I am excited to say the very least. I have ALWAYS wanted a core xz.. now is my opportunity to get one without having to worry about either sourcing the parts or having the skill to build it! I already have a modded out ender 3 v1 neo, im waiting on a bambu lab a1 mini to just come in the mail. My very next printer will either be a voron 0.2 build or this new ender 3 v3 plus!! I am SO HYPED!
Also, we have received touching reply letters from our users. Each of them is the representative of all users, no matter which reason brings you there with Creality. Find yourself in the video ❤️❤️
Cr: Luke Hatfield, Bill Lewullis, Ian Mitchell & Shunyuan Au
I would love to see a K1 Upgrade to an AC bed. I am aware that proper grounding would be needed, but still...I could see myself going that path some time in the future, if you offer a proper bed with slightly thicker bed to carry that new AC heater.
Having made do with the shiny extruder's shortcomings, it looks like I missed the cheap upgrade deal (which is slightly infuriating). Does anyone know where the kit can be ordered now?
On my Prusa mini kit I just printed it. Set the settings and go. Was my second print and turned out fine. All the gears turned right away and all needles went in no problem.
On the K1 on the other hand its a pain. Iam on my 3rd Mech V2 part and while I got the gears free after some wiggling, the needles all get stuck somewhere on the way when trying to install.
I calibrated the flowrate, pressure advance, input shaper (rooted K1 btw) but still no luck! What can I do to get a better print? Tollerence test went down to 0.2 with some force to get it moving. 0.15 and 0.1 no chance.
Here are the options updated for November & December
-------------------------------------
As a global partner of FC Bayern. Creality invites three of our hard-core fans for each game in Nov & DeC to attend the basketball game live! ( VIP Tickets )
Choose the one you'd like to attend (pls make sure you will be attending and no ticket waste) and comment with the choice you made, your thoughts on the game, your favorite team or player, or why you use 3D printers.
FCBB vs. Partizan Belgrad 15.11.2023 20:30
FCBB vs. MHP RIESEN Ludwigsburg 19.11.2023 15:30
FCBB vs. Virtus Bologna 30.11.2023 20:30
FCBB vs. Armani Mailand 05.12.2023 20:30
FCBB vs. ratiopharm ulm 17.12.2023 17:00
FCBB vs. Efes Istanbul 20.12.2023 20:30
FCBB vs. BG Göttingen 22.12.2023 00:00
FCBB vs. AS Monaco 22.12.2023 20:30
FCBB vs. Valencia Basket 28.12.2023 20:30
FCBB vs. MLP Academics Heidelberg 30.12.2023 20:00
Thank you for your interest in this exciting event!
Notices:
*Games Location: BMW Park Saison 2023/24 München, Bayern, Germany
*Each person has only one chance to get a ticket.
*Winners will be announced 2 days before each game starts and need to contact us to claim ticket one day before the game starts.
*We'll highly appreciate the winners taking photos of the game, and posting them after the game in our group and tagging Creality.
The 2024 3D Printing Industry Awards are coming, and it’s time to spotlight those pushing the boundaries in 3D printing technology. This is where we decide who stands out as an industry leader! 🌍If you've seen Creality 3D revolutionize how we think about 3D printing—from affordable machines to advanced innovations—then we need your help to ensure they get the recognition they deserve!🗳️
How can you help? Step 1: Head over to the nomination page and nominate Creality for the awards. Here: https://form.typeform.com/to/AsUZnmnk?typeform-source=3dprintingindustry.com Step 2: Share why Creality is leading the way in consumer 3D printing technology. Step 3: Rally your network and encourage others to nominate too!
Here is my suggestions: Company of the Year (Personal): CREALITY 3D3D Scanning or Metrology Company: Creality 3D Scanner Software Tool: Creality Print 5 (Creality 3D) Material Company of the Year: CREALITY Filaments Enterprise 3D Printer of the Year (Polymers): Sermoon D3 Pro (Creality 3D) Desktop non-FFF 3D Printer of the Year: Halot Mage S - 14K (Creality 3D) Desktop FFF 3D Printer of the Year: K2 Plus (Creality 3D)
🌟 Why nominate Creality? They've brought high-quality and affordable 3D printers to professionals and hobbyists alike. Their innovations make 3D printing more accessible and impactful in education, healthcare, and other industries. Creality’s commitment to affordable, reliable, and cutting-edge solutions sets us apart.
Together, we can help Creality continue to lead and innovate in the world of 3D printing. Let’s make this happen! 💪 🙌
If the z axis is all the way at the top, they ride down together, no problems. If the Z axis is all the way at, it's home position, the new stepper motor seems to hesitate on the first couple millimeters and then begins rolling properly.. Any idea why this would be? They both stop at the same point when homing. It's not like the new motor tries to home further.
So about 7 months ago, I bought the Creality CR-M4 for some big projects, and it's been one disappointment after another. The first issue occurred just three weeks after I got the printer—it broke down without any apparent reason. The stepper motors blocked and made strange noises whenever they moved. After two months of emailing the company (not Creality, as they never responded) where I bought the printer, I finally received a replacement.
I thought I could finally print peacefully, but the second printer had its own issues (huge z-seams, random uneven layers, and gaps). At first, I thought it was my fault and that my settings were off. After extensive troubleshooting (calibrating E-steps, checking all components were tight, using different dry filament, inspecting extruder gears, adjusting flow and retraction, managing temperature, replacing nozzles, ...), I discovered the problem. The metal piece on the gantry was bent about 75 degrees instead of being square. This caused the leadscrew nut to bend as well, making the entire Z-axis faulty.
Conclusion: the Creality CR-M4 is a €1000 junky printer that is always broken. Just don't buy this printer.
Hi everyone, I’ve purchased an ender 3 v3 Se back in September when it first came out and have been having nothing but issues. Nothing would stick to the bed consistently, requiring me to level the bed manually every time. I’ve seen people online using the same machine and having consistent results. However I couldn’t have that even for the first few prints.
That’s the beginning. I contacted creality support and after a long respond time I finally was sent replacement parts. First the x-axis rail was faulty so they replaced that. Then the cr touch and z offset sensor and they replaced that. None of these worked and mind you I have 2 other printers the K1 and an ender 3 pro that I use all the time that work fine.
This whole time I’ve been emailing back and forth for about 4 months now I’ve asked for a refund or to return the device or something but replacement parts, and creality refuses to do it. I’m so tired of wasting my time the creality reps don’t even consider the time I’ve wasted on this.
Sorry for the long thread, and sorry for being rude, I’m just fed up with this and I am wondering if anyone else shares the same experience.
A Creality branded electric micro tool kit, that has all the tools to fix anything Creality. Adjustable torque would be amazing with a complete guide to torque specs.
Edit: Each individual pin of the main board with its hardware pin name has been updated here! Thanks all for keeping things moving, especially for the DM from u/destinal
In our commitment to transparency and progress, we have decided to open source Creality K1 and Creality Print, our slicing software. These resources are now available on GitHub for you to explore, contribute to, and utilize in your own creative endeavors.
We wholeheartedly embrace the open-source community as the bedrock of progress. In the months ahead, our commitment remains unwavering. We're dedicated to opening up even more sections of these two products. We eagerly invite every voice that propels Creality forward and makes us better. So, what are your expectations? How do you envision the future of Creality and open source? Share your thoughts, and let's shape this journey together.
As you can see, Creality began to explore Reddit and build our subreddit. To better participate in user communication and resource management, we hope to learn the secret from you to help us grow and move forward.
As Senior 3D printing Redditors, you guys have more experiences, please share with us your ideas on
what content do you want to see in our subreddit?
what do you think of the community rules?
what we should do to help the community grow and user participants?
*Join our subreddit and we will randomly draw one comment to win a CR-10 SE and each of the Top 5 upvotes comments will win 1.0kg HP-TPU.
*Giveaway ends at 11:59 pm 16th Nov EST, winners will be announced on 20th Nov. Suggestions are always welcome!
My Blue Beetle helmet, printed on my K1 Max, didn't sand or fill it, just painted and put magnets on the pieces i have removed in the pics. Perfect fit too
A few months pasted since 102. There are some updates (btw, here is 101 and 102)
Most issues with part 1&2 have already been fixed by Creality. You should be getting a quite good machine if you ordered lately. (unless you are still that "lucky" receiving some old oversea warehouse stock)
Here is the updated Check list(can skip the first few if you already read 101&102 before) :
0.) [MUST] Check if the power supply is set correctly to your country or not, remove the 3 screws on the bed
check all the screws and see if they are properly tighten or not. There are few case now shows unscrewed flying bed from open box. And at least one of the case with missing screw, apparently someone in the assembly line forgot to screw the screws [v: ErrorE002 key2060]
1.) [Highly recommend] Check if your frame is bent or not
check if X and Y can move without "scratch" and check if the door can close completely and check if there is any visible bend. If there is any, please contact Creality for replacement. This issue is not fixable, and consider treat your local deliver driver better. Or if it is from some new carrier companies, maybe try file some complaints.
2.) [optional but highly recommended] Check if you got the v1 hotend(black sock) or the v2 hotend(red sock)
V1 and V2 on function are the same, but V1 is extremely easy to break the cable when you run the maintenances, also the thermo sensor of V1 seems have QC issue, it will burn itself after enough hours of prints. If you have Error 2507 and have a V1 hotend, please contact Creality CS for replacement ASAP. The only way to solve Error 2507 is with new hotend.
Highly recommend to upgrade your hotend to 3rd party hotend. If you are looking for higher flow, go for Trianglelab CHCB-OT Hotend and pair it with a MK8 CHT nozzle. If you want leak-proof nozzle and able to do cold nozzle change, go for Micro Swiss FlowTech Hotend.
3.) [optional but highly recommended] Check if you bed is trim/level
Creality have confirm solved the assemble issue in their production line for bed leveling. And Creality said the auto bed leveling can overcome any different of less than 3mm in the mesh. But if you are having unlevel bed issue, please check out this page for more info, you don't need to print the dial indicator mount and own a dial indicator, the mesh info by the machine is good enough. Follow one or more of the listed methods to trim your bed.
4a.) [optional] Check if you got the v6 extruder or not
Here is the list of changes:
v1.) more reliable lever v2.) adjusted the gear QC v3.) added Loctite/glue to secure the gears avoid from loosening due to vibration v4.) added the heat insulation sheet, changed lever material again(now magnetic and matt color) v5.) changed gear screw color from red to sliver, more reliable lever(the cut out is different) v6.) changed into white top with spring locking
Normally v4 is good enough, but if you are unsure. just start print something out. and if you have any under extrude issue, contact Creality for replacement extruder via Cloud App Chat function during China working hours for quick response.
4b.) [optional] Remove bowden tube from drag chain for smoother extrusion
also remove 2-3 links from the chain and maybe print some clips to clip back the tube, or cable tie
5.) [Highly recommend] Don't use the glue stick for PLA or even PETG
also open top cover when print with PLA(reason below at point i4). If you are using vented raiser, it should be consider as open top. So add tape to cover up t he vents if you are printing things like ABS which needs enclosed environment.
Glue stick is to prevent prints from sticking too well to the plate. For easy release. So just put glue stick on the area of the purge line and at the back of the plate, where the nozzle got wipe clean.
If possible, get a 3rd party textured PEI / PEO / PET plate, PEI plates are GREAT.
If your prints are not sticking to the plate, the smooth stock plate or textured plates. Go wash the plates with warm soap water and a brush, once air dry, the plates will stick to the filament again.
6.) [Highly Recommend] 270 door hinge and fan guards
270 Door hinge if you don't want to be next Uncle Jessy . K1 max version also available on printables
7.) Forget about the temperature settings you used to use on other machines.
Fast printing need higher temperature. just run all the calibrations for your each material following the tutorials and use the result as setting for that material. Remember, sometimes even same brand same material, just different color, might already have different results.
Here is a temp chart from Creality just in case you don't got the sticker version inside your K1s.
Don't trust it too much, there are too many variables. For example, TPU70 and TPU90 is totally different story. Do your calibration tests and trust the result you got from the tests.
First make sure not a hardware issue, ie. not clogged, and your extruder is v4, not trash v0. Then run the 3 flow test under the calibration menu in Creality print. Adjust the print settings accordingly
i2.) print not sticking to bed
First, no glue for PLA or even PETG(see above, point 5), then make sure your bed is trimmed/leveled, then adjust your z-offset if needed
i3.) clogged hotend/throat
Some said since they added a filament cleaner, problem was solved as they are placing their K1 in workshop full of dust. Actually I have never clogged any hotend or throat, but I have been feeding K1 directly from an active filament dryer box since day 1, I guess that also prevents dust as well? (btw if you are looking to get an active dryer box, remember to get one with fan, so much different)
i4a.) filament debris build up overtime, two main reason for this:
i4a-1.) nozzle temp not high enough, under extrude but the extruder is powerful enough(good surface contact) and grind off the surface of the filaments, forming debris over time. to solve this, just clean up and increase the print temp on your next print
i4a-2.) old filament turn bad and become brittle, to solve this only solution is to send the bad roll to recycle
i4b.) filament semi-melts and deform inside the extruder, this is because the nozzle temp not high enough, but the heat builds up and accumulate from throat into the extruder through the filament, hot enough to slightly deform the filament. To solve this you just need to clean it up and increase the print temp on your next print, also keep lid off when printing with low temp filament
To overcome this issue, i have been using this fan mod since Aug2023 and it works very well.
i5.) Tree support
Does Creality Print have tree support? Yes.
Why I can't find it? Because the UI designer should be fired
i6.) VFA
For low speed VFA(means you only get VFA on low speed but no VFA on high speed) this is a known issue, Creality CS told me this is a mixed result of buggy slicer and buggy firmware(the word they used in direct translate should be imperfect/unfinished, but i think buggy fits more) And Creality said they are working on it, hopefully will fit soon in upcoming updates.
For high speed VFA, you will need to check your belt tension first
Yes you can, but most of the K1 profiles in other slicers are still on beta stage. Most of them have all kinds of issues. I am not saying Creality Print is good. But there have no BEST slicer at the moment. Slicer A can do this special function while slicer B can do that other special function. Creality Print don't have all those special functions and actually lack of some important function if I must say. But it is still the only slicer that can provide the fastest print time for K1 series. Same detail settings, I don't know why using Creality Print to slice will have less print time than other slicers, just CAN'T understand.....
And if you really want to use other slicers, you can now even root your K1 series, to get direct access from slicer programs/interfaces instead of the old way of getting the Gcode file and transfer to the machine via Creality Print/USB. Here is how to root your K1/K1max. But if you are a newbie, I would highly suggest you to stick with creality print for now to learn more about 3d prints first.
And at last, here is the official Creality channel with tutorial video on simple part changes
At the beginning I tested a model with normal PLA and found the parts really great and clean. Then I wanted to change the filament to PLA Silk, set everything up correctly and the first part was really clean. However, when I wanted to print 20 pieces, it got significantly worse after the third or fourth print. I suspect that the K1 does not tolerate Silk well. What do you think?