r/FN509 • • Jan 03 '22

8-9 lb trigger pull ?

I am very familiar with long rifles and such, and am newer to the pistol game. Was excited to pick up my first FN 509T. I could tell instantly the trigger on this pistol was extremely poor. It is very rough and extremely stiff. I tested the pull weight with my Wheeler trigger gauge, and it consistently shows 8-9 lbs pull. I know FN says normal pull is 5.5-7 lbs. Luckily I joined this group and ordered an APEX trigger based on all the raving reviews, but I was curious, if I had not, would you have returned the pistol to FN to fix ?

0 Upvotes

29 comments sorted by

5

u/Booyaah_rumham Jan 03 '22

I put the MCarbo spring kit in and it made a dramatic difference in trigger weight and smoothness.

2

u/Gask3t Jan 03 '22

Seems like a much more economical option than the APEX trigger I just ordered.....I wonder if you can do both ?

2

u/thenameisnando Jan 04 '22

Trigger is no pain at all to get in, but do get the disassembly fixture to remove the pin and have all the tools they recommend. Will make all the difference.

1

u/Gask3t Jan 04 '22

Done and done

2

u/thenameisnando Jan 04 '22

When you get it, leave 2 hours open and grab a few beers and enjoy the feeling of installing your own trigger

2

u/Gask3t Jan 04 '22

Ha will do.

1

u/Booyaah_rumham Jan 03 '22

I don’t see why not. I just know the Apex trigger is an absolute pain to get in. The spring kit took a little time, but it was super easy.

2

u/WhiteLight64 Jan 04 '22

The stock trigger is crap, but, it’s striker fired, not hammer fired so I suppose this is to be expected. I think it’s worse than my gen3 Glock. I installed the mcarbo kit, and didn’t like that either. I even tried several combinations of springs that it came with and although the pull weight was less and smoothness was up, it felt unsafe. I’ve used an apex on a buddy’s 509 and it was far better than the carbo option. Still, if someone wanted to trade me a gen5 Glock 19 or 17 for my 509, I’d probably take them up on it. My $0.02.

1

u/Gask3t Jan 04 '22

Wow. What made it feel unsafe?

2

u/WhiteLight64 Jan 04 '22

As in very, very little pull weight to fire. The familiar wall some people like was gone. The character of the whole trigger pull is muted.

1

u/redzaku123 Jan 04 '22

Is it a 509 tactical?

1

u/WhiteLight64 Jan 04 '22

No, 509 full size. Fde.

1

u/vietn9mm Jan 04 '22

My Polymer80 PFC9 trigger is way better than my FN 509c tactical smh … I was very hype to get my FN but wasn’t happy with the trigger…. I’m definitely working on getting the Apex trigger and the striker.

1

u/Gask3t Jan 04 '22

Why the striker?

2

u/BujuBeans Jan 04 '22

Factory FN striker is known to break.

3

u/a_mex_t-rex Jan 04 '22

Heads up, many people report light primer strikes after installing the mcarbo spring kit. It seems that the striker spring is too light, so they say leaving the factory striker spring but replacing the rest does the trick. I've done it and no issues so far at the range. 300 rounds

2

u/LBZinDC Jan 04 '22

I experienced this but only on carry ammo. I’ve put the stock striker spring back in but haven’t made it to the range to vet it yet (and put it back in the carry rotation). I’d still like to get the grit out of the trigger and haven’t had time over the holidays to try anything yet

1

u/a_mex_t-rex Jan 04 '22

Yeah I think your issue should be resolved if you put back in the stock striker spring. Mine still has grit but the break is very noticeably lighter. I'll be taking it apart this weekend and polishing contact points and see where it goes

2

u/LBZinDC Jan 04 '22

Yeah the trigger weight post-MCarbo was way better for sure. And not too tricky to put in

1

u/k0nfuze Jan 08 '22

Try polishing your sear assembly to get rid of the grit, that worked for me.

1

u/LBZinDC Jan 08 '22

Sounds good will try that thanks

1

u/k0nfuze Jan 08 '22 edited Jan 08 '22

I'm using the apex trigger, striker and mcarbo spring kit and have not had any light strikes at all, 300rds atleast.

1

u/Spbladermaker Jan 03 '22

Yeah. 509T is one of the worst triggers I’ve felt in a “combat” pistol. MCarbo was what I put in for my customer.

1

u/Gask3t Jan 03 '22

Appreciate the suggestion, I decided to order both the apex trigger and MCarbo spring upgrades. Be interesting to see how they both operate together.

1

u/PlagueOfDemons Jan 04 '22

No. WECSOG KTF.

1

u/pewdiepastry Jan 04 '22

After installing an Apex striker and shooting it a bunch the trigger definitely got a lot better. Mine was definitely more like 5 or 6 lbs. The only thing that I didn't like was the long travel of the trigger. Just updated to the Apex trigger after about a year and a half of using stock and it's definitely nicer but not as big of a difference if you have a broken in trigger. Btw the apex striker is a must in my opinion. I do not trust the stock striker

1

u/ConnectRadish Jan 04 '22

yes, return it for service

1

u/k0nfuze Jan 08 '22

I'm sitting with a 3 1/2lbs pull with the Apex Trigger, Apex Sear & Spring, Apex Striker, and full mcarbo spring kit. Very smooth. No issues what so ever. I have gone through and polished the gun, the sear assembly heavily. I've got the digital wheeler gauge which I've run 15 times with a 3 1/2lbs average. I could not stand the stock factory trigger and even with the apex, it wasn't great. The full mcarbo spring install and most importantly, the polishing along with use, cleaned it all up.