r/Conspit • u/conspit_pitcrew • Sep 14 '26
$699 Track-Ready Performance Bundle
Everything you need to get racing, right out of the box. Easy to set up, flexible to install, and built for serious performance
r/Conspit • u/conspit_pitcrew • Sep 14 '26
Everything you need to get racing, right out of the box. Easy to set up, flexible to install, and built for serious performance
r/Conspit • u/Clean-Asparagus7836 • May 07 '26
We are in need for a console compatibility adapter like Sigma cortex or resolution for our conspired products, console Gamers need to explore your products as well.
r/Conspit • u/EchidnaSorry8449 • Jun 04 '26
Because a racing wheel has to do more than look good.
It needs to handle the forces from direct drive feedback, repeated inputs, and long racing sessions while keeping every touch precise and consistent.
With a 5mm real carbon fiber front plate and a rigid aluminum alloy body, MAX01 is built for strength, rigidity, and a more confident driving feel.
r/Conspit • u/ldusoswa • Nov 18 '25
r/Conspit • u/conspit_pitcrew • Sep 11 '26
Follow Kireth behind the scenes to discover how CONSPIT hydraulic pedals are filled and prepared.
Through vacuuming the cylinder and precisely injecting hydraulic fluid, the process removes air from the system to ensure consistent pressure and a realistic braking experience.
Every step matters when creating a true hydraulic brake system.
Watch the full factory tour:
https://youtu.be/vs1btVQXYEA?si=C-Nl32tLUOxjCdkz
#CONSPIT
#SimRacing
#HydraulicPedals
#BehindTheScenes
#SimRacingHardware
r/Conspit • u/Latter_Ad_594 • Aug 31 '26

ISSUE- 8/31/26 3:37PM EST
CONSPIT inspected my returned GT300 and confirmed the defects themselves — a missing washer on the clutch paddle and a damaged magnet. Their email then gave me two options: repair the same wheel and send it back, or refund only 90% of what I paid.
The problem is that their own Refund Policy says under “Defective Products (Within 30 Days)”:
“No service fee will apply in confirmed defect cases.”
Yet they are withholding 10% anyway.
On a GT300, that’s roughly $40 gone for a defect that was not the customer’s fault. On CONSPITs products like the FC-PRO cockpit a 10% deduction would be roughly $1,190 in loss at no fault of the consumer.
It gets worse: earlier in the same email chain, CONSPIT specifically told me that once they received the wheel and confirmed the issue, they could provide a “replacement brand new unit.”
They received it. They confirmed the defects. And now the brand-new replacement isn’t even one of the options they offered.
So if you don’t want to wait weeks just to have the same defective unit repaired and shipped back, CONSPIT is effectively locking you out of part of your own money, despite their own policy saying confirmed defective returns have no service fee.
UPDATE - 9/1/26 3:00PM EST
CONSPIT’s DEFECTIVE RETURN PROCESS FAILURE
CONSPIT has gone through this thread, reviewed the situation, acknowledged that the 10% deduction was incorrect, and has taken steps to try to make things right.
At this point, I’d like to keep the discussion focused on the actual situation rather than turning this into endless side arguments or useless criticism. I’m also not interested in smearing CONSPIT. The entire point of this post was to document what happened, bring attention to the incident, and make buyers aware of the experience.
Now that CONSPIT has acknowledged the mistake and started addressing it, things are looking much better. That said, I’m not going to consider this fully resolved until I know the underlying support process has actually been reviewed and improved. That’s also why I’m asking to speak directly with management — I want to understand what went wrong internally and what is being changed so another customer doesn’t have to go through the same thing.
One concern I still have is that CONSPIT’s position only changed after this post began gaining attention. Their initial public response actually defended the 90% refund, and it was only afterward that management reviewed the case, admitted the deduction was incorrect, and approved the full refund. I can’t know whether the outcome would have been the same without the public attention, but that uncertainty is exactly why I think the internal support process needs to be reviewed.
I have also specifically asked to speak directly with management or whoever is overseeing that internal review. So far, that request has not been addressed, and communication continues to be relayed through the same support representative involved in the original handling of the case. I appreciate Jerry’s help, but if CONSPIT is genuinely reviewing what went wrong internally, I think it is reasonable for the affected customer to have an opportunity to speak directly with the people conducting that review.
I’ll make one FINAL UPDATE once CONSPIT follows through on everything they’ve promised and the resolution is fully completed.
For now, stay tuned. Credit where it’s due: they have engaged with the thread, acknowledged the issue, and are actively trying to make things right.
UPDATE - 9/20/26 5:02PM EST
I decided to delete the separate follow-up post I had made in a new thread and will keep all future updates consolidated here. The post was intended as a summary/status update, not as a continued escalation against CONSPIT, but it was being heavily misinterpreted by people who never understood the full context.
Since my last update, I was eventually put in direct contact with Bryan Zhu, CEO of CONSPIT USA / Vice President of CONSPIT. Communication improved significantly once he became involved. Bryan reviewed the case, acknowledged that the original 10% deduction was incorrect, took responsibility for it, and explained that CONSPIT has since changed its internal process so that uncertainty during an inspection is not passed financially onto the customer and departures from the defective-product policy require management approval.
My original GT300 refund was issued in full. CONSPIT also provided me with a goodwill coupon. After speaking with Bryan and receiving reassurance regarding future warranty support, I decided to give CONSPIT another chance and personally paid out of pocket for a MAX01, which arrived Friday, September 18.
I am genuinely very impressed with the MAX01 itself. I am currently dealing with a separate USB/LCD connection issue where SimHub intermittently reports the wheel as “Partially Connected.” Bryan is already working with me on that issue, so I am waiting to see how it is resolved before I consider the entire experience concluded.
I still have reservations about the original support process and how difficult it was to reach the correct resolution and eventually get direct access to management. I cannot know whether the same outcome would have occurred without the original escalation, although CONSPIT maintains that the case changed because it was reviewed again. What I can say is that Bryan has been extremely communicative and transparent since becoming involved, and I appreciate that.
I am also still working on an in-depth review/video documenting the entire experience, including the original GT300 issue, the support process, management’s response, my MAX01 purchase, and how this current technical issue is ultimately handled.
I’ll keep any further updates here and post one FINAL UPDATE once everything is fully resolved.
FINAL UPDATE - 10/24/26 2:14PM EST - RESOLUTION
I’m very happy to finally close this thread out on a positive note. Everything has now been resolved, CONSPIT followed through on their end, and I’m genuinely satisfied with where things landed.
After I was put directly in contact with Bryan Zhu, CEO of CONSPIT USA / Vice President of CONSPIT, the experience changed dramatically. Bryan was consistently communicative, helpful, transparent, and willing to keep working through every issue until there was an actual solution.
The original GT300 refund was issued in full, I was provided a goodwill coupon, and I decided to give CONSPIT another chance and purchase the MAX 01.
When I later ran into the separate USB/LCD connection issue with the MAX01, Bryan continued working with me through it. CONSPIT sent me a replacement USB cable and then a power injector/amplifier, which I have now received and tested. Everything is working properly and that issue has been resolved as well.
I genuinely have nothing but good things to say about how Bryan handled this case. He went above and beyond and, frankly, was the saving grace of my experience with CONSPIT. If more support representatives communicated and followed through the way he did, I really wouldn’t have any issue with CONSPIT support at all.
That is probably my biggest takeaway from this whole experience: effective communication matters enormously. Customers need a clear path to someone who understands the problem, communicates what is happening, and actually follows the case through to completion. Once that happened here, things started falling into place very quickly.
I also want to address the original headline of this thread. I take that statement back. The original situation and criticism documented here were real, and the process was stressful and much more cumbersome than it should have been, but CONSPIT acknowledged the mistake, corrected it, continued supporting me, and made good on the situation.
I’m leaving the thread up because I think the full timeline can still serve as a useful example of why good customer-service practices, clear escalation paths, and strong communication are so important.
As for the MAX01 itself, I am a very happy customer. I think CONSPIT did a great job designing and manufacturing this wheel, and now that the connection issue has been resolved I’m thoroughly satisfied with it.
Thank you again to Bryan for the amount of time, communication, and effort he put into getting everything sorted. CONSPIT made things right, and I’m happy to end this thread on a positive note.
r/Conspit • u/venusmemnoch2 • Sep 01 '26
Start on Le Mans 24, Automobilista 2, Mercedes GT1 2005 🙂
r/Conspit • u/EchidnaSorry8449 • Jun 10 '26
Yifei Ye Limited Edition
Coming soon.
A limited racing setup inspired by champion spirit.
Signature details, race-ready control, and a complete immersive driving experience.
Share the same key with Le Mans Champion.
Stay tuned.
r/Conspit • u/venusmemnoch2 • Sep 02 '26
r/Conspit • u/venusmemnoch2 • Sep 19 '26
Assetto Corsa with DLSS5 on triple screen, and using the new Conspit's wheel FX290 :)
r/Conspit • u/Conspit-CM • Jul 13 '26
Modern sim rigs are full of USB devices.
Wheelbase.
Pedals.
Wheel.
Shifter.
Handbrake.
Dashboard.
Button box.
LEDs.
Headset.
SimHub devices.
And somehow we expect all of them to behave perfectly while fighting for USB ports like it’s Turn 1 at Monza.
When USB stability is bad, the symptoms can look random:
Wheelbase disconnects.
Buttons stop working.
Pedals disappear.
Dash freezes.
LEDs act weird.
Software stops detecting devices.
The tricky part?
This can look like a hardware fault, firmware bug, game issue or software problem.
Sometimes it is.
But sometimes the real issue is the USB chain.
Motherboard USB chipsets can be sensitive. Some ports may not deliver stable power under load. BIOS updates or chipset driver changes can also affect USB behaviour and create disconnects that were not there before.
Electromagnetic interference can also play a part, especially in rigs with strong direct drive wheelbases, power supplies and lots of cables packed close together. In some setups, USB cables running too close to power cables or the wheelbase PSU can cause strange connection issues.
That’s why the boring checks matter
Use rear motherboard USB ports.
Avoid cheap unpowered hubs.
Try different USB ports.
Keep USB cables away from power cables and PSUs.
Avoid long extensions.
Check BIOS and chipset driver changes.
Test with only the essential devices connected.
Try another cable.
Ferrite cores can help in some cases.
Support teams ask about USB early because unstable USB can imitate many different problems.
Before blaming the wheelbase, pedals, sim or firmware, check the USB path first.
Sometimes the gremlin is not inside the hardware.
Sometimes it’s hiding in the cable.
#SimRacing
#DirectDrive
#SimRacingHardware
#USBIssues
#USBStability
#Wheelbase
#Pedals
#SimRig
#Conspit
r/Conspit • u/Conspit-CM • Sep 25 '25
Season 4 of the CONSPIT Porsche Cup just kicked off under the Mexico City sun at the freshly released Autódromo Hermanos Rodríguez and what a way to start! 🌮🇲🇽
This 2.67-mile circuit is a beast: endless straights that demand courage on the brakes, followed by tight, technical corners where mistakes cost you everything.
🔥 The opener had it all: • A four-car scrap for P15 that had the broadcast shaking. • Brian Lockwood storming through the field from P20 → P8, proving that nothing in this series is ever set in stone. • And of course, the Porsche 911 GT3 Cup (992) raw, unforgiving, and spectacular to watch when pushed to its limits.
🚀 The grid is stacked, the racing is tight, and this season is already shaping up to be our best yet.
👉 Full Race Replay: https://youtu.be/dmEp1qDLimI?si=hB44wEpE26GdwOyv
👋 Calling all iRacing fans! If the thought of door-to-door Porsche Cup action gets your heart racing, come join our series. Whether you’re chasing podiums or just love the fight for every position, there’s a spot for you on the grid.
🔗 Learn more & connect with us: 🛒 conspit.com 📱 linktr.ee/CONSPIT
PRO DRIVERS’ CHOICE. Always.
r/Conspit • u/Sea-Professional3976 • Jun 01 '26
Issue as titled, I cannot bind any key to my wheel. I have Simagic base which has ffb in FH6. But for my Conspit 300 GT which is plug into USB directly cannot bind any keys to the game. I heard the game doesn't recognize wheel with more than 100 input which 300GT does
r/Conspit • u/Conspit-CM • Sep 21 '25
Every racer remembers their first wheel. Some were clunky, some were fragile, and most left us dreaming of something better. That “one wheel” that could carry us through rally stages, drift corners, and GT endurance races without breaking the bank.
The APEX 310 is exactly that wheel.
Born from motorsport DNA, this 310mm steering wheel beast doesn’t just sit on your rig it belongs there.
From the moment you grab its 310mm round wheel rim, it feels like home. A full-metal chassis gives it motorsport strength, while the 2.99” LCD dash delivers live telemetry without the need for extra add-ons. Fire up your rig and the 41 fully customizable SimHub LEDs ignite like the start lights at Spa.
On track, every input feels natural:
Dual funky switches & rotary encoders for quick mid-race adjustments
RGB push buttons you can map & customize however you like
Hall-sensed magnetic paddles (shifters + clutch) with that precise, snappy feel
Multi-rim compatibility – one hub, endless styles
Universal 70mm PCD mount so it pairs with most popular wheel bases
104 fully programmable inputs to handle even the most complex setups
SimHub & DNR LED profiles pre-configured just plug in and race ⚡ Lightweight but rock-solid build for endurance sessions lap after lap
And the kicker? It’s not locked behind a crazy price tag. At just $349, the 310 APEX delivers a premium experience without compromise.
This isn’t just another wheel. It’s the wheel that makes you want “one more lap”… then another… and another.
👉 So, who’s ready to mount the 310 APEX on their rig? What setup would you pair it with?
🛒 conspit.com 📱 linktr.ee/CONSPIT
r/Conspit • u/venusmemnoch2 • 8d ago
A good Livery, is a livery with Conspit's logos :)
r/Conspit • u/MERDOVSKI • Aug 01 '26
r/Conspit • u/Previous-Cicada-454 • Jul 01 '26
Can anybody share their 300GT button layout with our without sticker for f125?
r/Conspit • u/Accomplished_Oven857 • Aug 12 '26
This is a stupid question, but I wanted to get the Ares 20 platinum base since it is on sale now. But I don't have space for a rig right now. Going to move in a few months, plan on getting a rig after my move.
So, if I buy the Ares platinum base, can I table mount it and use with less force in the mean time ? I already have a Conspit 300GT, so I plan on switching to Conspit base and pedals.
And if table mounting does work, can I use the Moza R5 mount I have right now or does conspit sell a separate table mount ?
Thank you.
r/Conspit • u/conspit_pitcrew • 20d ago
r/Conspit • u/abablawan • Nov 15 '25
Hello,
I am planning to buy the conspit pw1 but I have few questions, does this wheel work with third party wheel bases? Like simagic? Also does this wheel have a joystick to ease menu navigation? Thanks
r/Conspit • u/conspit_pitcrew • Sep 07 '26
From the desk to the track with EX300 APEX.
End the day with a few fast laps.
#CONSPIT #EX300APEX #APEXBundle #SimRacing #RaceMode
r/Conspit • u/Kotel777 • Dec 13 '25
I currently own thrustmaster t300 wheelbase and I really like the look of conspit. I have the money for the wheel but not for a DD wheelbase for now so I'm thinking about upgrading gradually. Do u think it's a good idea? I have access to thrustmaster adapter. Thank u for any advice!