dumbass going for it) I just wanna see everyone else’s opinion & double check to make sure(: for some reason I don’t trust the gold barrel because it looks like a toy or something lol but I think I’m just overreacting


r/Glock19 • • Jul 24 '26

Gen5 G19, which magazine extensions fit "level" with the front strap?

Post image
0 Upvotes

Gen5 G19, which magazine extensions fit "level" with the front strap?

I'm a bit of an autistic weirdo that I am (it's Reddit, so that may be redundant 😂). So at some point I found the G19 length guns to bug me with my pinky landing right on the front lip, so I went to full size frames.

BUT, I believe I've seen some magazine extensions (+3 or +5/6) that fit so perfectly as to continue the "flow" of the front strap. An example from another manufacturer would be the extended sexy magazine for the Echelon (pictured). It's been a while since I've handled a Gen 5 G19, so I don't remember if the front lip curves out just a little bit. If it does, and the extension otherwise fits the way I am thinking, I wouldn't have an issue modifying that tip of the frame.

TTI look close, But it's honestly hard to find a G19 photo with TTI extensions that doesn't have a magazine well attached. I've also ruled out a magazine well because that just exasperates the feeling of my hand getting crowded.

I got a Hyve extension on a used G43 once that reminds me of the fit I'm thinking of. It looks like all they offer is a +3 for the G19 and a plus 5 for the G17.

Thanks for your time. This might be a fool's errand, but it's been on my mind for a few days.


r/Glock19 • • Oct 21 '25

https://us.glock.com/en/discontinued-models

0 Upvotes

https://us.glock.com/en/discontinued-models Discontinued Commercial Pistol Models G17 – Gen4 G17 MOS – Gen4 | Gen5 G17L – Classic | Gen3 G17L MOS – Gen5 G19 – Gen4 G19 MOS – Gen4 G20 – Gen3 | Gen4 G21 – Gen3 | Gen4 G21SF G22 – Gen3 | Gen4 | Gen5 G22 MOS – Gen5 G23 – Gen4 G24 G26 – Gen4 G27 – Gen3 | Gen 4 | Gen5 G29 – Gen3 | Gen 4 | Gen5 G29SF G30 – Gen3 | Gen 4 | Gen5 G31 – Gen3 | Gen4 G32 – Gen3 | Gen4
G33 – Gen3 | Gen4 G34 – Gen3 | Gen4 G34 MOS – Gen4 | Gen5 G35 – Gen3 | Gen4 G35 MOS – Gen4
G36 G36 FGR G37 – Gen3 | Gen4 G38 G39 G40 MOS – Gen4 G41 – Gen4 G41 MOS – Gen4 G49


r/Glock19 • • Oct 12 '23

this thing fell off my p80 build I’m wondering what it does/ what it’s called and if I should shoot without it

Post image
2 Upvotes

r/Glock19 • • Sep 24 '25

First lil upgrades just waiting on my TLR-7 X

Thumbnail
gallery
0 Upvotes

r/Glock19 • • Sep 24 '25

First lil upgrades just waiting on my TLR-7 X

Thumbnail
gallery
4 Upvotes

r/Glock19 • • Jan 24 '21

Exact frame dimensions? NSFW

0 Upvotes

3D printing project, and I just wanna make sure my frame dimensions are right b4 I print. Thanks!


r/Glock19 • • May 02 '26

Customized Gen 5

Thumbnail
gallery
6 Upvotes

Decided to pamper my conceal carry, These guns are easy to work on.

What are you guys' opinions?


r/Glock19 • • Oct 21 '24

Just got my vector mag, 3d printed frame coming soon

Post image
0 Upvotes

r/Glock19 • • Mar 19 '24

Is this normal (Glock 19 Gen 5)

Post image
11 Upvotes

r/Glock19 • • Mar 15 '25

How can I fix slide

Post image
6 Upvotes

I was trying to put the slide back on clearly it’s not even and incorrect. Any ideas on getting it off??


r/Glock19 • • Feb 09 '25

Is this part visible on your Glock? I took off my lanyard loop and noticed 🧐🤔

Thumbnail
gallery
2 Upvotes