r/CNCmachining • • 9h ago

Brass threaded inserts for moulded parts: what we need to quote from a drawing

1 Upvotes

I work with Meltech Precision, a CNC turning supplier in Jamnagar, India. We make brass threaded inserts for moulded parts, including CPVC and UPVC fittings.

If you’re sourcing an insert, include the thread size and pitch, outside profile, brass grade, and the dimensions that control fit. It also helps to show the mating screw and call out whether the insert is moulded in or installed afterward. Include the order quantity and any inspection requirements so the shop can quote the right scope.

If you’re sourcing this type of part, our company profile has the website and enquiry details. For shops that quote these parts, which drawing detail most often needs a follow-up?


r/CNCmachining • • 20h ago

Vai trò của tốc độ trục chính và hệ điều khiển trong gia công CNC

1 Upvotes

Trong gia công CNC, tốc độ trục chính và hệ điều khiển là hai yếu tố quan trọng ảnh hưởng đến hiệu quả vận hành và chất lượng sản phẩm.

1. Tốc độ trục chính ảnh hưởng đến quá trình cắt

Tốc độ trục chính được tính bằng số vòng quay mỗi phút (rpm). Thông số này cần phù hợp với đường kính dao, vật liệu phôi và phương pháp gia công.

Tốc độ quay quá cao hoặc quá thấp so với điều kiện cắt đều có thể ảnh hưởng đến chất lượng bề mặt và tuổi thọ dao. Vì vậy, doanh nghiệp không nên chỉ đánh giá máy dựa trên tốc độ trục chính tối đa mà cần xem xét cả công suất và mô-men xoắn.

2. Vai trò của hệ điều khiển CNC

Hệ điều khiển tiếp nhận chương trình gia công và điều phối chuyển động của các trục. Những chức năng cơ bản gồm:

  • Xử lý chương trình gia công.

  • Điều khiển tốc độ chạy dao.

  • Kiểm soát chuyển động các trục tọa độ.

  • Điều khiển tốc độ trục chính.

  • Quản lý các chức năng thay dao và vận hành.

Khả năng xử lý chương trình và kiểm soát chuyển động có ý nghĩa quan trọng khi gia công các chi tiết có đường chạy dao phức tạp.

3. Cần lựa chọn công nghệ phù hợp

Một máy CNC có tốc độ trục chính cao chưa chắc phù hợp với mọi nguyên công. Doanh nghiệp cần đánh giá đồng thời kết cấu máy, dải tốc độ làm việc, công suất, hệ điều khiển và yêu cầu gia công.

Các dòng máy phay đứng CNC Kitamura có nhiều cấu hình khác nhau. Một số model sử dụng hệ điều khiển Arumatik-Mi hoặc phiên bản tương ứng theo cấu hình.

Có thể tham khảo thêm danh mục máy phay đứng CNC Kitamura để tìm hiểu các lựa chọn thiết bị và thông số kỹ thuật tại đây: https://machinetools.com.vn/may-phay-cnc-dung-kitamura

Kết hợp đúng máy, dao cụ và chế độ cắt là nền tảng giúp doanh nghiệp nâng cao hiệu quả gia công CNC.

Xem thêm: https://www.linkedin.com/in/mayphaykitamura


r/CNCmachining • • 1d ago

Nothing like a freshy

Post image
2 Upvotes

r/CNCmachining • • 1d ago

CNC apps

2 Upvotes

Hey everyone!

I'm a CNC machinist, and I've been developing an Android app called CNC Pilot Pro.

I wanted to create something genuinely useful for everyday CNC machining, especially turning operations.

The app is currently in Google Play closed testing, and I'm looking for fellow machinists willing to try it and give honest feedback before its public release.

Current features:

OD/ID taper and contour calculations

Round Calculator with multiple rounded profiles

Thread Calculator

Hole PCD and Polygon Calculator

Fanuc turning G-code generation for supported contours

2D toolpath preview with limited G70/G71/G72 support

Fully offline, no account required

The app is free during testing. It's still under development, so all generated CNC programs and calculations should be verified before use on a machine.

How to join the test:

Join the Google Group: https://groups.google.com/g/cnc-pilot-pro-testers

Opt in through Google Play: https://play.google.com/apps/testing/com.cncpilot.pro

Install the Android app: https://play.google.com/store/apps/details?id=com.cncpilot.pro

Please use the same Google account for all three steps.

Google Play requires testers to remain opted in for at least 14 days. I'd appreciate it if you could keep the app installed, explore its features, and share any feedback or bugs you encounter.

I'm especially interested in feedback from people who use Fanuc turning machines, but anyone with CNC experience is welcome.

Thanks for helping an independent machinist improve this project. Every suggestion helps!


r/CNCmachining • • 1d ago

Who’s good with Fanuc and macro programming?

2 Upvotes

Long story short, I’ve got a medium sized run of parts that were water jet cut to be profiled and some bores roughed in. The part has 5 ( yes five) zero points across the part, 4 of which are on bores that the WJ roughed out. I’m using an edge finder as it’s plenty accurate for what I’m doing, better than the WJ that cut them. I can’t change anything about them before I get them so I’m stuck with this process. Instead of using a phone/calculator for every X/Y measurement, I wanted to use macro programming to do edge finding by my hand wheel and find the center of the bores using 4 points (2 per axis).

Machine is a Taiwanese imported machine from about 2004 with a fanuc Oi.

Here’s a snippet of my code,
(Edge finder is already loaded by this point)
G31
G55 G90 G0 X0 Y0 ;
G43 H400 Z1.
S1000 M3 ;
Z. 1 ;
Z-.2 ;
#101=#0 (force 101-103 to null);
#102=#0;
#103=#0;
M0(hand wheel to first X point);
#101=#5041 (set 101 to current machine X position);
M0 (hand wheel to second X point);
#102=#5041 (set 102 to current machine X position);
#103=[[#101+#102]/2] (find center of two points);
M5;
Z1.;
X#103;
#2502=#5041(set G55 X offset to current machine X position);

(Repeat for the Y axis using #101-#103, #5042 and #2602)

My issue comes in when I run through the program, it’s adding my absolute value to my machine value before storing the value in the work offset, even after moving to the new found 0 point it will add roughly the radius of the bore I found. I watched the macro page and checked the math to find things what it’s doing. A temp fix I’ve found is to replace the #2502=#5041 line with #2502=#103, adding an IF statement to make sure #103 isn’t 0. It works but I don’t feel it’s right/safe.

Anyone with more macro experience than me, I’d appreciate some insight.


r/CNCmachining • • 1d ago

Title: Need Help Generating CNC Code for a 3D Wire Bending Machine

1 Upvotes

Hello everyone,

I have a 3D Wire Bending Machine that is completely ready, including the mechanical setup.

I only need help with generating CNC code (G-code) to operate the machine.

I want to understand:

How to generate CNC/G-code for 3D wire bending.

Which software is used to convert 3D wire designs into CNC code.

How to convert a 3D model or drawing into machine-readable code.

How to control the machine axes and bending movements.

If anyone has experience with 3D wire bending machines, CNC programming, or custom machine G-code generation, please guide me.

Any help or guidance would be greatly appreciated.

Thank you!


r/CNCmachining • • 1d ago

Máy phay đứng CNC và máy phay ngang CNC khác nhau như thế nào?

Post image
0 Upvotes

Máy phay đứng CNC và máy phay ngang CNC đều được sử dụng rộng rãi trong sản xuất cơ khí. Tuy nhiên, hai dòng máy có sự khác biệt về hướng bố trí trục chính và khả năng tiếp cận chi tiết gia công.

1. Khác biệt về cấu tạo

Máy phay đứng CNC có trục chính bố trí theo phương thẳng đứng, dao cắt tiếp cận phôi từ phía trên. Trong khi đó, máy phay ngang CNC có trục chính nằm ngang, phù hợp với một số phương pháp gia công mặt bên và rãnh.

2. Khác biệt về ứng dụng

Máy phay đứng thường được sử dụng để phay mặt phẳng, gia công hốc khuôn, khoan lỗ và tạo biên dạng. Máy phay ngang có thể phù hợp với các chi tiết dạng hộp, chi tiết cần gia công nhiều mặt hoặc những nguyên công cần tận dụng hướng tiếp cận dao theo phương ngang.

3. Khả năng thoát phoi

Hướng trục chính có thể ảnh hưởng đến cách phoi thoát khỏi vùng cắt. Máy phay ngang có lợi thế trong một số nguyên công về khả năng phoi rơi khỏi khu vực gia công. Tuy nhiên, hiệu quả thực tế còn phụ thuộc vào hình dạng phôi và thiết kế hệ thống thoát phoi.

4. Nên lựa chọn dòng máy nào?

Nếu doanh nghiệp thường xuyên gia công khuôn mẫu, mặt phẳng, hốc và các chi tiết cơ khí cần tiếp cận từ phía trên, máy phay đứng CNC là phương án đáng cân nhắc.

Nếu quy trình sản xuất tập trung vào chi tiết nhiều mặt hoặc cần gia công theo phương ngang, máy phay ngang có thể phù hợp hơn.

Việc lựa chọn nên dựa trên bản vẽ, phương án gá đặt và yêu cầu sản xuất thực tế.

Với những xưởng ưu tiên gia công khuôn mẫu và chi tiết cơ khí bằng trục chính đứng, có thể tìm hiểu thêm các dòng máy và giá máy phay đứng CNC của Kitamura Nhật Bản để đối chiếu hành trình, cấu hình và khả năng đáp ứng nhu cầu sản xuất.

Không có dòng máy nào phù hợp với mọi nhu cầu. Lựa chọn đúng thiết bị cần bắt đầu từ quy trình gia công thực tế.

Xem thêm: https://www.instagram.com/mayphaykitamura/


r/CNCmachining • • 2d ago

What are these for?

Post image
1 Upvotes

r/CNCmachining • • 2d ago

Starting Out

2 Upvotes

Hello, I am graduating from college in a year. Is CNC work and precision tooling in high demand? How do you guys find work? How do you break into it?


r/CNCmachining • • 3d ago

We built a free tool that compares material prices across 26 sellers - Looking for feedback

Post image
5 Upvotes

I work for Uptool, a company that makes quoting software for machine and fab shops.

Our shops have a flow that works but they say it's time consuming and leaves them wondering if there's a better price out there.

So we built a free tool to speed that up. It's on our site:

  • You enter the alloy, piece dimensions and quantity. Click Diameter or Thickness to see the sizes it has

  • It works out how many bars or plates you'd buy from each seller that stocks it, with the kerf counted, and what each would charge

  • Add a zip and it adds shipping where it can. Ryerson's price changes with the zip too

  • 26 sellers so far, including Ryerson and Speedy Metals. Bar and plate in most metals, plus titanium and plastics. Thin on nickel alloys so far

These are website prices, so a quote from your rep can come in lower. We've spot-checked them against each seller's site but some will be off, so tell me if you catch one.

Would love some feedback from the community:

  • Would you use this, or is calling your supplier still faster?

  • Which sellers should be on it that aren't right now?

Try it here (no sign-up)

If this feels too promotional for the sub, happy to remove. Trying to sanity-check whether this is useful or "no one asked for this".


r/CNCmachining • • 3d ago

INTRO Corso completo programmazione torni CNC per principianti, da zero...

Thumbnail
youtube.com
1 Upvotes

r/CNCmachining • • 3d ago

Can't figure out Vbit cleanup CAM

Thumbnail gallery
1 Upvotes

r/CNCmachining • • 4d ago

Trying to grow my small Machine Shop

8 Upvotes

Hi everyone, relatively new here, but I have a small machine shop that focuses on Knives, such as private label knives, laser cutting Knife blanks , heat treating, and cnc machining knives for other makers and brands. I mainly CNC machine scales ( although I dont have too many jobs at the moment) and I laser cut a fair amount of knife files for customers as well as Heat Treat for my main bread bread&butter. I manage to squeeze this into a full time gig but its tough. Im really trying to expand into a small manufacturing shop for startups and prototyping but am having a hard time getting any new customers.

Heres a list of my machines and my capabilities:

-Gweike 1200 watt Metal fiber laser

-30 watt etching Fiber Laser

-Small Heat Treat Oven with -120f Cryo Freezer and Rockwell Hardness Tester

-Tormach 770m CNC Mill

-Tig welding and Mig welding

Im well versed in everything and am learning more and more on my tormach. Im trying to advertise for small manufacturing jobs and prototyping jobs and to be honest, its tough. I post on here, facebook, linkedin, instagram, and google ads. I also created, (and refining) a cool automated quoting system on my website to load your .dxf file and info and it gives you a quote ( mainly for knives, but works for other small components). Can you guys think of any other way to bring in small jobs?


r/CNCmachining • • 4d ago

Hiring CNC Machinists/Programmers 30-$50+/hour

7 Upvotes

I am looking for CNC machinists to join an Aerospace Machine Shop in Indianapolis!

Our shop floor is about to physically double in size.

On-machine programming experience and ideally precision custom, prototype and/or one-off component part manufacturing experience.

Multiple shifts / shift options available.


r/CNCmachining • • 4d ago

“You know your shop reuses blocks when…”

Post image
1 Upvotes

r/CNCmachining • • 4d ago

Search for the right shop.

Thumbnail reddit.com
1 Upvotes

r/CNCmachining • • 4d ago

Search for the right shop.

Thumbnail reddit.com
2 Upvotes

r/CNCmachining • • 4d ago

After a weekend shutdown, what do you actually check on the spindle probe before the first automatic offset?

1 Upvotes

Vendor disclosure: I'm with FrontSense (CNC probes and tool setters). No links, no pitch.

We keep seeing the same pattern on compact VMCs after a weekend or a long idle: the first automatic work offset of the shift is trusted, and only later does someone notice that the probe did not switch on cleanly, the receiver window had coolant on it, or the stylus was not fully seated.

The start-of-shift check we recommend is short. Confirm the probe turns on and that a hand trigger is seen by the control. Look at the optical or radio path and the stylus. Then measure a known feature — a ring gauge or a qualified boss — and compare it with the last recorded value before you write a new offset.

If that check is off, we would rather recalibrate than scrap the first part of the day.

What does your shop actually do on Monday morning, and is it written down anywhere the next shift can find it?


r/CNCmachining • • 5d ago

How deep do you rough a 6 inch cherry relief from a supavoxel mesh?

1 Upvotes

Machine: 2x2 hobby router, 1/4" flat for roughing, 1/16" tapered ball for finishing

Stock: 3/4" cherry

Model: small owl relief, base mesh from supavoxel, cleaned up and scaled to 6 inches in Fusion

I'm planning 0.1" depth per pass for roughing with 40% stepover, then a parallel finishing pass at 8% stepover. Total relief depth is about 0.35".

This is the first time I'm doing cherry instead of pine and I don't want to burn it or break the tapered bit. Is 0.1" per pass too greedy for a router this size, or should I be fine? What am I missing?


r/CNCmachining • • 5d ago

Rownd 5 Axis CNC: Fresatura Simultanea a 5 Assi da Banco!

Thumbnail youtube.com
0 Upvotes

r/CNCmachining • • 6d ago

Fanuc Manual Guide: Domina Tornitura Interna e Gole Senza Errori!

Thumbnail
youtube.com
1 Upvotes

r/CNCmachining • • 6d ago

How would you take the coordinates of the following point?

Post image
4 Upvotes

My teacher told me that I need to use 3 triangles in order to get it, but I have 0 idea tbh.


r/CNCmachining • • 7d ago

Best CNC machines for milling brass foil stamping dies?

Thumbnail reddit.com
1 Upvotes

r/CNCmachining • • 7d ago

#automobile #mechanic #factory #smartphone #machine #cnc

Thumbnail
youtube.com
1 Upvotes