r/CustomROMsGuide • • Sep 24 '26

Help

Bootloader locked. Stuck in bootloop what do I do now. Tried flashing fastboot rom didn't work. Redmi K20 pro

82 Upvotes

43 comments sorted by

11

u/DEV_ivan Sep 24 '26

You need 4 of these:

  • Qualcomm EDL flashing tool

  • Latest fastboot ROM

  • SM8150 Firehose loader

  • Official Auth or Auth Bypass

Relevant sources:

When in doubt, consider sending the phone to the official Xiaomi service center. Good luck.

3

u/piyusshhhhh Sep 24 '26

Service centre told to change motherboard

4

u/DanLP6yt Sep 24 '26

No... There is so much easier way... If in doubt ask on xda but here is a basic procedure which should work with a locked bootloader (I hope you can get into fastboot else proceed with the above or what XDA said)

  • Get Factory Image (same as current or newer)

  • Flash

  • Wipe Data

  • Done (should boot)

3

u/piyusshhhhh Sep 25 '26

Says can't flash in locked statešŸ™ƒ

0

u/DanLP6yt Sep 27 '26

I guess you could still try an EDL Flash... (Did you post on XDA? Did anyone answer?)

2

u/DEV_ivan Sep 24 '26

Yea that's a common saying within most official service centers, including Carlcare for my TECNO.

It's almost certain they will flash the ROM instead, because replacing the motherboard is expensive for them anyway.

2

u/DroidService Sep 25 '26 edited Sep 27 '26

You have to open the back and prepare some tweezers.

You'll need the Firehose Loader file and the Fastboot Rom. If you got both you can use qfil to flash.

āŒSince the Firehose File and Auth bypass is behind a paywallāŒ, I can also help unbricking the phone.

Edit: Found a Public free Firehose File for this model

1

u/piyusshhhhh Sep 25 '26

I just want the phone to work. Can u guide me

2

u/DroidService Sep 25 '26

0. Install Qd-loader 9008 drivers

  1. Get the Phone into EDL Mode by removing the back and tapping 2 Mainboard Points with a tweezer (with battery connector removed) and plugging in the Cable. I'll send the Testpoints location and Firehose File later.

  2. Launch Qfil as Admin, and make sure the device gets detected (Qualcomm HS-USB QDLoader 9008). Use the Select Port option if not.

  3. Build type: Flat build

  4. Configuration āž” FireHose Configuration, change device type to UFS

  5. On the main screen click "Browse" then select the Firehose File.

  6. Click load XML and choose the rawprogram0.xml from the extracted fastboot Rom

  7. Then the second window will pop up where you select the patch files (patch0.xml, patch1.xml etc.) select All available. (Inside fastboot Rom)

  8. Click "Download" to flash

2

u/DroidService Sep 25 '26

Drivers (Need to extract with 7zip, install in device manager) : https://catalog.update.microsoft.com/Search.aspx?q=Qualcomm

Name: Qualcomm Incorporated Ports

3

u/A2000HP Sep 24 '26 edited Sep 24 '26

Redmi k20 pro aka raphael, such a goated device. I use a Redwood and once locked my bootloader with EvolutionX flashed, got the same red triangle and error screen. So what i did was used mi unlock tool to unlock the bootloader first, then flash all the files (vendor, boot and actual rom file etc.) and a clean flash made it back to working.

As per your error screen (second image), your bootloader is locked and u are unable to unlock again. Apparently you never added your xiaomi account in your phone did you? Try using a different version of mi unlock tool

0

u/piyusshhhhh Sep 24 '26

Phone was reseted so no account was added

4

u/A2000HP Sep 24 '26

here's my scenario, i had a device with everything going good on evolutionx, and then i locked the bootloader, but even after getting error "system has been destroyed" I was able to unlock it using mi unlock tool. As far as i remember, locking the bootloader also reset the device.
That's all i can help wish you luck on your way.

2

u/Darkorder81 Sep 24 '26

Listen to this guy it might solve your problem.

2

u/DanLP6yt Sep 24 '26

You can always flash stock

8

u/Possible-Salary-9031 Sep 25 '26

only God and some future deleted reddit accounts can help you

4

u/Dakrred Sep 25 '26

Custom rom final boss defeat vibes

1

u/Being_idiot Sep 24 '26

Just flash the stock factory image, you can recover the device. No need of changing mother board

1

u/piyusshhhhh Sep 24 '26

Says not allowed in locked state

2

u/Being_idiot Sep 24 '26

I think you can flash offical stock rom even when boot loader is locked. Go to the fastboot using button combination and then download offical fastboot rom and flash it

1

u/DanLP6yt Sep 24 '26

Worked on my Mi Pad5

1

u/anjanidon Sep 24 '26

Does someone have xperia 5iii? Non japanese and rooted

1

u/4k_anbir Sep 26 '26

If bootloader status says yes it's easy and possible

1

u/kp_penguinlogic94 Sep 24 '26

This is my worst fear when flashing a rom to a xiaomi phone. Did you follow a tutorial?

1

u/SugmaFish Sep 24 '26

Xiaomi.šŸ„€

1

u/Terrible-News-4677 Sep 24 '26

Youre almost fucked. Use adb to unlock the bootloader. If you cant, its a brick without a professional repair.

1

u/PresentThat5757 Sep 24 '26

Wdym by unlocking redmi phone with adb??

1

u/Intrepid-Tadpole-137 Sep 24 '26

AquĆ­ remoto te hago el trabajo, me pagas al quedar.

1

u/steelwarrior202 Sep 25 '26

Not all version of miflashtools works. Latest one, definitely doesn't work. The version that I have "MiFlash20200314" works for my MiA1, MiA3 and Poco M6 plus. You can search for that version in internet. If you can't find, DM me for that version.

1

u/shivam_0o0 Sep 25 '26

Flash rom by edl method

1

u/CWLFan001 Sep 25 '26

I had trouble with the mi unlock tool or at least the newest version. Trying getting mi unlock I think version 18.6 and then just flash the stock image. It worked for me.

1

u/HakerCharles Sep 25 '26

EDL Flashing will help you flash the device again

1

u/Specialist-Bath49 Sep 26 '26

you cooked bro, i had this problem 2 years ago

1

u/Charantripurari000 Sep 27 '26

Have you tried going into stock recovery and clear all data?

Hold power button and volume up button!

1

u/Deep-Possession-8765 Sep 29 '26

Flash using qfil

1

u/Deep-Possession-8765 Sep 29 '26

After shutting down, download your firm ware, use load configurations in qfil then press and hold volume up and down both together and connect the device to usb, driver will be detected (you have to install Qualcomm drivers) and then when the device gets detected click download.(Note the edl mode stays idle for like 10 seconds, you can repeat no worries)

0

u/Zone14ZA Sep 24 '26

I would just order a new main board off AliExpress, thats what i did, best part was no Bloatware

1

u/OctoSplattyy Sep 24 '26

why buy a new mobo when this one can be 100% be reflashed