r/CherokeeXJ • u/AnotherDamnMeeting • 8h ago
IM BACK BABY!
1986 Loredo, 5 speed, 4x4 (works).
I will not be lifting it ir doing serious mods. Got some AT tires, new leafs, new shocks, and tons of driving on the way š
r/CherokeeXJ • u/AnotherDamnMeeting • 8h ago
1986 Loredo, 5 speed, 4x4 (works).
I will not be lifting it ir doing serious mods. Got some AT tires, new leafs, new shocks, and tons of driving on the way š
r/CherokeeXJ • u/Zestyclose_Resort743 • 6h ago
Got the motor back today from the mechanic excited to see how it turns out first start going to pair it with a set of banks headers!
r/CherokeeXJ • u/anon3338675309 • 6h ago
Be honest guys.. is she gone?
r/CherokeeXJ • u/Secret_Newt_4479 • 4h ago
Alright everyone. I snapped my top most water pump bolt today and want some other ideas on how to get it out. This isn't my first rodeo with snapped bolt extraction but just wanted to feedback on how to approach. I have drill bits and extraction bits, I have a bolt extractor bit (the kind with tightening jaws), and i have a welder (although the jeep is in the street so I want to only use the welder if absolutely necessary).
Every other bolt on the water pump came out fine, and I have the entire front end apart, so plenty of space. I don't need to drive this jeep in the immediate future.
How would you tackle this? Thanks in advance!
r/CherokeeXJ • u/NCSUGray90 • 1d ago
r/CherokeeXJ • u/Express_Let_2892 • 4h ago
r/CherokeeXJ • u/Express_Let_2892 • 11h ago
r/CherokeeXJ • u/contrabonum • 6h ago
My 97 XJ has had an intermittent crank no start condition. Only seemingly happens when the fuel is low, under a 1/4 tank. Starting in neutral will eventually get it to start again, and once the tank is more full, it has no issues. I did experience some hesitation under acceleration but that was before the crank no start happened so I donāt remember what the tank was reading when that happened.
I have to drive 6 hours into the middle of nowhere in a few days so I brought it into a shop. They canāt replicate the crank no start because it has a half a tank of gas now. They did a fuel pressure test and it was within spec. Not throwing any codes.
The only thing it could be would be the fuel pump failing right? 97s have the fuel filter in the pump assembly right? So might as well replace the whole assembly?
r/CherokeeXJ • u/DuDs_vs • 1d ago
Last trip of the year for me, and I can't wait for the next one!
r/CherokeeXJ
•
u/Maddox-Pino
•
1d ago
Was making a left turn when a guy ran the light going at least 60. Was still running after the crash. It was difficult but I got her home which was two hours away. (Towed obv) My dad bought her new and she was my high school project that was getting me through college. Going to get a new shell and use anything I can to keep her as close to the same as possible. The car that hit me was actually crushed to half the size and the car I slid into wasnāt in good shape either. Everyone survived with pretty much zero injuries. I walked home.
r/CherokeeXJ • u/rodentmaster • 15h ago
There was an older discussion that was talking about wiring in the RKE. It's not cut and dried, because most of the RKE kits are no-brand copies of a chinese mass-produced module with different storefronts selling it in unmarked boxes. The documentation is terrible and hard to figure out exactly what you need to do. I finally replied to that other thread, but I figured I'd put this in its own reference thread for the rest to see, as it seems a lot had problems finding what wires to splice it into. There's a decent amount of documentation for the post-1997 wiring, but the earlier models seem to have different color wires depending on the source of the info.
My 1995 XJ Country already had power doors and a factory RKE (the really sucky one). My goal was to replace that receiver and just trigger the door locks with a new modern RKE. It took a little figuring out and a couple blown fuses. I hope this helps any others still trying to map out their wires.
I have the full overhead console, and that is where I mounted my module. You could do it under the kick panel, as it has the same wires.
I snipped the wires on the original plug and spliced them into this RKE I got off amazon.
Image 1: The wiring coming out of the RKE receiver and its provided plug pigtail
Image 2: The 4 wires I snipped from the OEM plug
Image 3: Pic 1 of the splicing of the two
Image 4: Pic 2 of the splicing of the two
The last two have the wires in the same order in both pics. It was difficult to get a clear photo showing the white/black wire (I had to twist it) so two photos were taken.
Below is my order. First color is the solid, second is the stripe. So white/black is a white with a thin black stripe.
Cut and discard blue/orange.
RKE white/black goes into GM pink/blue
RKE black goes into GM black (gnd)
RKE red goes into GM pink (power)
RKE white goes into GM orange/purple
I don't recall if I had to do anything else. I know I tried different things first and they were wrong, but the basics are: for the RKE the white and the white with black stripe are the positive and ground (I forget which is which right now) inputs for the lock actuators. You're plugging them into the +/- on the GM side. The red and black power the module. Yes, it does have a passive draw at all times. I think you could pull the fuse on the red line to shut that down for long-term storage if you wanted. Or just get a battery disconnect switch under the hood.
I hope this helps. I've been using this key fob reliably for over a year now. I wanted the smallest, least-intrusive one I could find. I could NOT locate a wire to flash the lights, so I left that out of my setup. I believe you'd have better luck finding that under the dash or driver kick panel.
r/CherokeeXJ • u/Pitiful_Heart_4500 • 1d ago
1985 5 speed 4x4 2.5 and 0 rust
r/CherokeeXJ • u/kseriesstocker • 1d ago
I have been doing LOADS of research on what oil these 4.0ās like. General consensus seems to be, literally anything that resembles oil, or Rotella T6.
I am concerned that I donāt see the āFor Gasoline Enginesā star certification on it. And the fact it says āDiesel Oilā. Is this the good stuff or not?
Thanks!
r/CherokeeXJ • u/VamonosBarca • 12h ago
My xj is a 4.0 1994 2 door sport 2wd, itāll start during normal temps like 75 and up just fine for the most part, but ever since winter comes along it really struggles to start, but once I get it going, its fine for the rest of the day. Ive currently replaced the starter, temperature sensor, battery. Spark plugs are just shy of 2 years old. at this point its just trial and error. Any help would greatly appreciated, thanks
r/CherokeeXJ • u/Sweaty-Magician-3007 • 12h ago
This is the sight I see on my 94 xj. I plan to tear into it this weekend and restud it. (Way easier said than done.) Itās just an off road rig that I am not really interested in spending hundreds on. Kinda just want to get rid of the tapping noise.
Has anybody had to deal with this rear bolt snapping?
r/CherokeeXJ • u/Majestic_Cannons • 1d ago
My husband has a 93 XJ (manual) that he's keeping as much to the stock look as possible. He has been wanting to replace the pedals for a while now and I think it would be a perfect Christmas gift. I'm looking for recommendations that will keep as close to stock, but still be good for heel and toe shifts.
Thanks!
r/CherokeeXJ • u/Gazzo69 • 21h ago
Hello! My wife and I have a Sahara and a XJ 1998. Xj has the 4L, is Iām good shape and has run 270000. We are considering to put the roof rack and tent on the Xj and turn the Sahara into a āopen sunnyā vehicle. Is this a completely bad idea ? Thanksš»š
r/CherokeeXJ • u/GTGCT1985 • 1d ago
Winter project with the buddy - weāre going to be making this hideously rusted trashed XJ into a hideously less-rusted , trashed XJ that can hit some trails before it parts out
r/CherokeeXJ • u/Shrapnel2000 • 1d ago
r/CherokeeXJ • u/Excuse-Sweaty • 1d ago
Hello! New here but have had an XJ with my buddy for over 6 years now. Got it March of 2020 and been budget building this thing the whole time. We take it primarily trail riding sometimes getting into some gnarly stuff but been so happy and honestly impressed with how much of a beating these things can take and just keep going.
Here's a photo of ours. Just went to three ridges events in new Hampshire. It is quite a place. If you are within a hundred miles or so it is so worth the trip. Highly recommend trailering the rig... this place is tough. But if you enjoy doing some greens/blues, you will be challenged and have a blast the whole time!
r/CherokeeXJ • u/Beneficial_Law6339 • 1d ago
Had an annoying crank no start that originally left me stalled and stranded at an intersection. To help someone else out in the future, my diagnostic path below:
* Initial issue: Progressively longer cranking, followed by engine stalling while driving and eventually cranking without starting.
* Battery: Replaced weak battery and cleaned/checked battery connections. (My battery was weak from cranking attempts and I didn't have easy access to a charger. Warrantied it out for $40 at Costco),
* OBD2 codes: Initially P0122, P0123 (TPS faults), and P1694 (communication fault).
* PCM: I had a spare lying around so I quickly swapped in spare PCM; no improvement.
* TPS: Original sensor failed resistance testing while turning the internal drive slot manually. Replaced with new AutoZone TPS; verified smooth 0.8ā4.2V operation.
* Fuel system: Fuel pump primed normally. Used Fuel pressure gauge from Harbor Freight. Fuel pressure reached approximately 50 PSI during cranking.
* CPS: Usually my #1 suspect with a sudden crank no start. Check if you get RPMs while cranking. Verified 5V reference, ground, and 0ā5V signal switching during manual crankshaft rotation.
* ASD relay and fuses: Swapped ASD relay, tested fuse continuity, and verified approximately 11.5V at the ASD-fed fuse during cranking.
* Ignition coil power: Confirmed approximately 11V during cranking. This meant that my ignition coil was getting power but doesn't confirm whether it's giving spark.
* Spark test: No spark detected at cylinder #1 or between the ignition coil and distributor. This was a HUGE clue.
* Ignition coil: Removed original coil and discovered visible cracks in its housing. Replaced with new coil from AutoZone.
* Final result: Engine started immediately after ignition-coil replacement and ran well.
Conclusion: A failed ignition coil was the cause of the crank-no-start. However, the TPS also showed evidence of failure and was replaced at the same time.
Moral of the story: don't just throw parts at it. If you have spares lying around -- sure, try them out. But follow a solid path in each circuit. Use online forums, manuals, and even AI to help you (it can be surprisingly good with diagnostic steps. Ymmv).
r/CherokeeXJ • u/enderzzx • 1d ago
I noticed Iāve been losing a little bit of coolant.. as you can there is some coolant on the bottom end of the hose and some on the thermostat housing. It didnāt look like it was leaking out when I was looking at it with the engine on but obviously it was leaking a little bit when driving if thereās small bits of coolant.