r/Fusion360 • • 7h ago

Editing Parametric Model

Post image
3 Upvotes

Wondering if anyone can edit this parametric rugged box from printables. I have seen this other box that is the same style with one latch. Is anyone able to edit this file so it is one latch? I have tried but it is beyond my CAD skills.

Image of what I'm hoping to achieve attached along with the printables link

https://www.printables.com/model/258431-rugged-box-parametric/files

Not sure if this is a file already somewhere, cannot find it though


r/Fusion360 • • 10h ago

Circular Dependency Error

Post image
4 Upvotes

Hi there, I am designing a CNC router for the company I work for, and I'm having a problem that I just cant figure out. Please see the attached Error Message.

I've looked through the timeline and can't find the what's causing the error. I thought maybe it could be because I used an as-built joint or a rigid group before copying the ballscrew component. The other possible explanation is that I created a Y axis component, and then used paste new to create a new Y axis component that had a dependent copy of ball screw(1) inside it.

I'm not sure what info to give that will help you guys understand the issue. But maybe I could upload the Fusion file?

Thanks, I would appreciate the help, this is a new account as I'm using it at work.


r/Fusion360 • • 8h ago

How do i figure out what’s causing this toolpath to not be generated?

Thumbnail
gallery
1 Upvotes

This groove has 1.15mm and i thought i could mill it with a 1mm bit, but i get this cryptic unhelpful warning (cause why would they tell me exactly what the problem is? It’s not like they generated it based on something they already know it’s wrong). There’s no ‘stock to leave’ checked.
Where the hole intersects it’s only 0.9mm, so i suspect that is the problem. For me this is actually a test to see how the toolpaths behave when they encounter holes instead obstacles, i was expecting to go over, but i have no idea what it does.
In the last image i changed the bit to 0.5mm and it indeed goes over the hole, but the toolpaths look incomplete in that part and don’t understand why.


r/Fusion360 • • 13h ago

Question Having trouble with aligning two parts in assembly mode.

2 Upvotes

Here is a video of what i am trying to do. For some reason it doesn't let me align them, even though both faces have the same angle.


r/Fusion360 • • 19h ago

Any upcoming deal?

6 Upvotes

Black friday is close, and i was wondering if there wil be a deal on fusion. I heard there was 50% off discount last time, and wondering if 50% discount will happen on black friday...

Any insights?


r/Fusion360 • • 1d ago

Workflow for a 3D-printed RC aircraft

Post image
18 Upvotes

Hi all,

A few months ago, I started an RC aircraft project. This was my first big project in Autodesk Fusion, so I modeled the entire aircraft inside a single component (with multiple bodies) and only divided it into separate components at the very end. However, I've noticed this might not be the best approach, as the timeline becomes very long. The worst issue I've faced is when I change a sketch or an operation early in the timeline—Fusion is very prone to losing body and face IDs, so lots of downstream operations get yellow or red warnings.

I know best practice is to create components first and then build the operations inside them, but since this is meant to be 3D printed, I modeled the whole airframe first and then split it to fit my printer's build volume.

How would you model a project like this, and more precisely, what would your approach with components be?

Thanks in advance!!


r/Fusion360 • • 18h ago

Question How can I combine these?

0 Upvotes

I'm trying to join the toes onto the rest of the foot, 5 of them worked but the rest won't. I made the legs in blender, brought them into fusion as an OBJ and split by hull. I then converted the meshes to bodies and I need the toes to be attached so they don't become loose when I eventualy bring the foot into a 3D printing software. I am aware Fusion isn't designed for this stuff but I need to so I can integrate anchoring points to attach the legs to a mechanism I'm making in fusion. Anyone know how I can join these? I have tried repairing the meshes before making them bodies but that didn't work.

Edit: forgot to add video, it's in the comments


r/Fusion360 • • 1d ago

Best way to go about this?

Thumbnail
gallery
3 Upvotes

I’m creating the outline of the handlebars and stem of my scooter so this object fits around it. This is the only way I could figure out how to start measuring everything. I just had to work with what measurements I could go off of and then go from there so now I’m trying to figure out how to make the actual shape with rounded cylinders and extrude it into the object I’m creating. I’m also wondering when I extrude these shapes into the object I don’t wanna actually cut through into the interior. I would like it to also extrude into the inside edge so that it’s a sealed container inside. I will also be joining this container in the middle of the two stems with a front piece so I will have a hole in the center of where the stems are, but I don’t want to have a hole where the stems are in to the container.


r/Fusion360 • • 21h ago

Advice for a pico projector mount

Thumbnail gallery
1 Upvotes

Hi everyone, I'm trying to design a rigid, 3D-printed mount to attach my mini projector (Yingda F100) to a photography light stand for a small installation, and I’d love some mechanical design advice before I start modeling.

Specs & Constraints:

  • Projector weight: 485g

  • Base dimensions: Flat circular base disc, 100mm (10 cm) in diameter (thickness is ~5mm), connected to the projector body by a side yoke arm.

  • Stand connection: Standard 16mm light stand spigot with a 1/4"-20 male thread on top (see attached photo).

  • Fixed position: The projector will always point straight down in the exact orientation shown in the photo at around 10cm from the stand. I do not need any tilt or swivel adjustments.

Where I'm at so far:

  • Stand side (solved): A vertical cylindrical cap/sleeve that fits snugly over the metal spigot to take the lateral load (maybe secured from the top with a washer and a hex nut) extending out into a rigid horizontal arm.

  • Projector side (need help): I need a solid, reliable way to hold that flat 100mm circular disc vertically without wobble or risk of it slipping out. I initially thought about a simple C-shaped drop-in slot, but I'm not confident it will hold securely enough.

What I'm looking for:

What is the best 3D-printable bracket/clamping design to securely hold a flat 100mm circular disc vertically?

I have attached a quick sketch I made in Fusion 360 but it can't be printed as a single piece.

Thanks in advance!


r/Fusion360 • • 1d ago

Question How do I convert a .stl mesh body to a proper body?

Thumbnail reddit.com
2 Upvotes

r/Fusion360 • • 1d ago

How do i do this for the edge like this?

3 Upvotes

its like combining different chamfer size on different side with fillet (?) and how?


r/Fusion360 • • 1d ago

Question Is fusion down?

10 Upvotes

I checked the dashboard but nothing is up, however I can’t connect to servers and there’s a bunch of outage reports.


r/Fusion360 • • 1d ago

how do I make infusion this type of hinges?

2 Upvotes

I was wondering how to build this type of print in place flexible hinges; I tried vaious designs, but I wasn't satisfied whit all of them; does anyone have suggestions?


r/Fusion360 • • 1d ago

Problem 3D CONTUR

0 Upvotes

I'm trying to machine a part using the 3D Contour toolpath. However, the toolpath doesn't seem to respect the individual machining levels. Even though I have defined a stock model, the tool starts cutting directly into the material instead of following the expected machining levels.

In a real machining operation, this would result in a collision with the remaining stock.

What am I doing wrong? Is there a setting I need to adjust to make the toolpath correctly account for the stock and machining levels?


r/Fusion360 • • 1d ago

Question How to make hollow / erase repaired bit?

Post image
0 Upvotes

I want to put a jacket on a model so I fixed it up in MeshMixer but idk how to erase the “repaired” bit to make it hollow (I guess?).

I tried soften-erase via Sculpt but it didn’t do much.

All I know how to do is separate shells, sculpt, and make a hole thru a mesh…


r/Fusion360 • • 1d ago

Help with a container with logo print..

Thumbnail
gallery
3 Upvotes

I've designed a container with a twist lock lid.. but for the life of me, I can't figure out the export requirements..

I created the logos with an svg and extruded into the lid which created 18 new bodies.. i want the bodies to be different objects when i 3d print so I can change the colors but it imports into bambu labs as all separate parts that are separate from the lid..

Also, it adds in this big mass of stuff on top of it when I import.. don't know what that is..


r/Fusion360 • • 2d ago

Question Need help trying to make this

Post image
19 Upvotes

im a complete beginer and am so confused how to get that weird section thats cut off. I can make the wheel by recolving but idk how to get that. Any help would be super appreciated

EDIT: thank you everyone for explaining it to me!


r/Fusion360 • • 2d ago

Question Why is this part of some other part

3 Upvotes

Why is this newly made puck shaped piece (1) part of the arm chair piece (2) that I haven't touched in probably 10 hours?!

The way the puck appeared was me trying to fill in a hole by deleting the inside face of the hole. The plate the hole was in has nothing whatsoever to do with the arm chair piece.

Secondary question: How should I fill in a hole without it fusing its essence with another completely unrelated component?


r/Fusion360 • • 1d ago

Question Help running Fusion 360 after long absence.

1 Upvotes
  • fixed *

I have the personal use version which I use very infrequently.

Probably over a year, I've managed to sign in to my account but when Fusion begins to start it flags an Error "You have been working in offline mode for more than the allowed period of 2 weeks. Application will go online now".

When I click OK (to go online) I get the following Error then it just closes down. "Cannot switch to online mode either. Please check your internet connection. Application will exit now".

Internet is fine as I signed into my account.

Any suggestions where to go from here, am worried I'll lose any previous work if I reinstall from scratch.


r/Fusion360 • • 2d ago

I Created! WIP: a very overcomplicated azimuth-elevation pointing mechanism

13 Upvotes

I’m trying to design and build a celestial body pointer/tracker - similar in function to the ISS tracker pointer made by Practical Engineering. It’s going to be an ornament, and I want the mechanism to be part of the spectacle so it’s way more complicated than it needs to be. Still a lot more to do!


r/Fusion360 • • 2d ago

Question Can't work out rolling ball fillets on 3 axis

2 Upvotes

Not sure how to best describe this so I will start with a photo. I am trying to model a Ubiquiti USW-Flex-2.5G-POE-8 because I can't find a STEP model online.

I measured using radius gauges. It has vertical corner fillets of 14mm and then top and bottom fillets of 25mm with different offsets.

I started with a rectangle, extruded and put the vertical 14mm fillets:

I made the top and bottom radius cuts from the front face:

And then repeated for the end face cuts:

But the result is not a rolling ball (I think thats what I am after)

How do I model this correctly?


r/Fusion360 • • 1d ago

Question Edit in place - extrude won't join for only the shown body. It wants to join the hidden body as well

Post image
1 Upvotes

I often make multiple bodies in one component for 3D printing purposes. I'm getting better at the assembly workflow [and I kind of like it, don't hate me]. But when I E.I.P, I'm running into an issue you can see in the screenshot. Where I want to extrude here, is a hidden body [visibility off] and I want them to be two different bodies.

I'm used to it ignoring the hidden body and only joining the shown body. Umm, am I off here?


r/Fusion360 • • 2d ago

Appearance Issue

Post image
5 Upvotes

Hello, I am having an issue with my part appearing as white colored despite not being configured to a non-white appearance.

I tried clearing my cache, updating my graphics driver, reseting my preferences, and whatever google said to do.

I checked on the phone app to see the same problem there so I realized this is outside my knowledge.

Please help.. 😓😓


r/Fusion360 • • 2d ago

Question Need help making this 3d printed part!

Post image
1 Upvotes

It's a fin on a decorative lamp!

The front view is easy enough to do, but I'm a noob and struggling with the wedge shaped tapering from the side view.