r/CardPuter • u/VergeThermalPasteGuy • 2h ago
Finds / Discoveries Probably first cardputer zero in Iceland :)
Super excited just got my cardputer zero .
r/CardPuter • u/VergeThermalPasteGuy • 2h ago
Super excited just got my cardputer zero .
r/CardPuter • u/InstantComet • 8h ago
TEST / USE AT YOUR OWN RISK.
All the analysis and testing were done with the help of Claude. I'm not going to take credit for a clanker's work.
Results (measured on my Cardputer Zero)
Idle current draw (screen off): 395 mA → 231 mA (−42%)
Estimated battery life: ~4.4 h → ~7.5 h (+70%)
What changed
USB hub & Ethernet: Put the USB hub and Ethernet controller into a low-power state when no Ethernet cable is connected. Saves ~90 mA.
Audio: Put the always-open audio stream into the null sink. Saves ~40 mA.
Launcher / LCD: Prevent the launcher from continuing to write to the LCD after the screen has been turned off. Saves ~30 mA.
What you will lose in the process
Everything should still wake up and work when you need it. At least that's the idea.
MIT license. Link down here:
https://github.com/InstantComet/cardzero-idle
Plz stop eating my link reddit
Update: It is now an app


r/CardPuter • u/Still_Idea_9495 • 2h ago
I m(ight be) an idiot, but I've been playing around with my Zero for a few hours now and I can't crack how I'm supposed to transfer files onto the SD card. This is my first time with Linux, so I'd really appreciate some help!
r/CardPuter • u/S1l3nc3x • 6h ago
Why builtin keyboard doesnt work when connected tko external monitor? And in reverse, why extwrnal keyboard dotn work in cli?
r/CardPuter • u/Ancient-Ad4454 • 19m ago
r/CardPuter • u/nits3w • 18h ago
I imagine I will get downvoted to hell for this... but so far, I'm not that impressed with the cardputer zero. I know it is in its infancy and will definitely get better. But my afternoon with it has been less than stellar.
I've tried pairing 3 sets of bluetooth headphones with no luck. One actually showed up, but right after pairing, it disappeared, and never showed up again.
For some reason, the IP address of the thing seemed to change about every 5 minutes until I added a static mapping in my router. I can now at least SSH into it consistently.
The battery drained in just a little over an hour.
The button clicks are all over the place. Sometimes it will register one click as 2-3, or other times wait 5 seconds after I click to actually take the action (just scrolling left or right).
Installing apps on the appstore is hit or miss. I'll get a 'failed: error code whatever", then reboot and it installs. Sometimes it just exits the app store entirely without saying anything while installing. I see a lot of potential in the device, but it seems buggy as all get-out.
As far as apps, some work decently, while others are almost unusable. Bruce keeps complaining that it doesn't have sudo privs, and I can find a place to enter that or a config file to change for the life of me.
I have the LoRa cap on it, but no apps seem to recognize GPS. (Raspyjack, Bruce, etc)
Navigation is also inconsistent between apps (no fault of M5) but I either use the left arrow, fn+left arrow, backspace, or esc to go back. Sometimes esc immediately takes me out of an app, other times you have to hold it for a few seconds.
If I'm just a dunce, I'll accept that...
r/CardPuter • u/Mmmmmmmoi • 23h ago
glxinfo and glxgears will not work as they require X11. Instead, you need to use the DRM/KMS kernel interface.
That means `eglinfo -B` to show hardware details and `kmscube` to do what I've done above. You can install them via the following.
sudo apt install mesa-utils kmscuber/CardPuter • u/ara1597 • 19h ago
I know it’s the wrong sub but Got em last Friday opened it today. Hope everyone gets theirs soon!
r/CardPuter • u/TheRealREZOR • 22h ago
Pocket Apocalypse, a Doom-style shooter that runs on the Cardputer ADV
There are 13 guns, and you reload them yourself. You can jump, look up and down, and aim by tilting the Cardputer (gyro controls)
Star/Download on github: https://github.com/therezor/pocket-apocalypse
r/CardPuter • u/mbs1978 • 20h ago
As stated, the Flipper was totally rocking out this unboxing video!
r/CardPuter • u/zakhooi • 10h ago
Hi,
Has anyone Bruce working on the Cardputer Zero?
I've installed it through the store app but I get on many menu options the following error:
needs monitor mode +mdk4
When I check with apt mdk4 is already installed and on the latest release.
Any suggestions?
r/CardPuter • u/zakhooi • 10h ago
Hi,
As the title says: What is the equivalent for Porkchop on the Cardputer Zero?
I realize the Cardputer Zero has just been launched and apps are still in development.
Porkchop has not been developed for Zero yet.
Any suggestions?
r/CardPuter • u/CambStateMachines • 1d ago
In case people are still looking for delivery data points, I am backer 4820 and I receive my Cardputer Zero and accessories today in the UK.
r/CardPuter • u/Mmmmmmmoi • 1d ago
IMPORTANT: Doing this voids your warranty!
You should follow a standard guides for supporting your camera on a Raspberry Pi Zero 2W, but here is what I've discovered:
- orient your 22 pin camera's connector with the pins facing the Ethernet port
- 6cm OV5647 camera cables are too short to reach the cases camera hole! One of the 15cm versions may work (TBD).
- on Lite models, the camera hole is covered, but you should be able to open it with a jewelry/plastic cutter. Photo 3 is a better view of the hole (ignore the circle around the speaker).
- the 22 pin camera connector is fragile (oops) so be careful!
- The stock Cardputer Zero firmware disables camera detection in `/boot/firmware/config.txt` (I.e. `camera_auto_detect=0`) and uses a device-tree overlay for the Sony IMX219 (`dtoverlay=imx219`).
- To support other cameras, comment out the Sony overlay, then add an overlay for the camera you do have. For example:
- `dtoverlay=ov5647` for the OV5647
- `dtoverlay=ov5647,vcm` for the autofocus version
- Reboot and run `rpicam-hello --list-cameras` or start the camera app to see if it worked.
- IMPORTANT: The camera will not work it `GPU_MEM` is set to 16 (MB)! For the OV5647 had to bump mine to 32 (MB). There may be a more specific lower value that works. If `rpicam-hello` tells you your platform is unknown, this is a sign your GPU_MEM is misconfigured.
(Side note: I'm not actually sure if GPU_MEM=16 is even a legal value, regardless of camera. That's just the lowest value I've felt comfortable trying)
- I didn't think to test if the autofocus was supported by the Camera app. I would check, but I don't want to risk damaging my 22 pin connector until my longer cable camera arrives.
r/CardPuter • u/griffog • 1d ago
Arrived yesterday and delighted with it so far. I even scored two CC11010's in the box alongside the Lora Hat 😎 I've got a ADV so that will come in handy.
Love the look of the translucent case but man is it hard to read the labels. I may have to swap over to the white ones and hope that helps, has anyone else done that yet?
r/CardPuter • u/turohith • 1d ago
r/CardPuter • u/scottjl • 21h ago
Took me a little bit of digging to find this, can't believe it isn't posted front-and-center for everyone. But the M5 Imager application will pull down the latest image release from M5 (which includes the camera fixes) and write it out to your SD card. Worked great for me. Whatever came on my card wasn't the latest and had the camera bug.
r/CardPuter • u/ArtIntrepid7323 • 1d ago
I just found out that my brand-new M5Stack Cardputer Zero was rejected by Brazilian customs.
No clear explanation. No opportunity to provide additional documentation. No chance to resolve the issue or pay any additional taxes if necessary. Nothing.
The official Brazilian Federal Revenue system already shows "Return in Progress / Customs Declaration Cancelled."
And the most frustrating part? I had already paid the import taxes when I placed my order!
This is the kind of thing that makes me feel like we live in a fake democracy. In my opinion, this is exactly the sort of government overreach we keep seeing under left-wing administrations. Endless bureaucracy, arbitrary decisions, and ordinary people paying the price.
M5Stack, unfortunately, I believe you're going to face serious problems shipping these devices to Brazil.
And that genuinely makes me sad.
I was incredibly excited about receiving my Cardputer Zero. I had been following the shipment every single day, looking forward to finally getting my hands on it.
Now, all that excitement has turned into frustration.
Sometimes it's genuinely depressing to live in a country where something as simple as buying a small electronic development device from another country can become such a nightmare.
Has anyone else in Brazil experienced this with M5Stack products? Were you able to find out why customs rejected your shipment?
r/CardPuter • u/3D_Kiwil • 1d ago
I got my CardputerZero Lite recently. It’s a really nice little device, but as some of you have already pointed out, the stock image isn’t optimized yet. Out of the box, it was using about 210 MB of the 384 MB of RAM Linux can see, which doesn’t leave much headroom on a 512 MB board.
The stock image is basically Raspberry Pi OS with desktop, so a lot of stuff is installed and running that makes no sense on a 320×170 screen with a keyboard. I wrote a script that fixes the main offenders:
Reduces gpu_mem from 128 MB to 16 MB. The Lite has no camera, so there’s no reason to reserve 128 MB for the GPU. With KMS the display doesn’t need it, and the CMA is still there for the graphics stack. This alone gives back ~112 MB of RAM that Linux can use.
Disables unneeded services (lightdm, wayvnc, triggerhappy, ModemManager, rpcbind, wait-online services, apt-daily timers, etc.).
Sets up zram instead of the swapfile on the SD card.
Cuts SD card writes (noatime, /tmp in RAM, volatile journal).
Results:
Available RAM: 384 MB → 463 MB
Idle RAM usage: ~210 MB → ~130 MB
Things worth knowing:
Bluetooth, HDMI, Wi-Fi, SSH and audio are left alone.
In config.txt, only the gpu_mem line is touched. Overlays (display, keyboard, IR, etc.) stay as they are.
It has a --dry-run mode to see what it would do, and a --revert option that restores everything from backups.
Every option is configurable (--gpu-mem N, --no-avahi, --no-zram, --purge...).
If you have the standard model with the camera, don’t use the default gpu_mem=16 without testing the camera first (use --keep-gpu-mem or a higher value).
I’ve only tested it on my own unit, so use --dry-run first and keep a backup of your SD card. Feedback welcome, especially if someone with the camera model can tell me what gpu_mem value works for them.
Script: https://gist.github.com/TheKiwil/ae8c44e28ef582e66c51a45ad962089d
r/CardPuter • u/RedditAccount101010 • 23h ago
Did some more work on my Zig lang demoscene Cardputer Adv project over the weekend
r/CardPuter • u/nits3w • 20h ago
I apologize if this is a dumb question, but there are several utilities in Bruce that fail to run because a sudo password hasn't been entered. For the life of me, I can't find a place to enter it. I was trying to mess with the wigle wardriving, evil portal, etc. Opening the 'terminal' doesn't ever get me to a usable terminal.
The other fun thing with Bruce, is you can't scroll up easily to view the full message if something fails... if you try, it just keeps returning to the bottom immediately. I might be better off submitting an issue on the github page, but figured I'd see if anyone in the community had any advice.
Cheers!
r/CardPuter • u/Mmmmmmmoi • 1d ago
Anyone else notice this? I thought this was just a speaker, but the back-right side of my device gets unusually warm.
EDIT: Disconnecting helped, but I now have no audio. 🤷
Assuming my device isn't an outlier, it might be worth benchmarking idle battery life with and without the speaker connected. Idling for about an hour yesterday, my device was uncomfortably warm. 🤔
r/CardPuter • u/solit0n • 1d ago
I was lucky enough to be one of the early backers and got my Cardputer Zero in one of the first batches they sent out. I realized that there were no meshtastic client apps optimized for the zero, so I built one myself.
It uses the official meshtasticd daemon as a backend, so we can always be up-to-date on the latest features. A background service allows you to keep running meshzero at all times, so you never miss a message. I spent extra time making sure the UI was intuitive and easy to use.
I have a few features on the roadmap such as supporting multiple devices, tapbacks, and a few other items. My goal is to eventually extend the client beyond just Meshtastic and support other mesh services like Meshcore.
What you need:
Cardputer Zero
Cap Lora 1262 module
I'd love your thoughts, so give it a try!