I recently bought this Mamiya, along with some extra accessories I ordered from Japan. While running some initial tests to check how it works, I ran into an issue—and I can’t figure out where the fault lies. I decided to try out a 6x4.5 film back that I had purchased separately. When I inspected it, I noticed that the light seals—which prevent light leaks—weren’t in great condition; they seemed almost crystallized (likely due to long-term disuse, as the back itself looks brand new). Even so, I decided to use it. I should also mention that, since I didn’t have a light meter, I used my digital camera to gauge the exposure, as I was combining an external flash with natural light.
I generally overexpose by one stop, especially with the film I’m using. Here’s the problem: as you can see, the first 10 frames on the roll turned out fine—though it feels like they gradually lose some light from the first to the tenth frame. I’m not sure if I made an exposure error, but the last 5 frames didn’t turn out at all—there’s absolutely no image information on them. I develop and scan my own film, so I’ve made mistakes before—like trying to stretch my Kodak D76 developer to cover an extra roll or two—but in this case, I hadn’t even reached the limit (I had only developed 7 rolls with it). Even so, I don’t believe that’s the reason for the complete lack of exposure, since there was more sunlight at the second location where I shot those 5 frames. If you look at the images, the settings used were very similar. I’ve considered that I might have accidentally shifted the shutter speed or aperture while shooting, but even then, it doesn’t make sense that—even if I had underexposed by 1 to 3 stops—there would be absolutely no information recorded on that part of the negative. Here are the possibilities I’ve come up with:
Something wrong with the film back
Exhausted (depleted) chemistry
Exposure error
What do you think it could be?