r/BoxModders • • Sep 11 '15

Unregulated Dual Parallel With Kill Switch Diagram

0 Upvotes

I'm making my first box mod and need some help. I want to make a dual parallel unregulated box mod with mosfet, no amp limit fuses, slider switch inside the enclosure so I can "turn off" the mod so it won't fire when the button is pushed.

I've seen diagrams for dual parallel unregulated box mods (many out there as we all know), but the ones I see have two possible issues or thinks I'm unsure about\want.

One are the fuses that limit it to 30amps or so... I don't want fuses in the mod, I want to subohm vape with no issues and I'm good with builds and battery safety so I don't feel it necessary. The other thing is in the diagrams I see with slider kill switches seem to have the slider placed between the battery and the atomizer... So when the mod is being used, mass amps are being pushed through the slider switch, which I don't think is good. I'm sure the little slider switches I have aren't rated to have that amount of current being pushed through them.

So I'm in need of a diagram that has no fuses and has the slider switch placed is a proper spot on the circuit to not risk burning it out or having any issues. I'm super green, so I want to insure it's done right..,, if someone could link me to a diagram that fits my needs, that would be amazing. Any advice would be greatly appreciated as well.


r/BoxModders • • Jan 20 '16

Smok one mini noob!

0 Upvotes

Hi anyone! Just Bought the smok one mini as just wasn't getting enough out of the shisha pens but now find myself completely clueless! Can anyone help with what sort of liquid I should be putting in this? Tried the cheap fluids that tasted nice in the under powered pens but they seem don't seem right in this mod. No matter the wattage my old flavours tend to start coughing fits! Also not sure on alot of the terminology used for box mods so sorry if this ends up in the wrong place :)


r/BoxModders • • Jan 31 '15

looking for a potentiometer that is also a push button

0 Upvotes

I have an idea to build a raptor or OKR mod with a 200 or 220 ohm pot for voltage control. I have seen potentiometers where the knob also acts as a momentary pushbutton and could be used as the firing switch. I am looking for one in a 6mm small format. Anyone tried this? Got a source? Also, I want to buy some Vishay P16 220 ohm pots, but no one outside the UK seems to sell them...why? Mouser and Digikey have them but only in every other damn rating...not 200/220

Thanks!


r/BoxModders • • Jul 23 '16

NEED HELP, SUGGESTION FOR A DAILY DRIVER BOX MOD.

0 Upvotes

OH SORCERERS OF THE REDDIT, AND WIZARDS OF VAPE I SUMMON THEEE! i need a recomendation for a daily driver mod, im looking for something good that won't break the bank. something with a good 510, pocket friendly, temp control, able to so atleast 75watts.open to double or single 18650. its kind of a toss up between evic, rx75, istick 100tc or the presa. im open to any and all sugestions


r/BoxModders • • Dec 13 '17

Mod Screen

0 Upvotes

Hey guys, I'm looking at making a custom mod (obviously) and I've done all the necessary work to get it moving forward. I'm looking for a good display for the mod, and have found one that gives most of the needed info, but is tiny and hard to read. I read through the "Pinned Post" in the hopes that it would answer this, but to no avail. Now, I realize that "good" Is a subjective term, so think about your average box and the display it has for the wattage, battery life, draw time, etc. and that's what I'm looking for. Something fairly large (greater than 9mm*5mm) to make it easily readable. Any help is greatly appreciated!


r/BoxModders • • Mar 28 '15

Where the f*** do i find a copper box?

1 Upvotes

Alright, so in the relatively near future I plan on trying to make a copper box mod, I'm choosing copper because I want to throw a patina on it and cerakote it so the patina remains semi-permanent. I really have no idea what I'm doing as far as building boxes as of yet, but I kinda figure the first step in building a box mod it to have the box. Once I can locate and purchase a copper box, then I plan on diving down into the thick of it and learning everything else. I appreciate anyone who can point me in the right direction.

Tl;dr- Where the fuck do I find a copper box to build a copper box mod.


r/BoxModders • • Aug 31 '18

I've been working on the design of this for a long time now. Thrilled to share with ya'll what I hope to be one of the final prototypes. Feedback welcome.

Thumbnail
imgur.com
1 Upvotes

r/BoxModders • • Feb 10 '16

DIY box mod parts?

1 Upvotes

Hey dudes, i own a custom box mod that i paid for from the US and it was great, but the 3d printed battery sled has warped to the point where it needs replacing. Now the button has frozen. So i'm going to build a new one. It's a series box, i'd like to build a high end parallel unit. What are the current go to parts for such a device? i really haven't been keeping up on current diy stuff.


r/BoxModders • • Feb 19 '16

Box mods

1 Upvotes

I'm looking for a nice quality box mod that will last me a while! I've herd so many good ones and I just don't know what one to get. My price range is $100


r/BoxModders • • Jun 25 '15

Replacing the negative ring on the fat daddy 510/shorted mosfet.

1 Upvotes

I was wondering if i could just replace the negative ring on my fat daddy 510 with a ring terminal and then just crimp it instead of soldering because i'm having a hell of a time trying to solder my wire from my mosfet to the negative ring that came with the fat daddy 510. Also is it possible that a mosfet can get fried? I know this is really stupid but originally when i connected my mosfet to the negative ring on my 510 there was some solder that was connecting my negative ring to my posistive pin and when i put in my batteries the first time it just sparked and i think it "broke" my mosfet. I already have a new one ordered but i was wondering if my mosfet is still usuable.


r/BoxModders • • May 10 '17

Some ideas I had for a box mod

1 Upvotes

So, I've built one box mod to far; this one.

It worked as expected and I was good with that, until I dropped it and broke some of my connections and then I fucked it up when I went into fixing it. I've ordered all new (and better suited) parts to start fresh though. So, I think I'll be able to make the exact same thing again, but in a more robust and planned out way.

Before I do though I had a few ideas that I think might make it better, but I'm not sure how to implement them. So, I was hoping to get some advice as to what I should be researching to implement them.

My first idea is to eliminate the need for wicking, dripping, and carrying around a separate bottle of juice. I want to design a mod that holds all of the juice inside of it, and just drips directly on to the coils as it's hit. I think stove top style coils would work for that part of it. But, how can I set up a system to feed the juice onto them at a rate that vapes evenly? I'm not afraid to anything complicated. Is there a way to set this up so that inhaling can cause juice to be delivered to the coils? Or, maybe I should even just set up a tiny pump that is set to drip at some specific rate? This setup, if I can design it, would probably need a different set of parts of course.

My other idea for just improving the design I had copied before. I know I could just set up the variable power version of this with just a few extra parts, but I'm totally fine with it being unregulated. With my mechanical tube mod, I've been trying to make my cotton last longer by pressing the button and releasing it successively while I hit it. It seems to work pretty okay like that. But, I don't want to have to hit the button repeatedly to do that. I would like to make it so that when the button is pressed some consecutive pulses are output to the coils. What can I use to do that? I've had a digital design class, so I'm kind of familiar with designing digital circuits in a way(more logical and less analog). Is it possible that I could use an IC like a 555 to do this? Since the power to the coils is controlled by the mosfet, is there a way to connect the 555s output to the mosfet? Then the pulses coming from the 555 can activate the mosfet. Then the outside switch can just give the 555 power. I can add a potentiometer to control the pulse rate of the 555. I think most of that I could set up pretty easily; at least the consistent pulsing of the 555, But, can a 555 drive the mosfet in the vape? Would the pulse from it have enough power to activate the mosfet ? If they weren't strong enough to do so in their basic form, would putting a capacitor between the 555 output and the mosfet take care of that?


r/BoxModders • • Mar 24 '15

Home made parallel box mod

2 Upvotes

r/BoxModders • • Feb 12 '15

Built a mosfet 18650 mod. Safe?

Thumbnail
imgur.com
2 Upvotes

r/BoxModders • • Oct 16 '15

Triple Series to Triple Parallel schematic.

2 Upvotes

Does anybody have the Triple Series to Triple Parallel schematic?


r/BoxModders • • Apr 05 '20

Can anyone convert this to a regulated mod?

Post image
2 Upvotes

r/BoxModders • • Jan 03 '15

Arduino Mini Class in the Comments on FB

Thumbnail facebook.com
3 Upvotes

r/BoxModders • • Dec 31 '14

Poop Well this outta be interesting

3 Upvotes

Here goes nothing


r/BoxModders • • Apr 12 '15

My first DIY effort, self painted.

Thumbnail
imgur.com
4 Upvotes

r/BoxModders • • Dec 31 '14

One Sexy Box Tame The Beaver

Thumbnail
facebook.com
5 Upvotes

r/BoxModders • • Aug 22 '15

Sharing a new magnetic case design

Thumbnail
youtube.com
5 Upvotes

r/BoxModders • • Jun 29 '26

Looking for a source of LIPO cells for replacement in mods.

3 Upvotes

I have various needs for Lipo cells for a couple old DNA builds and a couple replacement cells for LVE Orion II boxes. Does anyone know a source for lipo where they can be looked up by size and capacity?


r/BoxModders • • Jan 06 '15

file Voltage Drop Testing (bit.ly/voltdrop)

Thumbnail
youtube.com
7 Upvotes

r/BoxModders • • Jan 19 '15

60 watt 10a Raptor build fires continuously?

2 Upvotes

I'm seeking some advice from more experienced modders about my latest build. I started a raptor mod using the diagram and components listed here, however when the batteries are inserted it fires continuously with neither switches seeming to interrupt the circuit. Can anyone here offers some ideas as to where I may have gone wrong, thanks.


r/BoxModders • • Jan 07 '15

Let's Get Some Pics up in Here!

Thumbnail
imgur.com
8 Upvotes

r/BoxModders • • Mar 18 '16

Smok xcube2 510 connection

2 Upvotes

I was wondering which is the best 510 too replace my original one on my xcube2? The original one will not let anything screw down,but it don't look like it's stripped. So I wanna just replace it. If someone can let me know which one would work the best on it I would greatly appreciate it t.y in advance