r/FlashForge • u/felsie0 • 1h ago
Beginner here
I found a really good deal for an Adventurer 5M. I’ve heard great things, but I have to know- is this a good option for a beginner with no knowledge?
r/FlashForge • u/felsie0 • 1h ago
I found a really good deal for an Adventurer 5M. I’ve heard great things, but I have to know- is this a good option for a beginner with no knowledge?
r/FlashForge • u/Worldly-Carry9119 • 1h ago
So I was printing the other day and noticed the sound of what seems like the belt I did the belt tension that flashforge shows on the website to realign the belt but am still getting this noise
r/FlashForge • u/PokeJiggy • 1h ago
I have no idea how to go along with this. Sometimes when I use the printer, it works fine, but some others, it makes this weird clicking sound and movement upwards, and sometimes, it would flicker on the screen with 'Z-Axis homing error!' My only temporary solution I came up with was to wait 5 minutes with the printer shut off and it would work 75% of the time, but it has really started to get on my nerves. Any help would be appreciated!
r/FlashForge • u/bristleboar • 3h ago
Bought an OEM FF camera from their eBay store a few weeks ago. I’ve disconnected and reconnected it to my AD5X display board. Did updates, did a factory reset, left power off for an hour.. nada. No camera options under settings.
Am I overlooking something obvious?
r/FlashForge • u/Beaver-on-fire • 4h ago
I wanted a way to monitor my AD5X prints using a USB camera mounted at the front of the print bed, but I couldn't find an existing mount that met my needs. So I designed my own. The mount uses the camera board salvaged from an inexpensive USB webcam purchased on AliExpress.
This was designed specifically for the AD5X, but may fit others using the same frame. I split it into three pieces to accommodate the AD5X build plate.
Printed in PLA with 50% infill and 4 walls. It may also work with an enclosure, although I haven't been able to test that. The frame extends about 1–2 mm beyond the supports. One limitation is that it's primarily intended for monitoring smaller prints.
https://www.printables.com/model/1924873-ad5x-front-facing-print-bed-camera-mount
r/FlashForge • u/maciejc4 • 4h ago
Thinking about grabbing the Creator 5 Pro while it's $749. I'm coming from a Bambu A1 and print a bit of everything: colorful stuff for my kid, CyberBricks parts, functional bits, and soon FPV drone parts (TPU, ASA, maybe CF). The tool changer is honestly what sold me on the idea.
For those who own one: how's reliability been, and how are firmware updates and spare parts, especially shipping to the EU? I could also wait a few months for the Qidi Q3D or Elegoo's Centauri X Ultra, but this deal looks hard to beat. Would you buy now?
r/FlashForge • u/Professional-Ad376 • 8h ago
Printing and it stopped extruding and made a clicking sound. Tried all the normal fixes and nothing happened. Took it apart about as much as it can be and found filament in the extruder gear. How/can this be fixed? Do I just need to order a new part?
r/FlashForge • u/Unable-Investment-72 • 9h ago
Brand new AD5M, flashed firmware to Forge-X, although it done it on the stock firmware. Forge-X keeps a 30-40MB RAM buffer, so it's not a ram issue. I've read it could be a slicer issue, but I want to make sure. Thanks for looking.
r/FlashForge • u/heynowjerry • 9h ago
I'm new to printing, and simply a hobbyist, yet have good tech skills.
New unit, updated firmware, IFS. Using Flashforge MacOS desktop S/W.
Printing with EGELOO filament rolls.
Printed about 10 small items to learn and everything looked fine.
Then I printed a larger enclosure AND lid for a ESP32 breadboard. This is where Ithe problems began.
I printed them together and had a mess, cleared the nozzle which had residual filament, and then printed the lid alone. all good.
Not I can't get a good print from anything.
I created a test print to get the base layer correct. I've tried calibrating from the physical printer interface.
Any thoughts, and Thank you in advance?

r/FlashForge • u/Ok-Finding731 • 9h ago
Hi. I have a Flash Forge creator 5.
And I have a problem with the pressure advance test. It is that the numbers don't print properly.
Does anyone else have this problem.
And does anyone know how to solve it.
Want layer hight should you calibrate the test.
Thank you.
r/FlashForge • u/Jacksonfire32 • 15h ago
Hey everyone I got this printer yesterday.
It’s my first type of multi material printer and there are so many of these little blobs. It’s not even funny. They’re getting everywhere and a few of them even made it into the print walls and caused the print to have these little imperfections has anyone got any tricks or tips to try minimise this?
r/FlashForge • u/Nancya-Lawson • 19h ago
My favorite part is how the little blue details on the headpiece and the two side pieces stand out in the dark. The last photo shows what it looks like with the lights off.
They printed it on a Creator 5 with a 0.4 mm nozzle and a 0.2 mm layer height. The slicer estimated 2 days 22 hours on the multi-tool setup vs. 8 days 23 hours on a single-nozzle setup for this model. The multi-tool estimate also came in nearly 2 kg lower on filament.
This was printed by 油七桶, a maker on Bilibili. I work at Flashforge, and we worked with them on this project. I’m sharing the photos with their permission.
What would you print with just a few details that glow in the dark?
r/FlashForge • u/Optimal-Level4237 • 20h ago
Anybody living south of Nashville, Tn feel like stopping by to do the maintenance and tighten the belts on my AD5M?
I haven't turned it on since I got the Creator 5 two weeks ago. I did the service on my AD5M Pro and Kobra X before the C5 arrived. And now, the maintenance warning just popped up on my U1 too. Luckily, the Kobra 4 is too new to need maintenance.
Geeze, can't a man get a break...
r/FlashForge • u/Slight-Hedgehog259 • 1d ago
As the title says, I can't open the rar file to print the enclosure. I usually use winrar for all my zip and rar files, but I keep getting a error saying the archive is either an unknown format or damaged. Any suggestion for a different app/program that works?
r/FlashForge • u/WORLD_3D • 1d ago
r/FlashForge • u/powderedtooaastmaan • 1d ago
My prints seem to get stuck right after the brims print.
I've tried the hinges plate and also one of the upper sections. (middle plate in 3mf file). Both stop after brims are done.
The black blob is where it stops. I can't pause the print as it just freezes. Only way to move on is to cancel.
Any ideas what's causing the freeze. I print other files with no issues? Only had this with the 3mf file from the flashforge site.
r/FlashForge • u/OgreVikingThorpe • 1d ago
I have enabled multi-device support in Flash Studio 1.7.22 and restarted. Both of my Creator 5 Pro devices are on current firmware and online. They do not appear in the list of devices to add under the Multi-device menu items…what am I missing?
r/FlashForge • u/Cartgamingyt • 1d ago
I know this might be getting annoying, but OpenCreator is probably the best firmware for Creator 5 series printers, for plethora of reasons, I'll spare you all the details but here's the newest highlights:
VFA compensation - Up to 50% better than stock
Ai Detection - Run locally on the printer with ZERO overhead
Klippain Shake & Tune Support - Plugin available for download from the catalog, run on the printer with no Pi
What seemed impossible is possible with enough sticks and stones.
r/FlashForge • u/Vivid-Equal9121 • 1d ago
Hi all!
On my AD5M printer, once I send a part to print, it begins heating the bed and the extruder. However, after the extruder reaches 225°C, the print head jumps to the middle of the far side of the bed and starts cooling down to 140°C. Then, the printer moves the extruder around the bed a bit, jumps to the exact center of the bed, heats the extruder back up to 225°C, and begins printing normally
This started after a firmware update from 3.1.5 to 5.1.7. I assumed it was a firmware glitch and updated to the latest version, 5.2.0, but the problem persisted
What should I do about this problem? Everything was fine on firmware version 3.2.7.
r/FlashForge • u/gentlegiant66 • 1d ago
Is it really necessary for c5 to go through the whole song and dance to prime the nozzle, when doing a single colour print. is the purge line not enough to prime the nozzle?
I know it doesn't take long to purge but honestly feels a bit of a waste.
r/FlashForge • u/baqirdmj11 • 1d ago
So my ad5x was printing but then i realized that it was digging in my build plate it worked like a CNC and not a 3D printer
r/FlashForge • u/Optimal-Level4237 • 1d ago
Anybody living south of Nashville, Tn feel like stopping by to do the maintenance and tighten the belts on my AD5M?
I haven't turned it on since I got the Creator 5 two weeks ago. I did the service on my AD5M Pro and Kobra X before the C5 arrived. And now, the maintenance warning just popped up on my U1 too. Luckily, the Kobra 4 is too new to need maintenance.
Geeze, can't a man get a break...