I was visiting a friend who claimed that basements can be built in any location in the US, regardless of rain volume, soil type, etc but "tradition" will dictate wether they are or not, in any specific location. What do you think about this?
This is just a conceptual failure mechanism for people that may be interested. Correction: photos show the party wall also partly collapsed, exposing the joists next door. Cant edit diagram though.
There are now a few open-source tools that let AI assistants like Claude connect to PLAXIS through its Python scripting API. In principle, an agent could build the model, assign materials, set up the construction stages, run the calculations and pull out the results, with you reviewing along the way.
I'm curious how practising geotechnical engineers feel about this. Is it something you'd actually use, maybe for the tedious parts like parametric runs or extracting results? Or is it a non-starter given how much judgement goes into a PLAXIS model, and the responsibility that comes with signing it off?
Interested to hear honest opinions either way, especially from anyone who has tried it.
Anyone else take the California GE Exam this year? It's actually my second time taking it because I was woefully underprepared for what it was going to ask the first time around; however, I think I nailed it this time by putting myself in the mindset of a Southern California Ground Improvement Contractor and residential consulting engineer. We'll see. The first time I also went in with an old copy of NAVFAC that was falling apart and I didn't tab, whereas this time I went in with a new bind of the new versions and tabbed out the important sections and that helped a lot.
That was probably my biggest complaint is like 1/3rd of the questions are ground improvement and dewatering related and most of the time the answer is "it depends" and I'd want more information. Or just isn't my specialty like some of them are pretty niche -- I've never had to do a stone column or vibro-compaction project but I've done a lot of CDSM and Dynamic Compaction jobs. The other 1/3rd feels were all geosynthetics like a geosynthetic manufacturer wrote the a third of the test. The biggest issue is that really we mostly use geotextiles and things like geofoam/geocells are so special that why would you be familiar with them?
There were also A LOT of expansive and collapsible soil questions, which again, feels tailored to residential construction (particularly Southern California). I was a little annoyed one that needed ASTM Standard to answer because I didn't actually bring a printout of them and I'll read up on an standard if I need to. I'm not usually worrying about how they're carried out because that's what the Geotechnical Lab is for. There were of interpreting lab test data and how different tests result in different changes in properties that I feel are in our wheelhouse though.
All the hydraulics and actual bearing/seismic earth pressure/etc questions I feel I nailed, I just had a lot of issues with the open questions about "what do you put on a report" and general "how do you treat this expansive soil" because It Depends(TM).
I have approximately 8 years of experience in geotechnical engineering, including drilling inspections, field investigations, and geotechnical report writing.
I've always wanted to start my own geotechnical business, and I'm currently exploring a couple of options.
1. Starting a Geotechnical Laboratory: I don't have much hands-on laboratory testing experience, but I'm familiar with ASTM standards and believe I can learn to perform the tests with proper training and practice. What tests would you recommend starting with that require relatively low initial investment and have good demand?
2. Starting a Drilling Business: I'm also considering purchasing a drill rig. However, I don't have experience operating one, so I would need to hire an experienced driller and a helper. I'm wondering how practical this would be for a small startup.
I'd really appreciate advice from anyone who has started or currently operates a geotechnical laboratory, drilling company, or consulting business.
Which option would you recommend starting with? What are some challenges, startup costs, or lessons learned that I should consider?
I am currently working as a technician at one of the Geotech lab. They have offered me a manager position. Should I go for it? What are the pros and cons of being a lab manager. As a technician i have a very flexible job even though the pay is not that great. I don’t if that remains the same if I accept the offer.
Are there geotech soils labs in the United States along the PNW that do this specialized work? Talked to some old timers in the industry and I'm told that most of the labs that can do this are more East now.
Update: Wow! Thanks for all the responses and your help everyone. I didn't know some of these labs did this test. Will reach out to the ones close by me.
Our neighbour is constructing an 11–15 ft retaining wall directly against our older ground-floor property. They excavated right next to our foundation and are now filling soil behind the wall to create a level backyard at their house’s height. They claim the wall has an independent foundation. Could this excavation or the pressure from the filled soil cause foundation damage or structural issues to our property? What precautions can we take to protect it? Photo attached. Would appreciate advice from structural engineers.
I'm a civil engineer and one of the founder of Medra Engineering & Software. We've been developing a geotechnical engineering software called GeoteknikPro Studio, and I'd like to connect with geotechnical engineers from different parts of the world.
The software covers several areas of geotechnical engineering, including:
Pile foundation analysis and design
Retaining walls and shoring systems
Ground improvement
Slope stability
Site-specific seismic response analysis
Geotechnical reports
It also includes automatic CAD drawing generation and technical report generation.
The software currently supports English, Spanish and Turkish. Russian language support is also planned and will be added soon.
Why am I posting this?
One thing I've realized is that geotechnical engineering can be quite different from one country to another. Even when we're dealing with the same engineering problem, the design codes, calculation methods, terminology and common practices may differ.
I'd really like to understand how engineers work in different countries and what they expect from geotechnical software. In the long run, we want to incorporate local design codes, calculation procedures and engineering practices into GeoteknikPro Studio.
Rather than trying to figure all of this out ourselves, I think it would be much more valuable to talk to engineers who actually work with these methods and regulations every day.
What I'm looking for
I'm not trying to get hundreds of people to download the software. Ideally, I'd like to connect with one or two practicing geotechnical engineers from each country, at least initially.
I'm particularly interested in people who actively work on geotechnical projects and have experience with some of the subjects covered by the software.
What's in it for you?
I'd be happy to provide one person from a country 10 years of free access to GeoteknikPro Studio.
No payment, no subscription, no commercial expectations, and absolutely no obligation to provide feedback.
If you decide to try it, I'd simply appreciate your honest thoughts. Whether it's a calculation method that needs improvement, a translation that sounds strange, a missing feature, or something that doesn't fit the way engineers work in your country, I'd genuinely like to hear about it.
I'll also provide the user manuals and supporting documentation, so you can see how the calculations are performed rather than just looking at the results.
I'm not expecting positive reviews or endorsements. Constructive criticism would probably be more useful to us than anything else.
If you're interested, feel free to comment below or send me a private message. I'm also happy to communicate through WhatsApp if that's more convenient. Just send me a message and we can exchange contact details.
Thanks for reading, and I'd be glad to hear from anyone interested!
Best regards,
Medra Engineering & Software GeoteknikPro Studio
**************Update 11.11.2026***************
Well, I have a little update!
First of all, thank you so much to everyone who has reached out and shown interest in GeoteknikPro Studio.
To be honest, we originally planned to keep things relatively small and work with just a limited number of engineers from different countries. But the response has been much bigger than we expected! There have been so many messages and requests that keeping everything limited has become a challenge in itself.
So we've decided to change our approach a little!
Instead of limiting the number of participants, we'd now like to offer a trial version to everyone who is interested in giving GeoteknikPro Studio a try.
Whether you're a practicing engineer, a researcher or a student, you're welcome to join us.
We'd still really appreciate your honest feedback, suggestions and criticism. Our goal hasn't changed: we want to learn from engineers around the world and make the software better for different engineering practices and local standards.
If you've already contacted me, don't worry, I haven't forgotten about you! I'll try to get back to everyone and arrange access.
And if you haven't reached out yet but would like to try it, just leave a comment or send me a private message.
Thanks again, everyone. I honestly didn't expect this little project to bring together so many people from different parts of the world. It's been a really nice surprise!
And for everyone who'd like to take a closer look at GeoteknikPro Studio, I've put together a few useful links below. 😊
A couple of small notes about the sample reports and drawings:
First, these are completely RAW outputs generated directly by the software. We haven't edited, reformatted, added or removed anything. What you see is exactly what GeoteknikPro Studio produces.
I mention this because a few people I've shared these samples with have actually asked me, "Did you edit these reports yourself?" So, no post-processing or manual touch-ups!
Also, please keep in mind that the purpose of these examples is simply to demonstrate the software's outputs. Some numerical values and project details are made up, and we've used fictional names and information throughout the examples. You may come across some unusual or even nonsensical details here and there, so don't take those literally! The important thing is to see the structure, presentation and level of detail of the reports and drawings generated by the software.
One important thing when filling out the registration form: Please make sure you enter your email address correctly. Your username will be created using this email address, and the password creation email will be sent directly to it. So please double-check it before submitting the form!
We also understand that some people may not feel comfortable sharing personal information, and that's completely fine. While the email address is essential for creating your account, you don't need to worry too much about the other details. If you'd rather not share your full name or phone number, that's absolutely okay.
For the address field, we'd really appreciate it if you could at least enter your city and country instead of your full address. This would help us understand which country's design codes and engineering practices you're familiar with, so we can better understand your feedback and technical needs.
And just to be clear, any personal information you provide will be kept private and will not be used or shared for any other purpose.
That's all! Thanks again for all the interest, support and enthusiasm. I really appreciate it, and I'm looking forward to hearing what you think.
Hey all, I was told this sub may be better for my question. Original post:
I am a testing engineer and often do field tests using ASTM C1583 and similar, which require a 50-mm (2-inch) diameter core isolation. Finding a 2-inch inner diameter bit has been frustrating for me, as everywhere lists outer diameter and doesn't list the wall dimension of their bits / barrels so I can't be sure if a 2-1/4 or 2-1/8 inch bit would be closer to a 2 inch inner diameter.
Does anyone have a known brand that measures 2 inches for the inside diameter of either a diamond tip core bit or diamond laden core barrel for use with a roto hammer or similar?
For reference, I am never the one drilling these cores since I am third party; contractors do and then I test the core. I usually bring the bit or barrel because it's such a strange size that the contractors usually don't have one available when I arrive.
Hi everyone, I am working on a borehole log in Bentley gINT using a custom library. I have a split-spoon sample divided into two portions, SS1A and SS1B, because the soil type changes within the sample. In the Soil Sampling table, I entered 1A and 1B as separate rows, with the SPT N-value recorded only once. The issue: gINT treats 1A and 1B as separate sample intervals and draws a horizontal line between them. What I want: Display 1A and 1B separately in the Sample Number column. Show one continuous sample box without a horizontal divider between them. Display the SPT N-value only once, centred across the combined interval. Keep the normal sample boundaries for all other split-spoon samples. I have tried modifying the Boundary Line, Range Lines and Border settings under Text vs Depth Properties, but have not been able to achieve this. Is there a built-in function or expression in gINT to group two sampling records into one continuous sample box? Or does this require modifying the report template? Any guidance or example expressions would be appreciated.
Anyone having issues with pumps lately? Seems like they aren't lasting as long as they used to. We have replaced staters about 3 times in the last year.
Anything you've noticed or ways to improve the life of them appreciated.
We did pick up a desander cone and are setting it up to run with a trash pump from our mud tub back to the Moyno. Anyone run a similar setup?
Looking for Opinions and Advice on Terracon – Driller Exploration Team Member II (Chattanooga, TN)
I'm 28, turning 29 soon, and I'm looking into a potential career opportunity with Terracon for their Driller Exploration Team Member II position in Chattanooga, TN. I've never worked in the drilling industry before, and honestly, I don't know a whole lot about it yet. However, I've started doing my own research, reading up on the industry, and I'm genuinely interested in learning more and potentially getting into this line of work.
I spoke with a woman at the Chattanooga office and was able to get some additional information about the position. From what I understand, I'd initially start out as a helper and receive on-the-job training to learn the drilling side of things. They also mentioned that they assist employees with obtaining their CDL. The schedule seems to vary depending on the workload. Sometimes it's around 10 days working followed by 4 days off, while other times it may be closer to a 5-day workweek with weekends off. There's also a fair amount of travel, possibly around 15–25% out-of-town work, with quite a bit of work in the Nashville metro area. I was told that lodging and three meals a day are covered when traveling, and that the workload tends to pick up during the summer months. The schedule was also described as somewhat flexible.
One thing I haven't been able to get a clear answer on yet is the starting pay or salary, so I'd definitely appreciate hearing what someone with experience in this industry typically makes starting out.
I'd really like to hear from anyone currently working in geotechnical drilling, anyone familiar with Terracon as a company, or especially anyone who has worked out of the Chattanooga office. What is the job actually like day to day? How physically demanding is it? What are the biggest challenges for someone just starting out? Is it a good industry to get into long-term, and are there opportunities to move up and make decent money as you gain experience?
I'm not afraid of hard work, being outside, or learning something completely new. I'm just trying to get a better understanding of what I'm potentially getting myself into before making a career move.
Any honest experiences, advice, opinions, or insight about Terracon and this particular position would be greatly appreciated. Thanks!
I'm a civil engineer currently designing a coastal road embankment using GEO5 for settlement analysis, slope stability, and sheet pile design.
The problem is, I'm learning everything on my own without an experienced geotechnical engineer to guide me. The geotechnical report I received has limited laboratory results (mostly Atterberg limits and sieve analysis), but many required parameters like Eoed, friction angle, cohesion, and consolidation properties are missing for Geo5 inputs.
I've been relying on Google, AI, and empirical correlations to estimate these values. However, I'm honestly not confident in my assumptions, yet I feel pressured to proceed with the analysis.
My question to experienced geotechnical engineers: How do you approach preliminary designs with limited soil data? Are there any practical guides, correlation tables, or references you trust for estimating missing parameters?
I'm not asking anyone to do the design for me. I just want to learn how to make reasonable, defensible assumptions and recognize when additional testing is necessary.
Any advice, references, or mentorship would mean a lot. Thanks in advance!
Curious how everyone handles this nowadays. Are you manually copying data, using scripts/OCR, or using ChatGPT/ Claude? Roughly how long would a batch of 100 logs take you, including checking the output?
For transparency, I’m the founder building a digital tool to digitise PDF boreholes. Since launch 6 months ago, we’ve reached 500 unique users and converted around 9,000 boreholes. Thank you!
We’ve also improved processing speed, a batch of 500 logs now takes less than an hour to convert, with checking still a separate step.
We are aware that the landscape has changed rapidly.
I’m interested to see how such tool fits into actual project workflows. Does your company have security protocols? Where does most of your time go: extracting the data, sorting out inconsistent formats, or checking everything afterwards?
Hey everyone! Lately, Ive been thinking on getting Civil engineering undergrad. I have bsc in Geological engineering degree and currently studying Engineering Geology msc. Is it worth it, or it is waste of money and time?