r/DSP • u/Greedy-Cucumber9200 • 21h ago
ACM Multimedia 2026: TimeCues Studio - a free, open-source tool for annotating music structure [R]
r/DSP • u/phunkshunz • 1d ago
I made two free techno plugins (BETONG + GLAPP) – VST3/AU, Mac/Win/Linux
Hi! I'm a techno producer from Stockholm. I've been building my own plugins under the name MASKINHALLEN ("the machine hall"). They're made in Claude and inspired by Docklands, a rattling old boatyard that was Stockholm's best techno club in the 90s. Two of them are completely free. No email, no account, no catch:
BETONG – loop sampler Drop in a loop and BETONG chops it into skewed, drunk, polyrhythmic techno. 8 tracks, 16 pads, dice buttons for quick variations, and MIDI out so you can drive other instruments with its patterns.
GLAPP – MIDI groove generator A MIDI groove tool for micro-timing and drag. It pushes and pulls your notes so stiff patterns start to swing and roll, like a drummer who's slightly behind the beat on purpose.
Both run as VST3 and AU on Mac, Windows and Linux. The interface has an SV/EN toggle, so you can switch the Swedish labels to English. The other machines There are 13 more machines in the series, all with free demos you can try first. A few examples:
- KOLV – press play and it builds a whole techno track by itself, lane by lane
- FRÄS – a filter that cuts your beat with rotating geometric shapes
- KULVERT – a dark tunnel reverb, like your loop in a concrete basement
- SMUTS – feed it four loops and it chops and rebuilds them into dirty techno
- VENTIL – a groove effect that makes loops breathe and swing
Downloads and demos: phunkshunz.github.io/maskinhallen
Videos: phunkshunz.github.io/maskinhallen/videos.html
I'd really appreciate feedback, especially on BETONG and GLAPP. Tell me what's missing, what's confusing, or what you'd want next. Thanks for reading!
r/DSP • u/Lolmaster29934 • 1d ago
New guy here, Should i pull the trigger on a DSP and a new Head unit?
reddit.comr/DSP • u/noa_125422 • 2d ago
Need help with a DSP project
Hi, I’m taking a DSP course and I have to do a project worth 15 points. I’ve been searching for ideas and I found this one (Speeding up audio recordings without changing the pitch of the voice). I’m not sure if it’s easy or difficult because I’m really struggling to understand the course. so if you have any advice or resources to help me get started, or even other project ideas. I’d be happy to hear them.
Thank you!
r/DSP • u/flexitnoketchup • 3d ago
How will AI affect the industry?
I got my undergraduate in EE with a specialization in signal processing in 2024 and have been working outside of engineering for the past two years. I was thinking of returning to signal processing and going to graduate school, but I was wondering if it would be worth it given how much work AI is automating
r/DSP • u/QueueSevenM • 3d ago
Combining Wide-Band Voice Pulse Modeling and Linear Predictive Coding
queuesevenm.wordpress.comr/DSP • u/logic_circuit • 3d ago
Wavlet verification
Are there open source tools which can help verify wavlet arifacts? Analysis is done using wavelib.
Now we must prove by external tool that it works as expected. There are internal checks and verifications all passing; we create signal of various complexities and it works.
Ideas were matlab, scilab, octave but we also have to implement checks.
Customer wants very simple test:
- signal mathematically generated over number of channels - our library must match verification tool within threshold.
Expect some tool with user base so they are sure dumb problems are cleaned up.
So, is there tool which we can utilize to perform the same with minimim user configurable options?
There is good catch, we chose two from wavelib and verify. Other even with small discrepancies will be fixed in support process.
r/DSP • u/Altruistic-Sell-1586 • 3d ago
Further education for DSP?
I have a BS in Applied Math and MS in Statistics and am interested in the field of digital signal processing. Would it be worth it to pursue further engineering qualifications (either a certificate, BS, MS) since I don't have a specific engineering degree? I have the math qualifications down (calculus, linear algebra, complex analysis, diff eqs), but would it be hard to break in/be trusted without specifically anything labeled "engineering"? I know going back to school is not always a popular choice (especially on Reddit), but I will consider if it's something that makes sense and/or gives me more future proof skills against automation/AI. Otherwise, should I just try to get a tangentially related computational role and find a way to get in from there? Thanks in advance.
r/DSP • u/QueueSevenM • 3d ago
Hybrid approach for modeling residual components in audio signals
queuesevenm.wordpress.comr/DSP • u/InternationalRush871 • 3d ago
I implemented the core of JPEG in MATLAB (8×8 DCT + quantization) and built a browser lab to play with Q
Individual academic project. Grayscale image, split in 8×8 blocks, DCT per block, divide by a quantization matrix Q and round. Most high-frequency coefficients become zero, and that is where the compression comes from.
Results I measured: with the standard Q, I kept about 41 dB PSNR with about 40% less storage (estimated). Scaling Q from Q/2 to 2Q cut the estimated size by up to 72% while staying above 30 dB PSNR. Note that the size is an estimate based on run-length + Huffman, not a real JPEG file.
The lab re-implements the algorithm in the browser: you can compress your own image, inspect the 64 cosine patterns and see MSE / PSNR change as you move Q.
https://portfolio-iota-gules-ykw61kciwc.vercel.app/projects/jpeg.html
Feedback welcome, especially on how I'm estimating the entropy-coding step.
r/DSP • u/CodeManned • 3d ago
I made a free web tool for Electrical Network Frequency (ENF) audio forensics analysis
I don't know if this is even related to this subreddit but I made a cool free tool everybody can use. Whenever you record audio near electrical wiring or plugged-in devices, microphones subtly pick up the 50Hz or 60Hz hum of the local power grid. Because the grid's frequency fluctuates slightly every second, that hum acts like an invisible timestamp and location fingerprint (known as Electrical Network Frequency, or ENF analysis). so typically 50 Hz in Europe/Asia or 60 Hz in North America. here is the web if anyone is interested: https://gridhum-eight.vercel.app
r/DSP • u/Plenty_Performer7785 • 3d ago
Advice for Salary Negotiation around a new signal processing role
Hiya, not totally sure if this is the right place for this question, so please let me know if I should repost elsewhere.
I am currently working as a junior electronic design engineer, which I went it to as a fresh graduate. My main responsibilities on paper are schematic capture, PCB layouts and testing and I’ve been in it for roughly a year. In this time I’ve volunteered myself for a bunch of both analog and digital signal processing jobs, all of which have been very successful, and management have been very pleased with. For context I’m at an audio tech company, so this has been things like writing and implementing custom reverb, compression etc. algorithms on micros, and also designing different analog circuits for tonal processing (basically just discrete amplifiers that operate just outside of the linear range and have a bunch of filtering baked in). Tests for proving system stability (L1/L2 norm and pole locations etc.) have also been a part of this, along with teaching the other engineers how to do this as it’s a big knowledge gap in the company.
because of this, I’ve been told that they wanna move me into a role that focuses much more heavily on analog and digital signal processing, where I would be the owner of all A/DSP features, and be solely responsible for the design of the algorithms and circuits. Obviously this is a pretty big jump in responsibilities, and will come with a pay rise. However, I do not have any good idea of what to ask for as I can’t find any examples of this online. I’m currently on 32K, and if it helps I’m based in the UK, and only have an undergrad in music tech, so my qualifications don’t really demand a high salary.
Thanks in advance!
r/DSP • u/design_enthusiast725 • 4d ago
How do I handle the click the right way?
If I play a sine wave, I hear a click at the beginning and at the end of the sound.
It seems like the click comes from the sharp start and the end.
I found a fix by resizing the amplitude by sigmoid from 0 amp to the first max value (when sine function hits 1 or -1 for the first time)
Is it a "correct" way of doing that?
I want to be as short as possible, but the first max amp value seems to be the right choice.
I don't know any theory, it just feels right.
I also have a similar problem at the end.
If the wave and at 0 value, I can do the same solution, but what if the value is not 0?
I can trim to the nearest 0 and and do the solution, but it feels like a
crutch and that there is a "right" solution for that.
PS If this is not the right kinda place to ask this type of questions, where should I go?
r/DSP • u/AlbbO_The_Great • 4d ago
How to remove honeycomb pattern present in fiber bundles for imaging in FPGAs?
I'm doing a project on endomicroscopes + FPGA and I have a processing core already, but the problem is I built the core with clean images (i.e. postprocessed, this wasn't made by me). Now when I connected the camera + endo system the homeycomb pattern shows up. Are there any standard ways to remove these patterns? Are there any IP that removes these patterns that I don't know? Is there like a mathematical way of doing this that im not smart enough to see?
The preprocessing method already built uses an iterative interpolation process, and if I were to put that into the FPGA's PL side it's going to be too big.
r/DSP • u/Superalpaca1234 • 5d ago
Commercial Cellular or Defense?
I currently work at a national lab as a wireless comms engineering, with a heavy focus on 5G/6G. I enjoy the work, but I’d like to go to a commercial cellular company at some point (e.g., Apple, Qualcomm, etc). However, nothing is guaranteed of course. I’m also not sure about long term prospects in the US, as a lot of commercial RF work can be outsourced to Asia.
I have an offer for a Radar engineering role at a defense startup, but I fear I may be locked out of commercial cellular if I take the role because of how defense focused it is. Radar sounds interesting, and I’m not worried about going back and forth between radar and comms within the defense industry. But transitioning from defense radar to commercial cellular may be tough.
Anybody have any experience in commercial cellular? Is it worth holding out for? Is it worth staying in defense and taking the current offer on the table?
Thanks!
Edit: I wouldn’t mind transitioning to commercial radar as well. Largely just want to transition out of the defense space at some point.
r/DSP • u/borish127 • 6d ago
[Project] PyFDA Web – An in-browser digital filter design tool powered by Pyodide and WebAssembly (scipy.signal & numpy)
Hi everyone,
I wanted to share an open-source project I've been working on: PyFDA Web.
It is inspired in the original PyFDA desktop application by Christian Münker, but made to work completely on the browser without any installation.
Source & Live Demo: https://github.com/borish127/PyFDA-Web
The project is under the GPLv3 license.
Feedback, suggestions, or bug reports are very welcome!
Thanks!!
r/DSP • u/JanWilczek • 7d ago
Podcast interview with Professor Julius O. Smith III of CCRMA (Stanford)
Episode contents:
How Julius Smith became one of the world’s most well-known and respected DSP professors
The story of CCRMA at Stanford University
Behind the scenes of the music features of the NeXT computer
The story of Yamaha synthesizer development (FM and physical modeling)
The story of Shazam and GeoShred music apps
How to learn DSP well
How to do excellent DSP research
How Julius uses AI for research, learning & programming
It's been my career-long dream to interview him, and it's come true!
r/DSP • u/fletchmm • 6d ago
I built ChirpMap: A terminal-native acoustic echolocation tool that maps rooms movement, changes, and blueprint, written in Rust.
I’ve been working on ChirpMap, an experimental Rust application that uses speakers and microphones for acoustic ranging, scene-change detection, and room visualization.
The basic idea is simple: play a short frequency sweep, record the response, and use the returning echoes to estimate what’s in the room. The more interesting part is combining measurements from multiple speaker/microphone pairs into a two-dimensional heat map.
Repo: https://github.com/FletchEm31/ChirpMap
What it does
Chirp-based ranging: generates a short sweep and uses FFT-based matched filtering to extract echo timing from microphone recordings.
Background subtraction: captures a baseline scene, then highlights changes in the echo profile rather than displaying every persistent reflection.
Multi-speaker/microphone tracking: combines measurements across device pairs using elliptical back-projection to place echo energy on a 2D room layout.
Device calibration: measures ambient noise, usable frequency band, signal levels, speaker ring-down, and capture-timing variation.
Terminal interface: provides device selection, calibration, room-layout configuration, and live visualizations.
Hardware-free simulation: includes a simulated room and moving target so you can try the processing pipeline without setting up audio hardware.
The sensing and processing run locally. It’s written in Rust, with AI-assisted development.
What the visualization means
The heat map shows where the measured echo paths agree with positions on the room layout. It isn’t camera vision, and a bright region isn’t automatically a correctly identified person or object.
This is still experimental. Results depend heavily on speaker and microphone quality, device placement, room acoustics, and reflections. A single speaker/microphone pair primarily provides range information; multiple pairs add geometric constraints. Simulated localization results shouldn’t be read as a guarantee of physical-room accuracy.
What I’m working on next
I’m focusing on better measurement confidence, handling ambiguous direct arrivals and reflections, and testing across more hardware and room configurations.
I’d particularly appreciate feedback from people working with Rust audio, DSP, or acoustic localization:
What would you test first to distinguish genuine localization from reflection artifacts?
Are there better approaches to timing alignment across separate audio devices?
Which hardware combinations would make useful compatibility tests?
The GIF below shows the array-tracker view. I’d love feedback on both the implementation and the underlying approach.

r/DSP • u/Nobody11001 • 7d ago
DVB-RCS2 TCLM Example in Matlab R2026a
Hi Everyone,
I'm working with the official MathWorks DVB-RCS2 link simulation example in MATLAB R2026b, specifically the TC-LM (Turbo Coding with Linear Modulation) transmission format.
Official example: https://www.mathworks.com/help/satcom/ug/end-to-end-dvb-rcs2-simulation-with-rf-impairments-and-corrections-for-tc-lm-bursts.html
While testing different waveform IDs, I've observed the following issues:
Some waveforms are not passing at all
Certain waveform IDs consistently fail to achieve successful decoding, even when using the default simulation configuration.
2. Index-out-of-bounds errors at low E/N
For some waveform IDs, the simulation throws an index-out-of-bounds error at lower E/N values and terminates instead of completing the PER evaluation.
3. Significant gap between specification and simulated thresholds
There is a noticeable gap between the E/N thresholds specified in the DVB-RCS2 specification and the thresholds achieved by the MATLAB example.
I'd like to understand whether this is an expected result of the example or whether there could be an issue with the waveform-specific receiver processing, synchronization, or implementation.
4. Satellite channel modelling
The example includes AWGN and selected RF impairments, but I haven't found a complete satellite propagation channel model integrated into the simulation.
I'd like to understand the recommended approach for incorporating realistic satellite channel effects, such as Doppler, propagation delay, and other relevant impairments.
Questions:
Has anyone tested the different supported TC-LM waveform IDs using this official example? Are there any known issues with particular waveform IDs?
Are the index-out-of-bounds errors at low E/N known issues, particularly when burst detection or synchronization fails?
Has anyone validated the PER-versus-E/N performance of this example against the DVB-RCS2 specification? Is a significant threshold gap expected?
Are there any recommended corrections or configurations to achieve performance closer to the specified thresholds?
Is there a recommended satellite channel model or approach for extending this example beyond AWGN and the included RF impairments?
I'd appreciate feedback from anyone who has worked on DVB-RCS2 TC-LM, satellite link-level simulations, or the MathWorks Satellite Communications Toolbox.
Thanks in advance!
r/DSP • u/Tumblecow • 9d ago
I made a small open-source tool that dates audio recordings from their mains hum (ENF)
I made a small open-source tool that estimates when an audio recording was made from the mains hum in it (electric network frequency analysis): https://github.com/tijszwinkels/enf-timestamp
Video with the full story: https://youtu.be/bi7EwMiDQTQ
How it works: band-pass around a hum harmonic, track the peak once per second (16 s Hann window, zero-padded FFT, quadratic interpolation), then a sliding Pearson correlation against a 1-second grid-frequency log, done with FFT convolution so days of reference data take seconds. It includes a logger for Continental-European grid data (Gridradar's free API) and a strict confidence verdict.
This has been written with a coding agent.
What I found: 10 minutes of laptop audio, matched against 36 h of grid data, landed 6 s from the true start (100 Hz line, z ≈ 5). A phone on its charger (50 Hz electrical pickup) got the right minute, with a weak margin. Phones on battery and a quiet room gave nothing usable.