r/Decks • • 57m ago

Tension ties needed on freestanding deck?

Thumbnail
gallery
1 Upvotes

Building a 24x16 freestanding deck. Beams are hung off the posts with HUC Simpson fasteners. Plans are engineered. It appears there is no consideration for lateral tension in the plans. Is that necessary with a freestanding deck? I'll have knee bracing in each corner and steel strap X bracing across the entire deck. Do I need to add any lateral tension ties on at least the corner posts?


r/Decks • • 3h ago

Framing

2 Upvotes

I see some builders using “KDAT” lumber. Is that worth paying the extra money doing the wood that way? Otherwise is normal treated lumber still okay to use? Not worthy I’d be buying composite of that matters for which lumber to use


r/Decks • • 4h ago

Layout question for first time deck

Thumbnail
gallery
1 Upvotes

First time posting here and I need some help. I've been working on a rebuild this fall. It's part rebuild and part add-on to make quite a large deck. Because of this, there's been some "Frankenstein" work done to connect what's old to what's new, and to shore up some of the old stuff that frankly wasn't done well. I've done what I can, and I know some of it is not what the community at large recommends (i.e. bolts through beam/post in some areas). The upper blue part will be replaced as well as some of the rotted posts sitting on the deck, so save those comments for now.

The deck previously ended straight across from the diagonal breaker board but the space was too small to be functional. I extended the footprint about 9 feet out to have a large space for entertaining. I want to picture frame the deck and have added blocking to do so.

#1) How can I ensure that my boards will line up properly across the diagonal breaker board with what I've already completed? I feel I need to get the first one or two boards set, and then lay rows in both directions out from the middle so that I can measure and ensure I don't end up with slivers of a row at the end.

#2) How would you finish this inside corner where the stairs will start if I am doing the picture frame method. The board spanning the entire width of the deck will likely not line up perfectly at the front of the stairs, so my first step will likely be built out on my stringer.

Hopefully that makes sense and you all can give me some guidance. I included a rough sketch at the end to give you a general sense of the layout

tl;dr - how can ensure my boards line up accurately across diagonal breaker board? How do I finish inside corner to end picture frame and start stairs?

Thank you!


r/Decks • • 5h ago

Exterior wooden stairs/landing rebuild- what to look for when hiring contractor? California E3/Sb 721

1 Upvotes

Location- Los Angeles, California.

I have an older compact two story wood frame staircase with two landings- it is covered on three sides, covered under the roof overhang and open to the elements on one side.

I mistakenly thought staircases did not fall under E3/Sb 721 inspection b/c there is no balcony.

But I am wrong and out of compliance :(

Its an old staircase (at least 25 years old- was in place when I moved in) and I had planned to replace some old stair treads, one short stringer, a post and some other parts w/small termite damage but since it falls under E3/Sb 721- I'm considering replacing it completely- the stairs/frame feel solid but I'm not sure if its up to code since its over 25 years old?

I have NO IDEA what to look for when hiring a stair/deck contractor especially after hanging out here and looking at some of the builds posted- some amazingly beautiful and too many amazingly terrifying ones!

I know the same contractor can now inspect and fix which sounds good in one aspect but not in another... I am avoiding the sponsored results and ones w/terrible AI graphics that emphasize large potential fines.

Can anyone recommend a good and hopefully affordable contractor to rebuild a wood staircase in LA?

Is there a specific contractor license to build stairs?


r/Decks • • 6h ago

Deck remodel

Thumbnail
gallery
1 Upvotes

I'm trying to make sense of what was done with deck installation. I want to install a proper ledger board, tie it into the house, and start removing and replacing deck joists. Do I temporarily support the deck and start cutting back into the siding to get the ledger board in?


r/Decks • • 7h ago

Deck was built a year ago. Look like flashing (maybe?) is peeling off. Is this a cosmetic issue or something I need to have fixed before I have a bigger problem?

Post image
1 Upvotes

r/Decks • • 8h ago

Poly on Trex

1 Upvotes

Had my kitchen redone this summer, and the contractor spilled a small amount of oil based poly on one board. Not a huge deal, but it’s in a fairly noticeable area. Any ideas to remove it? Or should I just wait until it breaks down? I’m in Massachusetts, so maybe it’ll be gone by spring.


r/Decks • • 9h ago

questions for the community Grooves on Underside of Deck Stairs?

Post image
1 Upvotes

I live in a 3 story condo building and in the process of repairing some stairs I realized the existing stairs have these 2 grooves cut into the bottom surface, probably like 1/8" or 1/4" in depth. Any reason to do the same thing on the new ones?


r/Decks • • 10h ago

Finished Decks My summer long deck rebuild

Thumbnail
gallery
257 Upvotes

I don’t build decks; My main objective was to make it a little wider so that I could store my riding lawn mower underneath it. It fits now perfectly! The overhaul turned into so much more… I’m pretty happy with it even though it took me a lot of weekends and hours after work to complete it.

I’m most proud of the hidden pocket door that slides open for access to my storage underneath. I’m also happy with how the picture framing turned out, and glad I went with Azek decking.

The railing took me a long time to complete. I wish I would’ve just went with aluminum over stainless steel because it’s not so easy to cut and drill through! Cables were time consuming and my fingers were raw. As they say though it was still worth it and I love all the visibility without the maintenance of glass🤘

I will be adding furniture, a grill, and hanging a tv under the sofit to truly wrap up this whole project. It will be great to finally enjoy it next summer!


r/Decks • • 10h ago

Header questions

Thumbnail
gallery
3 Upvotes

Hey deck masters,
I am about to replace the 34 year old, sun beaten deck at my house. There is a lot that isn’t to code with this deck, but the header in particular looks sketchy….double header? I have no idea what’s going on here…can anyone shed some knowledge.


r/Decks • • 13h ago

Fitting columns to stone bases.

256 Upvotes

r/Decks • • 1d ago

Deck addition utilizing existing deck

Thumbnail
gallery
1 Upvotes

Any structural engineers or other deck pros that could advise on the structural soundness of this deck addition?

We are adding a roof to the second half of our deck and extending it out further 18 x 14. So the trex portion retained to the left of photo will not have a roof. The contractor mentioned we could reuse some of what we have since the existing deck is only 5 years old.

I did reach out to another local company and they are not sure why this portion of deck wasn’t just started from scratch as peacing it together and reinforcing where needed is not what they would ever do.

I feel my main concern is how the side with new beams has long beams running to the posts at the end but the ones added to the existing deck are just a foot long. Not my expertise but will show photos. Also the quote is $42k.


r/Decks • • 1d ago

Rate my deck

Post image
12 Upvotes

Deck under deck situation. Used 2x4 joists, used tuff blocks to support. Rocks underneath for drainage.


r/Decks • • 1d ago

The screws just keep spinning

0 Upvotes

We are replacing the deck boards and some deck screws just keep spinning. I tried some toothpicks in the hole but it won't work at all. The top of the joist did show some cracks/splitting by the old nails. I tried using a 3" screws instead of the 2 1/2", still won't work.

What else can I try?

Thanks


r/Decks • • 1d ago

How to avoid prolonged stickiness with Messmer's oil based paint.

1 Upvotes

So I used Messmers oil based paint on my redwood a couple years ago. It was stixky for a looong time, collecting dust etc. wondering if I did something wrong or if its an issue with this brand. I'm overdue to repaint and have some left. For comor match etc itd be easiest to reuse the same product but I definitely dont want that issue again! Any suggestions welcome- perhaps I put it on too thick but I feel like I applied it the same way Ive used other products (tho I def could have thinned it out a bit.)


r/Decks • • 1d ago

StoneDeks or Mbrico??

1 Upvotes

Replacing the deck on the house we bought. We prefer not to use wood or composite. Any experience with these or another alternative??


r/Decks • • 1d ago

Name for joist cover that extends beyond decking?

2 Upvotes

What is the name for a protective metal cover for a joist or soffit or beam? I'm not looking for joist tape. I have a deck that has joists that extend beyond the floor decking. They are exposed to rain and the elements. I want to protect the top of them. I've seen metal covers that go over them but I don't know what to Google. When I search for joist caps all I see are post caps or joist tape or braces.


r/Decks • • 1d ago

Can a decking company act as a coordinating general contractor?

0 Upvotes

I need to replace a rotting deck that has a broken hot tub slightly built in. As I understand it,
- an electrician has to disconnect the hot tub and cap the dedicated conduit
- a separate company has to remove the hot tub
- then, the decking company has to remove the old deck & build a new one.

Can or will a decking company act as a kind of general contractor for each of these steps? Because the idea of making all the calls, getting quotes, choosing companies, and scheduling all the work in the right order myself is overwhelming & exhausting. Will it be hugely more expensive to a a decking company coordinate all the work? Thanks for any guidance.


r/Decks • • 1d ago

Replace or restore? If restoring, where do I start? New home owner things all new to me

Thumbnail
gallery
7 Upvotes

r/Decks • • 1d ago

questions for the community Elevated home. Are the stringers attached correctly? Any other comments on the work so far?

Thumbnail
gallery
15 Upvotes

r/Decks • • 1d ago

questions for the community KDAT Deckboards

1 Upvotes

I’ve heard both ends of the spectrum.

Gap vs no gap. As Fall has set in, contractor finished the decking in one day while we were at work using KDAT boards has butted together. As expected everything is super tight with some areas holding water.

They assure me it will shrink some and leave a gap but I doubt it. They say they’re going to pull some boards and rip them. And it will probably not look great.

It’s still a vast improvement over the old deck.

Live and learn.


r/Decks • • 1d ago

Extending Deck 3ft

Thumbnail
gallery
2 Upvotes

Can I extend this a few feet?

2x10 12' joists.

6x6 posts.

How far of a total overhang can i have?

Can I sister 2×10 joists to the existing ones for the extension?


r/Decks • • 1d ago

questions for the community Does this look alright?

Thumbnail
gallery
60 Upvotes

Curious if the joist hangers and posts look okay. The posts in particular seem pretty off center on the footing. Not a ton of load, just single story back stairs with a landing. If this is an issue, what can be done/what should I ask the contractor to do?

EDIT: Thank you for all of the very helpful insights! I will get back to our contractor and update y’all on the outcomes.


r/Decks • • 1d ago

Timbertech

0 Upvotes

Those that chose timbertech which “trim” did you choose? Which is the most “bang for your buck”? I have a budget of 30k probably.