r/Cura • u/Known_Hippo4702 • Sep 14 '22
Weird issue printing PETG slicing in Cura, any help would be appreciated.
First I have to say I love Cura. With Cura and my Ender 3V2 I have completed (or at least almost) completed) some big projects (see: https://www.instagram.com/p/COliZHTnoww/).
But does that mean I know what I am doing, Nooooo. I decided to blend some lids for cat food cans, and I am having a weird issue. So these are basically disks with a raised edge that snap over the top of an open can. I am using PETG because I love it, though I know it threads a lot more than PLA. On to the problem. If have attached a picture.
So as I print the lid the nozzle seems to always home back to the center X/Y coords on each layer, and I get some threading and a little tower in the middle of the lid. This isn't a deal breaker the tower breaks off easily and 30 sec with a piece of sandpaper or an exacto knife and I can clean it up. It's just bugging me that I have tried a lot of changes in Cura and nothing seems to minimize this.
I am guessing and may be completely wrong but I think that it is retraction settings.
My settings are:
Retraction Distance 10, Retraction speed 50, Retraction Retract speed 50, retraction prime speed 50, retraction extra prime amount 5, retraction min travel 5, max retraction count 100, minimum extrusion distance window 12
Like I said it's not a deal breaker but if my next component is a mission critical piece of Artemus 1, I would like to understand how to fix this issue, like fixing a leaky Hydrogen intake valve on the booster.
Thanks.












