r/DieselMechanics • • Dec 07 '19

How was your friday? You could say mine started off with a bang!

Post image
23 Upvotes

r/DieselMechanics • • Aug 05 '19

Its a slow day

Post image
16 Upvotes

r/DieselMechanics • • Dec 21 '19

How did you guys get started in this field?

12 Upvotes

Hey everyone, I’ve had a growing interest to become a diesel mechanic for some time now, and am having a tough time finding out how to get the training and certs that I need. I live in Massachusetts and the only program I’ve seen is through UTI for 30,000$, which I am not looking to do at all. Is there any way to get the training and certs without a hefty student loan? If I’m making 75,000 a year now could I make more as a diesel mechanic? Thank you for any insight and happy holidays


r/DieselMechanics • • Jan 14 '20

My first time

11 Upvotes

I am in the market for a 3/4 ton truck and decided to go with a diesel. This is my first time owning a diesel so I wanted to get some recommendations on which brands are the most reliable. I have heard that certain years are better than others as well. My budget is no more than $15k and I realize that amount will get me something with high mileage. Also, what are some things that are different about diesels from a gas truck, other than obviously the fuel type, that most people don't realize or things that need to be considered; perhaps things regarding maintenance?


r/DieselMechanics • • Jun 03 '19

Pretty sure that this diff. Is broken

Post image
10 Upvotes

r/DieselMechanics • • Jan 09 '20

Concerned wife here

9 Upvotes

Have any of your significant others complained of an ether smell to your breath?


r/DieselMechanics • • Jan 10 '20

CAT 307.1d plate lever cable snapped

8 Upvotes

Hi guys,

I got the CAT 307.1d mini excavator stuck recently in some heavy mud, which then froze and thawed and froze again, had to be retrieved today, bit of a disaster all round. The dozer plate lever cable snapped and I was wondering if this is an easy enough repair to do myself or will I need a mechanic and/or a specialised tool for disconnecting the old one from the valve and replacing it? Any suggestions, tips or advice would be really helpful. Thank's in advance.


r/DieselMechanics • • Dec 29 '19

I have very little Diesel experience but my family picked up this wrecked bobcat on a fire sale, so I decided to have a go at trying to fix it.

Thumbnail
youtu.be
7 Upvotes

r/DieselMechanics • • Oct 29 '19

Anyone know the spec on a trailer kingpins? What about this?

7 Upvotes

r/DieselMechanics • • Jun 04 '19

Help bleeding after filter change. The first bleed screw spits diesel. And I don’t get anything out of the second filter bleed screw. I’ve blown compressed air, fuel enters the second filter, fuel does not exit second filter. Help?

Post image
6 Upvotes

r/DieselMechanics • • Dec 24 '19

Advice needed from Heavy Equipment Technician

5 Upvotes

Would like to get some feedback from a heavy equipment technician about jobs because I am working on a website to help this industry and I would like some feedback. I will Venmo you $25 for your time. I appreciate in advance.


r/DieselMechanics • • Oct 12 '19

Transitioning into diesel mechanics

4 Upvotes

Hello, just wondering what it would take to transition from a aircraft mechanic to diesel mechanic? Been in the aviation maintenance for 12 years so I am mechanically inclined. Want to pursue diesels. Going back to school at 33 years old? I don't know..


r/DieselMechanics • • Jul 30 '19

I’m starting school soon

4 Upvotes

I’m going school to be a diesel mechanic starting in the fall any advice for someone like me, I’ve never really worked on diesels only gas , and it was only my 65 ford. What should I prepare for most?


r/DieselMechanics • • Apr 21 '19

Starting out

4 Upvotes

Hey guys I’m on this thread looking for advice in a career of diesel mechanics and I’m stuck between two choices of going to school and getting my associates in diesel tech or going to a tech school and just getting certified and was wondering what do they look for in this career path what do employers look for and what do you guys recommend


r/DieselMechanics • • Dec 22 '19

Hand oil pump recommendations

3 Upvotes

I’m looking for a hand powered oil pump I can use to pump oil out of a 2 gallon or 5 gallon oil pail up into an engine bay where there isn’t room to pour oil normally.


r/DieselMechanics • • Dec 06 '19

2006 Dodge ram 2500 batteries not charging.

3 Upvotes

I'm out of ideas on this damn thing. I've replaced both batteries within the last month and the alternator this week. I've talked with my step dad who is an old school diesel mechanic who suggested it may be in the relays but since it is an 06 they stopped using the old style relays. Where else do I need to start looking?


r/DieselMechanics • • Sep 28 '19

I by no means am a mechanic... BUT im trying to work on this bus that I have. I know virtually nothing about air brake systems. But I know my back right brake isnt engaging. This component is opening??? Its not making the notorious pshhhhst noise when releasing the brakes nor is it blowing out air.

Post image
3 Upvotes

r/DieselMechanics • • Jul 17 '19

Mack Engine help

3 Upvotes

I'm trying to find the oil temp sensor on a maxicruise aset ac-380/410 engine. Can't seem to figure out where it is at.. anybody know their way around this engine?


r/DieselMechanics • • Jul 01 '19

2005 Cummins eccessive black smoke and low power

3 Upvotes

A little back story to begin with I bought an 05 Dodge Ram 2500 5.9 Cummins a little while back. The motor was no good and was passing oil as cylinder 6 piston rings were shot. Had another motor that ran fine and decided to replace it instead of rebuilding.

Replaced the motor and got the injectors bench tested and two failed so I rebuilt them. Was driving it and all of a sudden a loud knock and white smoke out the rear. Towed it to my shop and cracked the injector lines hoping to find the culprit of the knock and it was one of the injectors I did not rebuild that the leak dropped and was pouring into the cylinder. Got the remaining injectors all rebuilt and put it together. After I put it together I found that it had a LOT of black smoke off the start and seemed to lack power off the go. I thought maybe the catalytic converter was clogged so I removed it and ran it that way. Same problem. Checked for any boost leaks with the smoke machine and found none. Made sure the waste-gate was opening at the correct psi and it was. Checked boost pressure and I was getting good boost from the turbo. Pulled injectors and did a compression test and had near 450-500 psi in every cylinder. Also I have no codes at all aside from a wheel speed sensor.

I’m not sure what to do next. But I am going to send the injectors to a different guy to bench test to see if it was a shitty rebuild. If anyone has any suggestions I would really appreciate it. Thank you.

(Bad formatting on mobile sorry)


r/DieselMechanics • • May 17 '19

Did the mechanic mess up my manifold? Sounds like a chooChoo now but they say it's fine!

Post image
3 Upvotes

r/DieselMechanics • • Dec 10 '19

Update/next question. 2006 Dodge 2500 battery charging issues

2 Upvotes

Since my last post I have bought a multimeter and seemingly fixed my grounding issues so I'm on to the next problem. After charging the battery over night last night I started it up this afternoon and ran down the road. It never charged above 12ish volts. When I got back home I checked again with my new multimeter and the passenger side battery was getting somewhere around 18 volts and the driver side around 11. And when I ran the codes this is what came up https://imgur.com/a/wndcGNB

So what do I do now?


r/DieselMechanics • • Nov 14 '19

2005 Thomas/Freightliner C65 TCM Location

2 Upvotes

I've got a Thomas built bus, Freightliner C65 with a Caterpillar engine and an Allison 5 speed automatic transmission. I believe there's an issue with the TCM, but am not sure where the thing is located. Does anybody here know where I could find it? I called a local dealer and they said they thought it was attached to the frame near the transmission or behind the steps, but I've looked and can't seem to find it. The main wire bundle goes directly up to somewhere around the firewall, but if I can get some help on locating it, it would save me the trouble of taking apart things I don't need to looking for it.


r/DieselMechanics • • Sep 25 '19

asking for recommendations

2 Upvotes

Looking at getting a used diesel pickup, ideally in the next year.

Are there any trucks or engines from the past decade or so that have a reputation better than the rest? (all makes welcome, but i do like the way fords look)

Edit: Asking here specifically because if anybody can at least point out the lemons, it's mechanics


r/DieselMechanics • • Sep 17 '19

25 (F) hopefully starting school soon

2 Upvotes

Any advice? I grew up working on cars with my dad. And I wanna work with my hands and learn new things. I’m going to a votech program.


r/DieselMechanics • • Sep 12 '19

Need help identifying this wabco compressor engine is on a stand. Unknown age or truck it came from.

Post image
2 Upvotes