r/ComputerEngineering • u/Dependent_Ebb_2769 • Apr 27 '25
[Project] Advice for a student
Hello all, I am about to wrap up digital design 1 this semester and will be taking 2 in the fall. I have a few weeks of free time before I take summer courses. I want to start making designs that challenge me and help me learn practical skills my classes may not show me. I also want to start creating projects that will attract eyes to a resume for an internship. Im planning on building a simple ALU with registers, both of which have been lightly touched on in my course but not built through.
Im hoping for any advice that you have for someone searching for job opportunities in a dry market. Whether it is working through specific projects, reading into specific architectures, or even taking breaks when I can get them; all is welcome.
Check out this binary to 7 seg design I made. What do you all do when designing logic?
Thanks for checking out the post!
5
u/Johnsilverknight Apr 27 '25
I have no contribution to make to this post nor your question because my school's CE curriculum is mostly CS based. I've also just finished intro to electrical engineering and learned nothing due to a bad professor (great guy tho). Anyways, I recommend using TINA TI, even if ancient. It is a program made by Texas Instruments and is free. It lets you design circuits as well as run simulations on them. I am sure there are better programs that do this out there but this is just one that I know of. Good luck with school and your projects!
1
u/Dependent_Ebb_2769 Apr 27 '25
That is awesome. I figured there was an online program to construct the design and test, but FREE? You are speaking my language. Thanks your the advice, will take you up on that
3
u/jbjgang2 Apr 27 '25 edited Apr 27 '25
For digital logic I recommend something more like Intel Quartus Prime. It’s designed specifically around digital logic circuits while TINA is more geared towards electrical engineering. There is a free lite version with more functionality than you’ll ever need that I used to pass all my digital logic classes. It comes with a built in simulation tool called Questa but if you have access to some kind of FPGA development board thats even better (Edit: I think it has to be an intel/alterra board but dont quote me on that)
1
u/Johnsilverknight Apr 27 '25
You will have to create an account and whatnot but it’s free. I don’t think I had to use my school email.
4
u/The_Mauldalorian Electrical Engineering Apr 27 '25
Hmmm we always used Logisim to design our circuits. It's looks archaic but it's at least free! My prof made a dark mode fork for us which was nice of him.
2
u/Dependent_Ebb_2769 Apr 27 '25
Thats cool, i wonder how difficult it would be to make a dark mode... i will for sure jump into Logism over the break!
Thanks for replying, i appreciate the advice.
2
u/salty_boi_1 Apr 27 '25
If you really wish to learn try to go into logisim evolution for logic design and into vivado (if you're american if not use quartus prime) and learn either vhdl(to my knowledge old and difficult but can guarentee a job for you in weapon manufacturing) or verilog and when you fully grasp the programming side then you can buy an fpga designed for your specific fpga programmer app (intel fpga for quartus and amd for vivado) and learn the hardware side of things
1
u/Dependent_Ebb_2769 Apr 27 '25
We are indeed American. My wife is wanting to move to Scotland in a few years, do you think I should focus on one or the other? Im not sure what is popular in Europe or maybe both, if not one or the other.
Thank you for posting man, i appreciate your advice!
1
u/salty_boi_1 Apr 27 '25
Well if you could use vivado for their fpga as you can buy a basys3 which amazing for beginners and is pretty popular whilst being a bit on the pricey it's still not that expensive for what it is but if i think you might able to get one used for a pretty good price
2
u/Jake_Hates_PETA Apr 28 '25
Do a run through of Nand2Tetris and then do it again in verilog. It's a fun, free class online
1
Apr 27 '25
I use intel Quartus prime with verilog. Would've hurt to take a look at it before you cover it in the fall.
1
1
u/Comprehensive_Pen435 Apr 28 '25
Ok use logisim evaluation then if you can start with Verilog and build some small real-word projects. Learn about ALUs, Controllers, inspire yourself with simple yet powerful projects you find online, surround yourself with (( CE )) experts online. The field is huge and evolving, good luck man.
1
0
31
u/fftedd Apr 27 '25
You should try making this design in Verilog, which is the industry standard coding language for digital circuits. If you don't know what verilog is, learn it. ChatGPT is probably good enough for you to check your work.
You could pretty easily take this and then make a test bench to simulate. There are free tools out there to make simple verilog designs and simulate them, which should be good enough for the designs you are thinking of trying out. These won't be industry standard but the more powerful tools are all proprietary. This way you also won't have to make a complicated breadboard, digital designs can get complicated fast that way.
For something simple that you can do to make yourself stand out, learn Linux, a good text editor (Vim or Emacs), and a scripting language (Python, etc.). Knowing your way around a Linux environment, being able to manipulate logs and reports, and being able to automate processes is important to any hardware job, and is something commonly looked over when learning only theory.