r/DJSetups • • 1d ago

Putting a laptop under the controller is a sick idea, IMO.

Post image
25 Upvotes

r/DJSetups • • 1d ago

Me 47m (left) and my son 16m (right) setups

Post image
287 Upvotes

r/DJSetups • • 1d ago

Our setup

Thumbnail
gallery
97 Upvotes

r/DJSetups • • 2d ago

We are groovin

Post image
62 Upvotes

Xone 96, pair of XDj 1000MK2s and a U turn orbit.
Then have the production table.
Blessed and super proud of my set up.
Still need to clean it up but this is what I’m working with.


r/DJSetups • • 2d ago Bravo

Custom built DJ booth

Thumbnail
gallery
188 Upvotes

Finally finished my custom-built DJ booth and thought I’d share the result!
I designed and built the entire enclosure myself to fit my setup. It houses two turntables, an Allen & Heath Xone:96 and a Native Instruments X1 MK3, with everything integrated into one clean setup.

What’s even more special about this project is that it was my first bigger woodworking project. I had some smaller DIY experience before, but nothing quite like this. I’m pretty happy with how it turned out!
A few details about the build:

Custom wooden enclosure: Built entirely from scratch, with a black finish.

Height-adjustable desk: The whole booth sits on an electrically height-adjustable desk frame, so I can adjust the working height whenever I need to. It also has a built-in charging connection for my MacBook.

Single power connection: There’s a power strip installed inside the booth where all the equipment is plugged in. This means there’s only one single power cable coming out of the entire setup.

Cable management: There’s a dedicated compartment underneath the mixer with plenty of room for cables and connections.

Magnetic access panel: The wooden panel for the air intake is attached magnetically, so I can easily remove it whenever I need access to the cables.

Cooling: Integrated fans to provide airflow inside the enclosure.

Scratch protection: Added foam pads at the contact points to protect the equipment and the wooden surfaces from scratches.

DIY Decksaver: I also made a removable cover to protect the equipment from dust when it’s not in use.
The cover might make the whole thing look a little like a coffin when it’s on top, but it cost me less than €20 to make, which is considerably cheaper than buying individual plastic Decksavers for everything.

The setup:
2x Reloop RP-7000 MK2
Allen & Heath Xone:96
Native Instruments X1 MK3

Overall, I’m really happy with how it turned out. It took quite a bit of planning and building, especially for my first bigger woodworking project, but having everything integrated into one custom booth was definitely worth it.

What do you guys think?


r/DJSetups • • 3d ago

One of my mobile setups

Post image
16 Upvotes

RCF EVOX J8 speakers

Both Lighting BPM Splash-X (battery powered moving head, wireless DMX)

Betopper L1015 (on the floor)

Rockville Haze

2 Shehds Constellation 6w lasers

Not in picture, XDJ-XZ

I have another setup with 2 totems and I put Both Lighting IR4 par led's inside the totems to light them up.


r/DJSetups • • 4d ago

Dual Traktor MX2 controllers running into an analog Xone:23 for our hybrid B2B setup.

Post image
24 Upvotes

Built this routing to run two independent Traktor MX2 instances into the analog filters of the Xone:23. No sync cable between laptops, just manual beatmatching on the fly.

How are you guys handling dual-laptop B2B routing nowadays?


r/DJSetups • • 4d ago

Inside the man cave!

Thumbnail
gallery
72 Upvotes

Thought I'd join the party!


r/DJSetups • • 4d ago

Jumping back in.

Post image
47 Upvotes

After more than two decades of not having a rig I jumped back in a big way.


r/DJSetups • • 5d ago

It’s not that fancy,but it’s mine

Thumbnail
gallery
66 Upvotes

Here’s my average setup at home.
I don’t Dj anywhere else so this does me wonders.

IKEA shelves with one layer dividers removed.

DDJ 1000. MIni Mac. 24” screen.
Rokit 8”
Polk Audio sub.

Plants too.


r/DJSetups • • 5d ago

Nothing fancy but gets the grooves playing

Post image
165 Upvotes

$100 at home depot and got a table to hold my beer


r/DJSetups • • 6d ago

Basement Setup

Post image
116 Upvotes

- Technics M3

- Technics M3D

- Reloop RP-7000 Mk2

- Pioneer CDJ 900

- Vestax PCV-275

Shelves are made using stair treads from Home Despot.


r/DJSetups • • 6d ago

Wood

Thumbnail
gallery
30 Upvotes

r/DJSetups • • 8d ago

Un poco de Rx3.

Post image
45 Upvotes

r/DJSetups • • 9d ago

Retro Futuristic Conversation Pit

Thumbnail gallery
48 Upvotes

r/DJSetups • • 9d ago Bravo

Life finds a way

Post image
357 Upvotes

Broke 18 year old. I love DJing. I bought this $20DJ mixer, two $10 cd players, and all the cds I used were my dad’s old collection. I’ll link to the set once I get it on YouTube.

Edit - here is the set https://youtu.be/p-G_VnNAmMQ?is=35SG_hv8gGyHQ50H

I really tried here, it’s not great but I have to start somewhere


r/DJSetups • • 9d ago

Where I learned mixing records

Post image
43 Upvotes

I had the keys from this place and would regularly spend the weekdays putting on some lights and practicing.


r/DJSetups • • 10d ago

Home studio.

Thumbnail
gallery
64 Upvotes

after a month of searching markets and looking for gear, I finally managed to finish my home studio. One more thing left which arrives next week: Adam Audio T7V speakers and we’ll be ready to take-off :)


r/DJSetups • • 10d ago

Got my first twin CD player

Thumbnail
gallery
83 Upvotes

Numark CDN-32S was the first DJ CD player I learned to spin on but I decided to go deeper by purchasing this Denon DN-2000Fmk3.

It's absolutely amazing!

It was made in Japan in 1999 but it's barely used, I feel. VFDs are bright and shiny and their glasses have just a few small scratches. Transports read discs very fast but the loading trays require belts replacement because they move pretty slow. Also, there are signs of rough installation to the 19-inch rack on the main unit.

I was spinning on this Denon for ~1.5 hours without any tests prior and there were no issues. Now I'm on the way to integrate it in my setup permanently.


r/DJSetups • • 11d ago

Ikea DJ Booth

Thumbnail
gallery
666 Upvotes

I wanted to share my setup for anyone who may be interested in having a flush dj booth. I got inspiration from Classics on Wax on Instagram, I reached out to him and he explained what he did for his setup and has recently posted a reel of how he created his setup for anyone interested. It’s essentially 2 identical ikea table tops separated by a timber frame in between. I cut out the top table top to fit the turntables and mixer and that then sits on the timber frame. I used a jigsaw to cut the holes and used some trim to cover all the edges to make it look tidy. The dj mixer doesn’t run hot thankfully but I left the back of the timber frame open to allow for some air flow if needed. Some sections are rough around the edges but for now, it suits my needs.

I use this setup primarily for DVS with Traktor so I have a X1 Mk3 for DVS control tucked away out of sight at the side as I didn’t want to ruin the symmetry of the mixer with 2 turntables either side. As the table top is pretty cheap, if I ever was to change setups, I could just swap out the top one and repeat the process. All cables are hidden within the frame as well as the kallax unit itself so that it looks a bit tidier.

I use this setup to also listen to CDs along with streaming music. I have a cd player and streamer tucked away behind one of the doors. I also use the drawers to store all my CDs. I don’t like jewel cases so I use plastic inserts instead so I can fill the 4 drawers with hundreds of CD using a lot less space.

This is a very budget friendly setup containing mainly ikea parts as follows:

- Main frame – Ikea Kallax Unit

- Underframe – Kallax Frame

- Table Top (Top and Bottom) – Lagkapten top

- Timber Frame – cheap timber sourced from a local B&Q

DJ Setup:

- 2 x Reloop 7000 Mk2 Turntables

- Omnitronic TRM 402 Rotary Mixer

- Traktor Audio 10 for Traktor DVS

- Traktor Kontrol X1 Mk3

- 12.3 inch portable monitor

- Gaming PC running Traktor Pro 4 located on the other side of the room

- Madison CD Player

- Wiim Pro Plus for streaming music

Happy to answer any questions on this. Again credit goes to Classic On Wax for the inspiration. Check out his setup here

https://www.instagram.com/classics_on_wax


r/DJSetups • • 11d ago

Beginning of Hybrid

Thumbnail
gallery
55 Upvotes

Been wanting to get into hybrid DJing for a while, just recently got this RD-9 in the mail and hooked it up to my DDJ-1000 via Ch. 4. Currently running RB but been told VDJ with their midi out would be a better choice but ive been fine manually beatmatching my drums and music but time will tell how I REALLY feel.

Hopefully soon ill add an Akai MPC One (the Retro edition specifically) and a Behringer TD-3-MO, that will cover me instrument wise! If anyone has any recommendations for compressors or QoL additions please lmk, I look forward to expanding this setup!


r/DJSetups • • 11d ago

New Lisbon Setup

Thumbnail
gallery
67 Upvotes

Finished my new setup today after moving to Lisbon two weeks ago.
Upgraded myself over the years from a few smaller controllers from NI to the XDJ-XZ. I feel it’s one of the cheapest options to get a club standard design. Can’t afford a CDJ setup atm but maybe I’ll add one extra deck and a turntable eventually.


r/DJSetups • • 11d ago

Re-fit

Thumbnail
gallery
268 Upvotes

After a fair bit of trial and error, finally managed to suss out pull-out record drawers...a few trips to B&Q and heavy-duty runners later 😆

Focal Alpha 65 speakers added to the Euphonia and we locked in and ready for winter 🔊

(Last pic is old set up)


r/DJSetups • • 12d ago

Best of both worlds. digital on top, vinyl below.

Post image
187 Upvotes