r/CarAV • • 37m ago

Build Log MY NEW SQL BUILD(woofer)

Post image
3 Upvotes

Hello fellow car audio nerds. I have forever wanted a JLW7. But would want to do it right if so. Can’t justify the price so I looked for alternatives. Ended up buying an SQL-12 on a restock. Then it sat for 2 weeks until I cashed in some inspire points at work and got a JL AUDIO amplifier to go with. That is on it’s way. Now I need a box. Finally got that ordered and on it’s way as well. Along with the amp, i got the Micro Epicenter Pro for a new LOC/bass control of the lower frequencies. Topped it all off with a 4 gauge OFC amp kit from kicker along with the proper recommended in line fuse size.

All will be delivered before thanksgiving. So I will be installing in my work vehicle (2024 Equinox) which currently has a 10” kicker 150rms sub. Can’t wait for the upgrade. STAY TUNED for post of final build!!

*at the end, I was not far off of the price of a 8” w7. But it would have been powered at 375 rms vs this 12” at 1000rms. We will see if I regret it or should have went with 8W7 to begin with.


r/CarAV • • 46m ago

General Mini Jeep Sound System Speakers Amp Crazy Loud Sound Test!

0 Upvotes

Just enjoying life and music.


r/CarAV • • 1h ago

Tech Support System update advice

1 Upvotes

For the last 4 years we have been running a Bluetooth receiver through a RCA volume control to a 4 channel amp running 1inch tweeters and 4inch speakers and a 8inch low profile sub/amp. the rca runs through a 7band Eq. because we travel so much we want An android auto/car play system. while there we want to upgrade the 4inch speakers to either 5.25 or 6. 5.25 would fit the original speaker holes, would they be enough to bring back the loss we are having with the 4inches? if we move to 6inches we would need to move them into the doors which is not ideal but id hate to waste time with the 5.25 speakers.

any advice on installing on a basically blank dashboard, its an old landrover defender so there is truly nothing in the dash. I plant on machining and 3d printing a housing

ive been recommended a pioneer DMH-AP6650BT 9inch unit


r/CarAV • • 1h ago

Tech Support Hifonics Zeus zxx2400.1d

Post image
1 Upvotes

I had it tuned and working well no bass added from HU. Decided I wanted to hook up the bass knob. Came with it. Now zero bass unless I max out at the HU multimetered connections everything meters out in spec in side. Still can’t figure out the issue. Subs will move and put out bass verified ohm on those.


r/CarAV • • 2h ago

Tech Support Outdated Kenwood KDC-X702 can't connect to my android phone via USB

2 Upvotes

I just bought a truck that has this mid 2010s kenwood single din receiver in it. The auxiliary port is in the back instead of the front plate, which I need for music sources. However, USB 1 and 2 have cords coming out the back of the dash and are accessible to me. I plugged in my pixel 9 XL pro with android 17 and a USB to type C cable, and then the stereo says "unsupported device". A pop up on my phone tells me to install a Kenwood music app, but when I click "view", it takes me to the play store with an "item not found". I can't find an old apk file of this app online either.

Yet, usb source mode works with my brother's new iPhone and the same USB C cable. He can play music like it's auxiliary.

I can't remove the dash at the moment, I don't have tools. How can I trick the USB source to support my modern device?


r/CarAV • • 2h ago

Tech Support Any ideas about how I can get international radio stations in this 2007 Hyundai, besides just hooking my phone up to the audio jack?

Post image
0 Upvotes

I want to play French or Euro/international music / radio stations, music in my 'new car', this is the setup.

I guess I could get an iphone to audio jack adapter, any other ideas?

It does have the SirusXM symbol so I think I could get French / German xm stations, though I'd like to avoid paying for it if possible.


r/CarAV • • 2h ago

Build Log 2023 4Runner- Helix, Morel, Si, Soundigital

Thumbnail
gallery
8 Upvotes

Hi all,

I completed an install on my 4Runner. Thought I'd post a few pictures in case there were other 4Runner owners thinking of upgrading. I may redo or pay someone to redo the mid/tweeter install to get a more polished/ finished look but therwise I'm happy with the install and the system sounds amazing (after being tuned by a local tuner).

I use my 4Runner for work, camping, taking the dogs around etc, so the amps had to go under the seats and any subwoofer had to take up as little space as possible. I wanted a sub with decent output so, to fit the depth requirement, this meant being formed into the side, similar to what I did to a 350z years ago. Luckily, I found a guy who was parting out the system in his 4Runner and had almost exactly what I wanted. That plus some other items from him made this install much easier than it would have been without them.

Main amp: Helix P Six DPS Ultimate
Sub amp: Soundigital XP1600.1. Sub is a Stereo Integrity SQL-12
Front stage: Morel Elate Carbon Pro for mid/ tweeter. Supremo SW9 in the doors- custom grills.
Source is the stock non-JBL head unit and using my iPhone through carplay.

Any questions, feel free to ask.


r/CarAV • • 2h ago

Discussion Install on old bus for customer

Thumbnail
gallery
2 Upvotes

I’m really struggling to find information on this g series bus and customer is being a little difficult (might not be getting a response if it keeps up) but if he starts helping me I’d like to have some information. I need a radio wiring diagram and how the speakers come out. If anyone has any sort of information that would be greatly appreciated


r/CarAV • • 3h ago

Recommendations Need car stereo antenna adapter recommendation

1 Upvotes

I purchased a car stereo from a 2006 Saturn Vue with plans to put it in my car. I was dumbfounded when I didn't find a standard Motorola antenna port on the back of the unit. I'm trying to search online for an adapter that will convert from the Motorola male plug that the car currently has, to the port on the back of the stereo. All I'm finding online so far would convert from the weird style female to the male Motorola.


r/CarAV • • 5h ago

Tech Support Need help on M21 connection for Car Audio

Thumbnail reddit.com
1 Upvotes

r/CarAV • • 8h ago

Tech Support How to get rid of AUX hissing?

2 Upvotes

When I plug anything into my car’s aux it makes a continuous hissing sound.

I’ve tried -
Bluetooth Adapters
aux to usb c cords
Ground loop isolator
Replaced the aux port

It hisses with anything connected to the aux.

This is a 2010 Accord sedan.

Can someone help me get rid of this hissing sound?
Feel free to ask question’s


r/CarAV • • 9h ago

Build Log Head unit and speaker replacement for the old Lancia

Thumbnail
gallery
2 Upvotes

Budget-friendly parts list:
- used Pioneer DEH-P3500MP (the 1st P in the model name means the head unit has an expansion port in the back);
- Bluetooth module for Pioneer expansion ports;
- frontstage (mounted inside the dashboard): Audison APX4;
- rear deck speakers: Phonocar Evolution 02616 (they have silk-dome tweeters and I am impressed by their sound, especially for the price);
- grills for the rear speakers.

I also had to make new flanges out of pine wood in order to install the Phonocars, because the factory flanges were unusable.

One of the coolest bits is that I preserved the period-correct looks of the interior, while also adding the Bluetooth capability to a head unit from 2003! The speaker selection also turned out to be a good one. Sound is full, balanced and natural.

The only problem I am currently facing is a Bluetooth hiss, but it only occurs when the phone is actively playing something. I was able to somehow negate it by bumping the volume on the phone to 100% then lower the volume on the head unit. And then I made a custom EQ that targeted the frequency of the hiss. It’s acceptably silent now, but any ideas on how to eliminate it completely are welcome.


r/CarAV • • 12h ago

Tech Support BMW bypass harness for amp problems

1 Upvotes

As many of us with convertibles have endured water in the trunk. I have replaced my amp with a used one and I purchased a go-around with a bypass asd harness. The vehicle is a 428i convertible 2014 model year. The first harness I purchased from Technics seller did not fit and they will Clueless to what the problem was. Rather than try a used ASD amp I want to try another harness from perhaps another company. Has anyone had good results it's supposed to be a simple Plug and Play but between confusing information or vendor resellers lack of knowledge it's more difficult than it should be. I'm looking for new ideas thank you


r/CarAV • • 13h ago

Tech Support How to handle Bluetooth hiss

1 Upvotes

So I've been setting up a decent system in my old school golf and have run into this horrible hiss when any head unit is in Bluetooth mode. My current head unit (Kenwood kdc-x305) started the problem, so I tested a couple more radios for the same issue. Every single radio I've hooked up has ended with hiss being obviously present, I've tried different Bluetooth devices with no luck as well. If I set any of the radios to cd or USB the hiss basically disappears, and after doing a little research it's looking like just cheap Bluetooth modules in the head units causing bad signal to noise ratios. I've tried adjusting my gain, when I turn it down to not hear the hiss then the music is simply not loud enough. I have also gone through the process of making sure that this hiss is from the head unit side of things, including trying multiple amps, wiring the grounds all together in a shared clean spot and then even adding an accessory 0 gauge wire directly to the battery. I'm using a set of morel Maximo 6 mkii and have been told maybe the tweeters are just too sensitive, but that just doesn't make sense to me, because if I were to put less sensitive tweeters in I'd just have to turn the volume up more which would introduce more static? I'm just looking for some ideas or information from people who have been down this rabbit hole.


r/CarAV • • 13h ago

Tech Support Unhooked four channel now have no audio.

Post image
6 Upvotes

I sold my four channel amp, and after I unhooked it, the speakers are not working. I understand that I will have to rewire it to the head unit. I have somewhat of an idea of what I am looking for, but not sure what to do to rewire it. Do you have any advice?

I had a JLRD 400/4 and JLRD 500/1 amp
I have two 6 x 9, four 6.5, two Tweeters all Focal
I sold the amps and two 12in Alpine type S.

These speakers were professionally installed about seven years ago. Do you think it would be worth it trying to recover the front speakers? Keeping in mind they are about seven years old and some of them are just about shot.

I am trading in the car at the end of the week.


r/CarAV • • 13h ago

Tech Support Need help selecting speakers

Thumbnail reddit.com
1 Upvotes

Looking for recommendations for front stage speakers for my 2022 Yukon. I want an SQ setup with clean, clear vocals and crisp sound. What do you suggest if I'm running active? 6x9 or 6.5


r/CarAV • • 13h ago

Tech Support Pioneer DEH-P7700MP Help

Thumbnail
gallery
1 Upvotes

Aux and AM/FM are working normally, but the CD player isn’t working properly. It is completely inaudible at low volume and barley audible(and a bit distorted and crackly) at max volume. This is my first time doing car audio, it is a 2001 Mazda Miata(non-Bose radio). Does my wiring look correct? I’m thinking it might be an internal issue with the CD player. Any advice would be great!


r/CarAV • • 14h ago

Music/Video Creating a bass cd for the car audio community.

Thumbnail
youtube.com
0 Upvotes

Hey fellow car audio enthusiast. I am creating a bass cd for the audio community. Let me know what you think.


r/CarAV • • 14h ago

Discussion How to get more bass out my dual 12s

4 Upvotes

Just finished installing my audio system in my car and it sounds great just was hoping for more bass. Not very punchy and missing some low bass. Gains are set right. LPF at 80hz. Have options for bass boots on my lc5ipro and kicker mono amp. Eqs are currently all flat. What’s the best way to maximize and get more bass. Thanks


r/CarAV • • 14h ago

Tech Support from the collection...

Post image
5 Upvotes

r/CarAV • • 14h ago

Discussion Aftermarket wireless carplay hardwire

Thumbnail
lamtto.com
1 Upvotes

r/CarAV • • 15h ago

Discussion mix and matching component speakers

1 Upvotes

hello, I'm currently running a component set of rainbow audio EL-C260S but I'm thinking of swapping the woofer to an audison prima AP 6.5.

will this be okay? I'm gonna reuse the crossover from the rainbow components.


r/CarAV • • 15h ago

Recommendations Full Audio Setup Overhaul

1 Upvotes

I’ve got a 1990 Chevy Astro, currently its got an aftermarket Dual XD18BT radio and 6 speakers in the cabin (2 dash, 2 d-pillar, 2 rear cargo doors), for one I’m not sure if the 5th and 6th speakers that were added aftermarket are wired in parallel with the cargo doors ones or if they are wired to an external amp, second of all, I want to know your guys’ suggestions on what I should get for doing a setup where I have the 6 speakers wired properly as well as 4 subs somewhere in the back, because I don’t want to rig everything up improperly


r/CarAV • • 16h ago

Recommendations Diamond subs info?

Thumbnail
gallery
2 Upvotes

Found these collecting dust. Anybody know what model these are? Trying to figure out what amp I should buy