Has anyone taken delivery of a Topolino in the US?
So far my local dealer is telling me they can’t sell the 2026 until it is retrofitted.
So far my local dealer is telling me they can’t sell the 2026 until it is retrofitted.
r/Fiat • u/NanoContractor • 21h ago
I’ve been slowly rebuilding this 1608 Lampredi. Anyone have any good tips or opinions? I was thinking of adding some Ferrari yellow accents.
r/Fiat • u/mr_travel_hat • 1d ago
Hi everyone,
For the past few days, my Fiat Panda has been indicating that the boot is open, even though it isn't.
I tried manually engaging the latch with a screwdriver. The boot light switches off correctly, but the dashboard still shows the boot as open. I've read online that there are two separate switches.
The lock is a Fiat part, number 51876008.
I've checked the pins: pins 1 (counting from the tab) and 3 are shorted when the latch is open, and the circuit opens when the latch is closed. I assume these pins control the boot light, as I've tested the same connection on the wiring harness and the light does indeed turn on.
Which pin sends the signal to the body computer? And which pins control the electric boot release mechanism?
I'm assuming the problem is the lock itself, but I could be wrong.
Any suggestions would be greatly appreciated!
Ciao a tutti, è da giorni che la mia Panda mi segnala che il bagagliaio è aperto. Non è così.
Ho provato a forzare la chiusura della serratura con un cacciavite, la luce del bagagliaio si spegne correttamente, mentre il computer di bordo continua a segnalare il bagagliaio aperto. Ho letto in giro che ci sono due "interruttori a parte".
La serratura è la fiat 51876008.
Ho verificato che il pin 1 (contato dalla linguetta) e 3 sono in corto quando la serratura è aperta e si apre il contatto quando è chiusa. Immagino sia quello che comanda la lampadina (ho provato la stessa cosa sui cavi ed effettivamente la lampadina si accende.
Quale pin invece manda il segnale al computer di bordo? Quale invece è il comando dell'elettroserratura per aprirsi?
Sto dando per scontato che il problema sia la serratura, magari non è così. Suggerimenti?
r/Fiat • u/PensionImportant5299 • 5d ago
My punto had had an engine oil pressure warning light pop up. This happened when I was going down a hill and had to break sharpish. I was 5
Mins into my journey on a cold morning, around 5 degrees. Oil level looks fine in engine.
Do I need to worry ?
Edit:
Light warning came on for a split second then went off. It hasn’t been back for the rest of my journey
r/Fiat • u/ministigma • 6d ago
I found this plastic piece on the floor of my car and I can’t figure out where it came from or where it fits.
Hello, I have a 1.3 Multijet Euro 5 with 225,000 kilometers on it. If the car sits for a long time, it doesn't start on the first try. Sometimes I have to crank it about 10 times before it finally runs. Once it does start, it doesn't blow any smoke. On subsequent attempts, it starts up perfectly fine without any struggle.
Also, in the morning, if I just turn the ignition on and off 8-10 times and then actually crank the engine, it fires up on the first or second try. What could be the reason for this?
Thanks in advance for your answers.
r/Fiat • u/AbarthCabrioDriver • 7d ago
Not sure how many more days like this we'll have
r/Fiat • u/BrazilianClassicCars • 8d ago
Top speed: 195 km/h (121 mph).
0–100 km/h: 9.2 seconds.
Engine: 1.4L (1,372 cc), 4-cylinder, 8-valve.
Engine position: Front-mounted, transverse.
Fuel: Gasoline.
Fuel system: Multipoint electronic fuel injection.
Turbocharger: Garrett T2.
Boost pressure: Approximately 0.8 bar.
Maximum power: 118 hp at 5,750 rpm.
Maximum torque: 17.5 kgfm (171.6 Nm) at 3,500 rpm.
Production period: 1994–1996.
Brazilian production: Limited production of approximately 1,800 units
r/Fiat • u/EfficientCommand99 • 8d ago
I successfully activated both Android Auto and Apple CarPlay on my original Fiat Tipo Uconnect 7-inch system, without replacing any hardware.
Model: Fiat Tipo Station Wagon (2017)
Production date: 27 April 2017
Factory radio: Uconnect 7"
Firmware: 23.03.67.12
Hardware revision: 0.0.0.1
Android smartphone
AlfaOBD Android version 2.4.2.0
Vgate vLinker MC+ Bluetooth OBD adapter
No Windows laptop or MultiECUScan was required.
Total length: 160 bytes
Byte 157: 00
Byte 160: 01
I changed only byte 157 from 00 to 01, leaving every other byte unchanged.
I did not extend the PROXI configuration to 235 bytes.
Byte positions are numbered starting at 1.
Connected AlfaOBD to the Delphi Body Computer.
Backed up the original PROXI configuration.
Cleared existing ECU fault codes.
Wrote the modified 160-byte custom PROXI configuration.
Waited until AlfaOBD confirmed successful completion.
Immediately performed the full PROXI alignment without switching off the ignition between the two procedures.
All modules completed their alignment successfully.
Switched the ignition OFF and waited approximately 10 minutes.
Switched the vehicle back ON and connected an Android phone via USB.
The Android Auto logo appeared, and Android Auto worked immediately!
I subsequently connected an iPhone via USB, and Apple CarPlay also worked.
Android Auto: Working via USB
Apple CarPlay: Working via USB
Google Maps, Spotify and other apps: Working
Steering-wheel controls: Working
Parking sensors and reversing camera: Working
Vehicle settings: Working
Odometer: No flashing
Reconnection after ignition restart: Working
Overall performance: Smooth and reliable during testing
Wireless Android Auto/CarPlay and simultaneous hands-free calling with two phones have not been tested.
The vehicle had previously recorded P0130 and intermittent U1701 fault codes. These were cleared before the successful procedure. Clearing existing codes is not necessarily a requirement for activating smartphone projection, and recurring faults should be diagnosed separately.
This was a successful real-world test on one vehicle, not proof of compatibility with every Fiat Tipo or Uconnect hardware revision.
PROXI programming carries a risk of electronic configuration failures. Save the original configuration, verify compatibility and use a suitable stable battery-support supply during programming. Do not blindly copy these changes to an incompatible vehicle.
I hope this helps other Fiat Tipo owners activate Android Auto and CarPlay without replacing their factory radio!
r/Fiat • u/Fantavox02 • 8d ago
Hi! I own a Panda 100hp and I'm looking to add some interior lighting. Just for now I'm looking to add footwell lighting.
I want to try and get the same tone of orange/amber as the dashboard lighting. Does anyone have any suggestions of lights to get? Also any other help would be appreciated :p
r/Fiat • u/speedstar318ti • 9d ago
r/Fiat • u/Icy_Mention1277 • 8d ago
I was going like 30km/h when suddenly car just started to lose power i drove like 100 metres like that until i pulled to a parking then check engine turned on after it was blinking for a few seconds. I turned on the engine and there is knocking sound like in video. Does anyone know propable cause? I wanna know if engine just gave up on me or this is somę minor things like ignition coli or spark plug which i hope it is. When it’s not knocking it also sound a little different maybe a bit like a diesel.
r/Fiat • u/Silversoul07_ • 10d ago
Hello guys, I own a Fiat Grande Punto 2008 (3 doors).
I already installed an Android Auto Screen and it came with a reversing camera which I did not install by myself.
Is there any guide or tips for installing it?
Thanks!
r/Fiat • u/matchaflor • 11d ago
Okay so! I have a 2015 Fiat 500 that’s been driving perfectly. Recently I just haven’t had a need to drive but i’d been taking it around my apt complex just so i didn’t leave it sitting too long.
I drove the car about 5 days ago and it was very very low on gas but driving perfectly.
Yesterday i go to start the car and it won’t start at all so i figured i needed to put gas in it.
-1 gallon, i start the ignition and it makes a clicking noise and ALMOST turned over then no luck
-Put another gallon and this time just a clicking noise
Tried to jump start the car and had absolutely no affect
Do you guys think 2 gallons was enough or am I looking at a bigger issue? It’s $150 to tow the car to a mechanic and i’d hate to pay that just for it to end up being low fuel