Does anyone have any idea about the protocol used in this vehicle? Years 2012 to present? I'm sure it's a long shot. Thanks!

Hi guys. I came across a self-driving development platform hackathon for car drive-by-wire hacking https://www.pixmoving.com/move-it

Prizes and reimburse offered for the outcomes. Looks very promising and cool. Hacking include: ● Hacking of car control, both lateral and longitudinal controls, to achieve drive-by-wire ● Self-driving setup and test of 1/16 scale car powered by Raspberry Pi ● Installation and test run of self-driving software Autoware on full-sized car

The relevant skills would be a plus. Anyone interested? https://www.pixmoving.com/move-it

Does anyone know the algorithm that Chrysler/dodge uses for the seed/key sequence?

Hello, I'm looking to access the can bus on my audi a4 2013. I want to access information such as steering angle, steering angle sensor values,speed etc for my project. Does anyone have any can bus documentation pertaining to audi a4 2013?or where can I tap into the can-bus network in this car?I'm using a can bus-usb adapter to do the tapping. Thank you!

I finally got around to digging a bit more with the CBT on my 2012 Focus, and while I'm seeing a lot of activity on both CAN busses, as expected, I can't seem to get the CBT to interface with Kayak. Wireshark works, but it really sucks for filtering and seeing changes since it's just time based and doesn't separate packets by ID.

Has anyone here had any luck with something like this?

Thanks!

I'm looking simply identify parameter frame IDs for a logger, it appears the CanBus Triple will allow me to do this, is this correct? Any favorite apps for listening and logging the network packets to a file on OS X to reccomend?

I have 2x devices. One of them drops packets unit a CAN bus. The other from another vendor, listens and forwards those packets. In a truck, I understand you can just plug both into the CAN Hi and CAN low wires, which both bevices have, and it would work well. However, I need a working test bench. I have 12v power available. I expected it to be a simple thing, but I don't see anything online for a schematic. Can anyone help? It's for truck, so J1939 protocol.

I was just about to buy one and the website said there were 2 left. Then I hit add to cart and they're all gone...

Ah well, any idea as to how long until there will be more in stock?

Thanks!

just got a '15 mustang and want to get on the CAN bus. someone told me about some "new" OBDII protocols that ford is using. anybody heard of this?

Hi there,

I have a raspberry PI project which has really gotten legs and now has a fair few implementations "in the field". We have hooked up to Caterpillar and some specialist rail equipment and managed to read j1939 and also very proprietary CAN messages (rail).

I am now finding myself in a huge bind. We are trying to read data provided by a Komatsu excavator:

Komatsu PC270LC-8 Year model 2013

I recorded a burst of data and saved it for checking that it is j1939 (this is what i've been told) and that i could parse it before I mailed off the device to the other country where it is going.

BIG PROBLEM, the data makes no sense.

There is a link to the data here:

https://www.dropbox.com/s/fc18yvxod8vz87w/candata_test.txt?dl=0

Does anyone know where I can get a list of Komatsu CANbus PGN and SPN deifnitions?

Thanks in advance

The documentation is horrible for this device. I'm not a programmer but can usually figure out basic things with programming, but don't have time to figure this out.

I would like to pay somebody to write me an arduino/CanbusTriple app.

1. Listen on a certain CAN ID on single CAN bus
2. If input matches condition A, send message ABC to ID "X". 
3. If input matches condition B, send message XYZ to ID "X".  
4. Loop to #1

Let me know if you're willing to do this or have a similar template to help me work on this. And let me know how much $$$ you would like for it.

Thanks

Hey all

I'm using Windows 10 64 bit, and it seems like the new CBT app has trouble communicating with the CBT over USB. It detects it but can't read any CAN BUS data or update the firmware. I tested with win7 on another laptop and it works fine.

Anybody have the new app working with Windows 10?

I am having problems uploading my sketch onto the CanBus Triple

When i load the "blink" sketch using the "leonardo" as the board there is no problems

When i load the same sketch as the CANBUS triple as the board the IDE says An error occurred while uploading the sketch.

I used the method to install the firmware on http://forum.canb.us/topic/148/add-the-cbt-library-to-your-arduino-install-with-board-manager

I am using Arduino 1.8.0 Does anyone have any suggestions?

I am attempting to build a simple man in the middle project.

I've been out of the loop for awhile since my car's motor blew up last year. But has interest grown at all? Doesn't look like there's much progress in regards to the program or mobile apps. Anyone here own one?

Hey /r/CANBUS, not sure if it's the right place but I'm looking for some raw data from a CAN Bus. As in like data while the vehicle is in operation, steering, breaking, etc. Format doesn't really matter as long as I'm able to decode it easily.

If anyone can give me pointers it would be much appreciated.

If anyone is selling message me :)

The Developer hardware will be available soon, more info at canb.us

Hey everyone,

in the last couple of months we've build an API for doing Car Diagnostics with OBD error codes. Currently we're in the beta phase and giving out free accounts. These account will stay free, so there are no strings attached. Most important for us is your feedback on the current API; feature-requests are also very welcome.

Information on how to get access to the API can be found on our documentation site on GitHub.

Cheers, E

This is a great place for technical information on CANbus and the CANbus triple. I wanted to create a more general subreddit where people can share news, projects and anything else related to car hacking. If you have a CBT or related project we would love to hear about it! I’m also trying to put together a good list of resources for the sidebar and wiki, let me know if you have any ideas. r/carhacking

I'm looking to add a pi can to my vehicle. I was curious to see if anyone had any CAN ID'S to jump start the reverse engineering process. My vehicle has an E38 ecm. This is a GM computer.

In other words show all messages even if they always contain the same information. Currently it hides messages if the payload data is the same as last time. I would like it to behave like the Kayak application and show everything.