r/Electromagnetic • • Aug 20 '15

Reddit: Otherwiseyep provides an analogy for how electromagnetism works

Thumbnail
np.reddit.com
0 Upvotes

r/Electromagnetic • • Aug 07 '24

How does Electromagnetic forces cause bonding exactly.

0 Upvotes

So, I was wondering about what makes ionization dangerous since I hear about it in nuclear physics then I got to writing about it and a lot of questions of how exactly the electromagnetic force causes bonding came to me, so from the perspective of a hydrogen nuclei bonded in water with Oxygen the forces acting on it would be, I think? The 2 nearby electrons from its own and the one shared by oxygen, are the closest electrons and would attract the proton some and probably some other attractive force from the other electrons would be there too but I have no idea how much exactly just that it should probably be less than the other 2 and would the distance from the proton also depend on the shape of the orbital of that particular atoms? Idk but There would also be the 8 protons in the nucleus I have no reason to believe  each one wouldn’t be pushing on it so I assume all 8 have some effect on the proton but those are much further away so their force of x*8 would be cancelled out by the electrons at some point where it reaches equilibrium of push and pull and I believe this is how bonds are kind of formed in the sense of their distances from the other things would remain here, and when a atom is ionize like say that hydrogen gets hit by a high energy gamma and it ionizes it and releases 1 electron, I believe? At the very least the bond should get weaker as it loses some of its attractive force from the electron it would move away until the amount of attraction lost is made up by the weakening of the push from the extra distance it gains to the other protons. So is this how ionization works? And electromagnetism in bonds? Or does the entire atom somehow count as “neutral” to the electromagnetic force  or the electron clouds average  distance away from the nucleus would “cancel” out and not attract anything in a Neutral atom? I am Very interested in understanding this and how much I got wrong and maybe right? With my understanding of the electromagnetic force and things.


r/Electromagnetic • • Aug 30 '23

Death by Electrocution?

0 Upvotes

Suppose there are multiple vehicles around a person at any given time that are starting up, idling and revving, honking horns, etc. Would it be possible for these vehicles to generate enough power to electrocute said person? Also, could an object be inserted into a person to facilitate/cause their death via electric shock? I am thinking that this might have something to do with AC/DC currents.

I know this is a very strange and random question, but I am trying to understand how something like this might work. I am not even sure if what I'm thinking is possible. Any feedback would be greatly appreciated! I'll try to reply if there are any questions!


r/Electromagnetic • • Oct 02 '15

Making a pair of Electromagnetic shoes

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 27 '15

Electromagnetic hypersensitivity - RationalWiki

Thumbnail
rationalwiki.org
1 Upvotes

r/Electromagnetic • • Sep 12 '25

Little side project.... Still very much in progress.

Thumbnail
gallery
6 Upvotes

r/Electromagnetic • • Sep 07 '25

Need to supply 230VDC to 1800lb magnet

2 Upvotes

6000 watts is the goal. Anybody know of an affordable DC step up transformer that can supply 230VDC at 6000 watts?
Serial wiring 19 twelve volt batteries may not be overly realistic.


r/Electromagnetic • • Aug 27 '15

The Electromagnetic Spectrum Song - by Emerson & Wong Yann (Singapore)

Thumbnail
youtube.com
2 Upvotes

r/Electromagnetic • • Aug 30 '15

NASA - Tour of the electromagnetic spectrum

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 30 '15

Electro Magnetic Induction for XII Standard & IIT-JEE

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 20 '15

Should a Person Touch 200,000 Volts? A Van de Graaff generator experiment!

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 26 '15

DIY Super Electromagnet

Thumbnail
youtube.com
3 Upvotes

r/Electromagnetic • • Aug 21 '15

Electromagnetism (full show)

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 20 '15

BBC Science Documentary: Understanding Electromagnetic Fields

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 25 '15

Super-strong neodymium magnets destroying everyday items in slow motion

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 24 '15

The Magic of Electricity and Magnetism (documentary)

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 24 '15

How Magnets Work - The Force of Nature

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 25 '15

Metal being melted by an electromagnet

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 21 '15

Richard Feynman: Magnets and "Why" Questions

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Aug 20 '15

Maxwell's Equations and Electromagnetic Waves [Yale University lecture]

Thumbnail
youtube.com
1 Upvotes

r/Electromagnetic • • Dec 08 '24

Electromagnets: Any Obvious downsides to having 2 coils in parallel with X windings vs 1 coil with 2X windings?

2 Upvotes

(I tried asking in another sub reddit but they don't seem to understand electricity that well)
as an example:
if there are 2 electromagnets.

  1. a coil was wrapped around an iron core 200 times

  2. 2 parallel coils were wrapped around an iron core 100 times each

I am trying to reduce heat in a motor and one of the easiest ones to do is reduce joule heating
according to basic equations F=N*I and P=I^2* R. Running the second scenario would waste a lot less heat for a given current for the same amount of force

It seems pretty cut and dry but I never hear about this as solution so I wanted to make sure there wasn't some obvious flaw where someone would say "wow you think no one has ever tried that "


r/Electromagnetic • • Jan 17 '25

Ohio Magnetics Magnet Controller schematics need help

Post image
1 Upvotes

Hi, this is something my boyfriend is looking for some explanation on, because the F and U on the diagrams are not explained and he doesn't have much literature on it other than the troubleshooting manual the controller came with. So I'm including a picture of the schematics in hope that someone could explain it in lamens terms for the Master Switch specifically. Bf was saying it doesn't make sense for it to have more than two functions with just two wires, when there should be 4 functions (on, lift, drop, and off). He is wondering if it needs a ground? I don't really know anything about electrical controls or their symbols, but it looks like it makes sense that it needs to have an on/off, and a lift/drop switch. He currently has it wired to a button, and my thought was that it is only turning on and off, and nothing was signaling to lift/drop. He has a switch that might work, but only two wires for the functions so how would he connect it to the controller? Idk if any of this makes sense to anyone or if my lack of knowledge is churning a whole bunch of jibberish.


r/Electromagnetic • • Sep 21 '21

Induction Heating: Partially shielding metal part, so that not all of it is heated?

1 Upvotes

Sort of a weird question here:

We have a Induction Heating furnace with an oval coil at workshop. the coil is reasonably large to be considered "general purpose". And for this one specific Heat Treatment operation, when we put the work-piece is into the coil, it gets hot really fast, EVERYWHERE, but we need to only heat some "surfaces" of the work-piece, much smaller than the coil usually covers. Is it possible to make sort of a shield that covers other areas, selectively blocking the oscillating fields of the coil from reaching some areas, therefore only heating the exposed area of the work-piece?


r/Electromagnetic • • Mar 14 '19

Hey everyone! I am writing a blog thsts about taking a closer look at the theory and techniques we use every day as RF and antenna engineers. Please read if you are interested. This is my first blog.

Thumbnail
anotherfirethief.com
1 Upvotes

r/Electromagnetic • • Aug 17 '19

Capacitor charging help!!

2 Upvotes

I have a 440v ac capacitor and i have heard that i need a boost converter to charge it. The only problem with that is how, specifically, I connect that to the capacitor and battery(s).