r/ChevyTrucks • • 17m ago

TBI to carburetor headache

Thumbnail
gallery
3 Upvotes

Just sharing my barn find, '87 R30 with 40k miles. Got it to start and run fairly easy, but transmission shift 2-3 was pretty jacked up. Replaced transmission then it would not start. Replaced TBI and still wouldnt stay running. finally just decided to swap it to carb. Learning lots of little things along the way.

At the moment trying to bypass the tank pumps, (they were pushing 40psi).

What a journey lol


r/ChevyTrucks • • 24m ago

Why is my truck not starting? Battery isn’t draining and alternator is good.

Thumbnail reddit.com
1 Upvotes

r/ChevyTrucks • • 1h ago

2026 Chevrolet Colorado Trail Boss: Interior

Thumbnail
youtu.be
0 Upvotes

r/ChevyTrucks • • 3h ago

2006 chevy 2500 6.0 5spd.

1 Upvotes

Hello all. I’m a heavy equipment mechanic, and don’t generally mess with automotive.

My dad has a (see title) and is extremely low miles as he got it from my grandpa. Been an amazing truck. When he first got it the slave cylinder was blown out and you couldn’t drive it without starting it in gear and floating the gears. So he bought a new clutch kit from Oriellys with the lifetime warranty, and also a new slave cylinder. We installed the new slave cylinder, installed the new clutch with new pilot bearings. We did some research on how to bleed the clutch system with the internal slave cylinder and it has a bleeder that comes out of the side of the transmission. But online we found that you have to press in the slave cylinder by hand so many times and still bleed it and all this other stuff. In other words a PITA. Anyway we got everything out together and the transmission reinstalled to find that the clutch hooks up very very low. So low that you pretty much have to lock your leg out to get it into gear. This has a plastic pedal as well fyi. The master cylinder has a ball if I remember correctly that connects to the pedal. Well it was thumping real bad and you can tell that the pedal needed to be replaced but dad ended up buying a new master cylinder and we put that on and bled the system again with a vacuum pump bleeder and just kept cycling fluid through the system. After multiple hours of doing this it finally started to hook up higher. After it was hooking up higher and the truck was actually drivable we left it and this all took place around October of 2023.

Fast forward to today. Clutch was slipping, asked me to do it. Said sure no problem I’ll leave the clutch system hooked up so I don’t fuck with that nightmare.
Started yesterday in it and removed the transmission, got the clutch out and sure enough absolutely cooked clutch. (He knows what caused it) got everything reassembled. Everything looks good no other issues. Reinstalled everything, got everything bolted up, and started her up, truck sounds good and all, lo and behold the clutch is hooking really low again. Wtf. It’s dark and raining. I went and picked him up to get his truck, and we tested it again and I broke loose the bleeder and tried bleeding it a little with him pumping it 5 times and holding while I broke the bleeder loose. Absolutely no bubbles coming out of the bleeder. I literally didn’t touch or disconnect anything on the hydraulic side of it. You can get it in the gears and you can drive and shift nice and smooth, but man you have to mash your foot through the floor board to get it to disengage. I let him have it to drive for a day or so to let me know if it works the pressure plate resistance a little less or anything. But I am at a loss. Has anyone else ran into these issues? It has to be a symptom of the new parts. That’s the only thing I can think of. Any help is absolutely greatly appreciated.


r/ChevyTrucks • • 12h ago

AS A HUGE LORE NERD ON GMS AND NOT INTO RELIABILITY AT ALL I WISH THE COMMENTS OF THEM WOULD STOP SO BADLY PPL TALK LIKE THEY'RE A STOCK 6.0 POWER STROKE WHICH I KNOW FAILS OR EVEN WORSE GAME BUGS LIKE BEAMNG LIKE BRO THIS IS NOT A FACEBOOK FORUM!!!!!!😭😭😭😭😭😡😡😡😡😡😡🤢🤢🤢🤢🤢🤢🤮🤮🤮🤮🤮🤮

0 Upvotes

WHEN I SAW "TRANSMISSION SLIPPING ISSUE" OFF THE 8.3L DURAMAX REVEAL YOUTUBE VID I KINDA RECOGNIZE THAT SOUND I SAW A TAN 1996-02 GMT600 EXPRESS OR SAVANA IN PERSON ON THE ROAD DO THAT NOW MY SOUL LEFT MY BODY!!!!!!😭😭😭😭😭😭😡😡😡😡😡😡

HONESTLY I'M SURPRISED TRUCK DOESN'T LITERALLY MEAN WHAT ACTUALLY LOOKS LIKE ONE NOOOOOOOOOO SADLY IT MEANS EVERY SINGLE THING WITH A BED INCLUDING NASTY DISGUSTING GARBAGE LIKE TUNDRA TITAN TACOMA 14TH GEN F-150 OR COLORADO/CANYON


r/ChevyTrucks • • 13h ago

07-13 Silverado door trim hack

Thumbnail
gallery
3 Upvotes

My son wanted the door trim taken off his truck..and i lacked some tools necessary to do such task. Heres what i came up with.

  1. Carefully peel off the door trim (it will probably crack in the process) I used fishing line on some spots

  2. Use a heat gun and painstakingly peel off glue with your thumb or redneck yourself an eraser wheel by taking a piece of fuel line, driving a bolt through, and tighten a nut around it.

  3. Stick the redneck eraser wheel into a drill and barely apply pressure to the glue (it will burn through the paint if in one spot for too long).

  4. Wipe down leftover residue with E87 gas and water.

  5. For dirt I used regular dawn dishsoap on a wet towel.
    5.5. For caked on dirt i used water and a rag.

Came out perfect and exactly how he wanted! Be sure to wash the truck afterwards for a better look.


r/ChevyTrucks • • 15h ago

Need thoughts on this purchase

Thumbnail
gallery
7 Upvotes

Hey everyone thinking about purchasing this 2000 Chevy Silverado for $3700 description pic is provided has 165k miles just need some help to decide wether to buy or not thanks


r/ChevyTrucks • • 17h ago

What’s the most confusing code your truck/SUV has ever thrown?

0 Upvotes

I’m curious what codes have given people the most trouble.

Not the easy ones — the ones that:

* didn’t match the real problem
* sent you chasing parts
* kept coming back
* or made absolutely no sense

Drop the code, the truck, and what it ended up being.

I’m trying to understand which codes cause the most headaches for DIY owners.


r/ChevyTrucks • • 18h ago

Help assessing truck value.

Thumbnail
gallery
14 Upvotes

First, thanks in advance for any and all help with this. Appreciate your time.

Located northern Illinois.

I’m trying to help my mother sell one of my father’s trucks. It’s pretty much sat outside its entire life. Runs great. Hauled a bunch with it this summer. 2000 Silverado 2500 HD. 6L V8. Never had any engine mods. Extended cab. Interior is leather. In solid shape but needs a good cleaning. 110k miles. Batteries are newer. Tires likely need replacing just due to age. Right front turn signal doesn’t work. Water has gotten into both front lights. Lower body is rusted.

Have no clue what it’s worth selling privately so just trying to get a rough estimate.

Thanks again!


r/ChevyTrucks • • 19h ago

My neighbor coming down his driveway looks like an awesome Chevy ad

Thumbnail
gallery
28 Upvotes

r/ChevyTrucks • • 20h ago

Chain reaction of failures on my '84 Chevy C20: Distributor install ➡️ Carb fire ➡️ Snapped throttle shaft screws. Anyone have a spare Edelbrock/Carter shaft sitting around?

Thumbnail
gallery
2 Upvotes

Hey everyone,

I’m working on my 1984 Chevy C20 (350 V8) and hit a massive wall after a wild chain of events this week.

It all started when I was installing my new HEI distributor. I had a backfire while trying to get the timing dialed in, which started a small fire at the carburetor.

After getting the fire out, I pulled the carburetor off to inspect it, clean off the burnt residue, and give it a thorough rebuild. My carb is an Edelbrock AVS2 650 CFM (#1906 with electric choke).

While taking the baseplate apart to clean everything, the tiny 6-32 throttle plate screws on the secondary shaft sheared off/snapped inside the shaft.

I’ve been calling around to local auto parts stores and checking online, but Edelbrock doesn't sell just the bare replacement secondary throttle shaft through retail channels.

Before I drop $50+ on a used core carb just for one piece, I wanted to reach out to the community here. Does anyone happen to have a spare parts core, an old baseplate, or a good secondary throttle shaft from an Edelbrock (1405, 1406, 1906) or Carter AVS/AFB sitting on a workbench that you’d be willing to sell or ship my way?

I’m happy to pay for shipping and toss a few bucks your way for the part.

Appreciate any leads, advice, or spare parts! Thanks guys.


r/ChevyTrucks • • 23h ago

2018 Silverado High Country Electrical Issues

0 Upvotes

r/ChevyTrucks • • 1d ago

35’s on Leveled 2015 Silverado

Thumbnail
gallery
22 Upvotes

I just have the rough country bottom lift which I believe is 2 inches? I fit 35’s fine, I’m running 20’s and Gladiator X Comp MT’s which are around 1/2 tread to 3/4 tread, ignore the missing center caps, I have to get open ended lugs for the back driver side.

I don’t rub at all on flat surfaces even at full lock, the only time I do is at full lock going down my driveway which is steep so it’s understandable.

Hope this helps anyone who has questions like I did.

Also, for anyone that buys a 2015 Silverado, be ready to work on it. A lot. I love it, but damn.


r/ChevyTrucks • • 1d ago

AEV Salta XD with Michelin LTX A/T 275/70/18 2020 LT 2500hd

Thumbnail gallery
6 Upvotes

r/ChevyTrucks • • 1d ago

Time capsule: one-owner, garage-kept, 13k-mile 1998 Chevy S-10 5-speed

Thumbnail gallery
15 Upvotes

Time capsule alert: a one-owner 1998 Chevy S-10 with 13,000 original miles.

This beautiful white truck belonged to my mom. She bought it brand new and was its one and only owner. She kept it tucked away in her Ohio garage until she passed away last December, one month shy of her 100th birthday. Now it is ready for its second owner, and I would love for it to go to someone who will enjoy it as much as she did.

The 2.2L four-cylinder with a 5-speed manual. Summit White over Graphite interior, with A/C and the original factory steel wheels. Garage kept and rust free, with a clean Carfax and the owner’s manuals.

It is on Bring a Trailer now, and the auction ends Saturday, November 21 at 2:01 PM Eastern: https://bringatrailer.com/listing/1998-chevrolet-s-10-14/

A one-owner S-10 with 13,000 miles is a rare find. If you know someone who has been searching for one, I would be so grateful if you would share it. I’m the seller and happy to answer questions. Thank you!


r/ChevyTrucks • • 1d ago

Looking for a 5.3LS

0 Upvotes

Looking for a good running LS 5.3, if you got one shoot me a DM. Im in az


r/ChevyTrucks • • 1d ago

My 2005 Chevy Avalanche

Thumbnail
reddit.com
0 Upvotes

r/ChevyTrucks • • 1d ago

2012 lml buy or pass

Thumbnail reddit.com
0 Upvotes

r/ChevyTrucks • • 1d ago

Looking for opinions on the 2005 Chevy Duramax

7 Upvotes

So, I don't currently drive as I don't have my license yet, but I asked my mechanic buddy for a recommendation on a truck that is tough and can pick up some speed. He recommended the 2005 Chevy Silverado 2500hd with a Duramax diesel engine. I was just hoping to get some opinions on whether or not this would be a good first truck for a new driver. Thank you!


r/ChevyTrucks • • 1d ago

2002 Chevy Blazer

1 Upvotes

Hey everyone, I just wanted some advice.

I’m currently looking for a truck/SUV to drive to work for the next couple of winters. I stumbled upon a 02’ Chevy Blazer that has about 70k miles on it and looks to be in really good condition. I’ve always been a big fan of these, especially for its looks inside and out and also that it’s a V6 and much less expensive (gas wise) than the V8 suburbans that I like.

Nevertheless, it is a 24 yr old vehicle and with that comes with risks. The shop is selling it for nearly $9000 and I was wondering if this is a listing I should take seriously or walk away from.


r/ChevyTrucks • • 2d ago

Does step capacity matter with work boots on?

0 Upvotes

A published weight rating is easy to compare but steping in with muddy boots, a tool bag or uneven footing is a different kind of use. for trucks used around work sites, what shows up first when a board is underbuiilt , fllex at the bracket, loss of grip or uneven deployment? ?


r/ChevyTrucks • • 2d ago

Fox 3.0 race series vs king 3.0

Thumbnail reddit.com
1 Upvotes