r/FSAE • u/Shiraoki-sama • 16m ago
r/FSAE • u/SmoothMetal7080 • 53m ago
Formula Student headrest – how do you attach the foam and cover to the mounting plate?
Hi everyone!
I'm working on the headrest design for our Formula Student car, and I'd like to know how other teams manufacture and assemble theirs.
Our current design has a metal backing plate attached to the chassis. We are looking for a reliable way to attach the foam padding to this plate.
I've seen different approaches used by other teams, such as:
Using hook-and-loop (Velcro) to attach the padded assembly to the metal plate.
Using adhesive or other mechanical fasteners.
I'd really appreciate it if you could share how your team does it.
A few questions in particular:
Do you attach the foam directly to the metal plate, or do you use a separate backing?
How do you secure the whole assembly to the mounting plate?
Have you had any issues with Velcro, adhesives or mechanical fasteners during technical inspection or testing?
Pictures of your setups would be especially helpful!
Thanks in advance!
r/FSAE • u/Correct-Feeling-578 • 1d ago
Competition FSCzech Going Full Electric thoughts?
What do you think about the way they presented this information and especially about their feedback in the comments?
In my opinion it is quite unacceptable to respond with memes and not reasons and real answers.
I understand that more teams want to compete with electric vehicles than with combustion ones, and that the spirit of Formula Student is about development, innovation and following global technological trends. Still, I believe the combustion engine continues to play a role in modern machinery, and CV teams deserve a place in the competition.
https://fsczech.cz/registered-teams-2026/
This decision is particularly hard on the Czech CV teams. There may be only three of them, but FSCzech is their home competition, where they can present their work to their sponsors. At the very least, the change should have been announced before they began developing their new cars.
What are your opinions on that? And seriously check out that comment section (imo its a bit of a PR disaster)
r/FSAE • u/Free_Answer9547 • 20h ago
How To / Instructional 1st Year team need advice
Hi everyone,
We are a brand-new, first-year Combustion Vehicle team preparing for Formula SAE Italy 2027 (still deciding between entering Class 1 + Class 3 or starting with Class 3 only).
Right now, we are struggling to establish a clear, structured engineering workflow. We’ve read through the rules and searched past threads, but we are still unsure about the exact sequence of early design decisions.
Any advice on a realistic first-year roadmap, common pitfalls to avoid, or recommended foundational resources would be hugely appreciated.
Additionally, we’ve heard that some alumni and experienced members occasionally mentor newer teams. If anyone is open to offering occasional guidance or reviewing our early progress, we would be honored to connect.
Thank you all in advance!
3 element torsion bar pushrod front suspension
I know that torsion bar suspensions are not very common in fsae because of cost and complexity but i figured that you still might find this interesting.
The suspension in the video is very simmilar to what f1 cars in the late 90s to early 2000s, lmp cars and modern LMH/lMDh cars use/used. Modern f1 cars use a different layout with rockers that are angled upward and the torsion bar not being mounted to the front bulkhead.
The suspension in the video is from a project car i am working on for my highschool graduation.
I used the CAD platform Onshape to create and animate the suspension and the rest of the car.
r/FSAE • u/Dependent-Team1897 • 1d ago
Electrical T.9.2.6 Rules Clarification
We are switching to a 12v lithium-ion battery this year to reduce weight and improve reliability. I was reading the rules for it and I was wondering if I could get clarification from teams who currently run lithium-ion batteries for rule T.9.2.6.

We plan on running Antigravity ATZ10 RE-START Lithium-Ion Battery. https://www.partsgiant.com/p393215-antigravity-re-start-lithium-ion-battery?m=17329044&msclkid=ca165ee325b31c6a6a22341a00b95447
We submitted a rules request for this among other questions over a month ago and we haven't gotten a response yet. Any help is appreciated.
r/FSAE • u/kremdog12 • 1d ago
YFZ450r Ball Park IGN Advance
Alum trying to get the 2018 Iowa State car going again. Runs a YFZ450R, E85 Should be 14:1 compression but i dont know the full build of this engine (was the dyno/test mule).
Anyone have a stock ignition curve for this engine or a ballpark ign advance?
Current tables i have from the team have about 40deg all in at 12k rpm, at full load and partial throttle (says to me either there's too little advance at part throttle or too much at WOT). Would think the chamber design on these is pretty efficient with a fast burn so 30deg+ over the power band does seem like a lot. My only tuning reference is a small block ford that turns a fraction of the RPM but has a max advance of 29deg at WOT.
r/FSAE • u/SeaworthinessUsed730 • 1d ago
I have an interview with a team
Since I started engineering I’ve always wanted to join a FSAE team since I love Motorsport. I’m applying to the EV powertrain department.
The interview will have some technical questions, if any powertrain engineers could give me some tips in which technical aspects should I focus on my study it would be an amazing help !!!!
r/FSAE • u/moonandstars_44 • 2d ago
Career in motorsports!
reddit.comOKAY GUYS
Im getting the opportunity to choose the mechatronics and robotics society of my school.
Should i take it, will it help me in the future for motorsports or aero?
r/FSAE • u/thodoris-tyrovouzis • 2d ago
Making a budget 1-1 scale driverless racecar
r/FSAE • u/Blacksheeps909 • 3d ago
Marketing Something a little different for this year's UC Motorsport reveal!
hey there, thought I'd share our UCM26 reveal trailer from UC Motorsport here in New Zealand!
we wanted to do something a little different for this year's car reveal, taking a more cinematic approach with red particles, lighting and glimpses of the car's geometry gradually building up to the reveal.
following our overall win at FSAE-A in 2025, we've been putting a huge amount of work into UCM26, both on the engineering side and how we present the car.
pretty happy with how the trailer turned out, thought you guys might appreciate it!
r/FSAE • u/Quiet-Comedian-3813 • 2d ago
Off Topic / Meta Exporting My Godot Vehicle Simulator as a Plugin
Hello everyone! I recently officially released my project as a plugin this week. So, I made a little video to spread the word. This is a major milestone for the project so try and keep up!
Video: https://youtube.com/shorts/pDHGp1ocZVY?feature=share
Drop a star on Github, it supports the project a lot!
Project: github.com/kakoiihito/Shift
Question CFD selection
I’m a new member of FS team and our university provides Ansys fluent and Siemens Star CCM+.
Please let me know the advantages and disadvantages of these 2 softwares and which one should I study in the first year.
r/FSAE • u/Delicious-Set6775 • 2d ago
Hello
This is an intake manifold for a Yamaha Fazer 600. Do you think this design is okay? The simulation was performed at inner 14.7 PSI, the wall thickness is 7 mm, and the material is PA-CF6. Any suggestions or feedback would be appreciated!
r/FSAE • u/moonandstars_44 • 3d ago
Off Topic / Meta Career in motorsports!
Hi guys! Im a first year student pursuing mechanical engineering right now. Im interested in motorsports career but the fsae team here doesn't seem much reliable and i don't wanna waste my time in that society but i just wanted to ask Is it possible to make a career in motorsports regardless of if im in my unis fsae team
If so, can anyone guide me on what i can do or make in my first year so i don't lag behind!
I'd appreciate any help i get
r/FSAE • u/Ok_Abies_3755 • 3d ago
JLCPCB Sponsorship Program 2026
Has any team received sponsorship from JLCPCB through the Brand Advocate Program?
In 2026, the company started a new sponsorship program for influencers, maker communities, and technology projects. We filled out the application form some time ago, but we haven't received any response yet.
I would like to know if any team has already received sponsorship through this program or if other teams are also waiting for a response.
r/FSAE • u/Ofitus21 • 4d ago
Virtual FS Alpe Adria IV to be held 1st-3rd December, registration open for teams until November 22nd
Virtual FS Alpe Adria returns for its fourth edition on 1-3 December 2026, bringing the Formula Student community together for another round of racing.
Last year 119 teams competed across 6 semifinal races, with the top 24 advancing to the big finals, and PGRacing from Poland claiming overall victory. The event featured plenty of wheel to wheel Formula Student racing in Assetto Corsa, but also big points were on the line on the Driverless challenge powered by IPG and the livery design challenge. Not to mention the fun that came through the Alumni Cup races.
Just like last year, top teams can earn their way to the real FSAA 2027 competition, as the best performing teams will have a spot reserved for the 2027 real event.
Registration is open until November 22nd for both teams competing and former members wishing to enter in the alumni cup. All details on the official Discord of the competition: https://discord.com/invite/JQhHe6vKh2
r/FSAE • u/CompAssistApp • 4d ago
Question I built a free laminate stiffness calculator for FS teams — would love feedback
I'm a composites engineer in Detroit, MI. I built a small web tool, Comp Assist, that I have been using to size a flat laminate before cutting kit: stiffness along the length and width, cured weight, and material cost.
The free Basic tier is meant to be useful for student teams. It includes T300 3K twill, T700/12K twill, TR30S 3K twill, 7781 8HS glass, and UF3376 epoxy, and it will keep three layups in the browser. Results are written in plain language and compare stiffness with aluminum, plywood, fiberglass, and steel. There is a CSV export of the ply table, weight, and cost. It is classical laminate theory for preliminary design only. It does not replace test-based allowables, and it does not cover buckling, delamination, fatigue, or SES compliance.
There is a paid Pro tier with unidirectional and aramid materials, engineering moduli, ABD matrices, and unlimited layups, but I am not here to sell that. I would rather know if the free version is actually helpful.
The tool is here: https://comp-assist-delta.vercel.app
I would really value feedback from people who have laid up aeroshells, floors, or other panels:
Are the Basic woven carbon and 7781 glass options close to what your team actually buys, or do you need unidirectional on the free tier for this to be useful?
Is "stiffness along the length vs aluminum" the check you would run before a layup, or would something else help more, such as reaching a target stiffness at a given panel weight?
If you have a stack you already trust from a spreadsheet or a coupon test, does the stiffness result come out in the right ballpark? If not, I would like to know where it is off.
Happy to answer questions, and thanks for any blunt feedback.
r/FSAE • u/MedicalFly5741 • 4d ago
[FSG Rules / SES] T.3.16.1 vs SES: 30 kN or 15 kN for bolted tubes in the Primary Structure?
Hi everyone,
I’m the Chassis Lead for EPSA (Formula Student team from École Centrale de Lyon), and we are currently running into a grey area between the rules and the SES regarding our tubular chassis design.
We want to add a bolted tube at the back of the Rear Bulkhead to close off the HV battery access (see attached picture). Since this tube is part of the Impact Structure—and therefore the Primary Structure—we are trying to properly size its attachment brackets, but we found a contradiction between the rulebook and the 2026 SES spreadsheet (which we are using while waiting for the 2027 SES template):
On one hand, T.3.16.1 states that if two parts of the primary structure are bolted together, each attachment point must withstand a 30 kN load. Since a tube isn't considered a panel or a plate (as defined in T.3.16.5 / T.3.16.6), our takeaway is that our bracket should be subject to this 30 kN requirement.
On the other hand, the 2026 SES only requires these exact same inserts/attachments to withstand a 15 kN load (see attached screenshot)—which is the value we based our design on last year.
Our hypothesis: Section T.3.16 was likely written primarily with monocoques in mind, meaning the 15 kN load requested directly in the SES is actually sufficient for a tubular attachment system.
Before we submit an official rules question (or while waiting for an answer), has any other team run into this specific discrepancy? Do we need to comply with T.3.16.1 (30 kN) or does it fall under the 15 kN SES requirement (similar to T.3.16.6)?


r/FSAE • u/OkContest9144 • 4d ago
CURRENT SENSOR FOR BSPD
Hey,
We're using the LEM DHAB S/106 (Ch. 2, ±500A) for our EV's analog BSPD. For a 5kW limit at 600V (~8.33A), our target trip delta is only 33.3 mV above the 2.5V baseline.
Quick questions:
Is a 33.3 mV delta too prone to false trips from inverter noise on an analog comparator board?
Do teams use an external op-amp right at the sensor, or is RC filtering + shielding enough?
Are there any other analog current sensors you'd recommend that give a better voltage range for this?
Datasheet: https://www.lem.com/sites/default/files/products_datasheets/dhab_s124_v5.pdf
Thanks!
r/FSAE • u/TallPop1104 • 4d ago
2009 CBR600RR FSAE idle issue:MAP stuck at atmospheric pressure and RPM surge
Our team is struggling to get our CBR600RR to idle, and we would appreciate some advice.
Our setup
Engine: 2009 Honda CBR600RR
Intake: Custom 6 L plenum
Throttle body: AT Power FSAE throttle body
IACV: Removed
MAP sensor: Mounted in the center of the plenum, but its reading stays at atmospheric pressure
Injectors and ignition coils: Stock CBR600RR parts
We originally planned to run the engine with an ECUMaster EMU Black standalone ECU. We tried changing the idle fuel and ignition settings, but could not get a stable idle. With the competition approaching, we switched to the stock ECU with a Power Commander V. We still use the EMU Black to log MAP, coolant temperature, oil temperature, and oil pressure.
The MAP reading does not change with throttle position, even when we open the throttle fully. We checked the wiring and have not found a problem. Could the location of the sensor in the plenum cause it to read atmospheric pressure all the time?
At its maximum setting, the throttle stop on our AT Power throttle body holds the plate about 7° open. We calibrated that position as 0% TPS in the Power Commander, but the engine still would not idle. At around 20% TPS, it barely runs near 1,000 RPM and often stalls. At 25% TPS, it initially rises to about 2,000 RPM. If we hold it there for a few seconds, the RPM suddenly climbs to 6,000–7,000. These TPS percentages are the Power Commander readings after calibration.
The throttle stop uses an M5 screw. We are considering buying a longer M5 screw so we can set the stop at about 25% TPS. Given the RPM surge we see at that position, do you think adjusting the stop this way could help us find a stable idle, or would it make the problem worse?
We wondered whether the engine was misfiring at the smaller throttle opening, then began burning the mixture more consistently when it got enough air at 25% TPS. Could accumulated fuel contribute to the sudden RPM rise? What else should we investigate?
We understand that a large plenum can slow throttle response. Could the 6 L plenum also make it harder to achieve a stable idle? We would appreciate any experience or advice on the relationship between plenum volume and idle behavior.
r/FSAE • u/Quiet-Comedian-3813 • 4d ago
Official Release of Shift: A Godot Vehicle Simulator
Hello everyone! For the past year, I have been working on a vehicle simulator/physics plugin on Godot. I am happy to announce the project has been released as a plugin on v1.0.0. I hope to work on this project for the years to come and grow it to be massive.
Drop a star on the project, it supports the development a ton!
Project Link: https://github.com/kakoiihito/Shift