r/Borax • u/Borax • Sep 28 '21
How to run an "acetone wash" on MDMA to remove caffeine, leftover precursors and some other impurities.
This is a repost, with some slight tweaks and tips.
Washing is a simple procedure used to separate a product from impurities which are chemically dissimilar to it. It is ideal for MDMA since the major impurities are left over from synthesis and are quite unlike MDMA itself. This procedure doesn't remove deliberate cuts like methamphetamine or amphetamine. It's really important to always use reagent tests on any drug you use, even if you think it's pure. Reagent testing immediately rules out mis-selling and mislabelling, both of which are far more dangerous than small % of impurities.
The idea of washing is that you use a solvent (acetone) which does not dissolve MDMA when cool. When heated up it will dissolve it a bit. Impurities will always dissolve a bit, so by heating MDMA in hot acetone and allowing it to cool, the MDMA releases most impurities and the impurities stay dissolved after cooling. The liquid is discarded and higher purity MDMA remains.
This process also works for amphetamine and cocaine (often cut with caffeine). It won't remove cuts like benzocaine or boric acid (common in cocaine), which are not soluble in acetone.
You will need:
Acetone can be bought easily online. Nail polish remover is sometimes made of acetone, but is usually not very pure and you're trying to remove impurities. Care should be taken as it will melt and discolour many plastics. It is highly flammable, and although small amounts are harmless, the vapour will give you a headache. Ventilate the room or work outside.
MDMA can be purchased from your local chemical supply house, with the appropriate government licenses.
Filter paper - coffee filters are available from the supermarket.
A heat source which is not a source of ignition.
Grind up your MDMA to a fine powder.
Add some acetone to a beaker with 2-3 grains of sand. The sand prevents sudden boiling (known as "bumping").
Heat some acetone in a beaker until it is just short of boiling, then remove from the heat. You will need approximately 40mls of acetone for each gram of MDMA.
Add the MDMA powder to the acetone and stir to encourage dissolution.
Return the acetone to the heat until the first sign of bubbles, then remove it quickly.
The MDMA will not dissolve completely, but this is fine. If you have ground it well enough the impurities will be removed regardless.
Place cling-film over the beaker and leave somewhere it can't be knocked over. Once at room temperature, move to the beaker to the freezer.
Once cold, pour the acetone over a piece of filter paper and collect the crystals/powder. Collect the acetone.
Place your new MDMA in a safe place. Place the acetone in an open container and leave it in a breezy place to evaporate.
Collect the MDMA left from the evaporated acetone and repeat steps 1-7.
You can use anhydrous acetone if you have it. Using anhydrous acetone you should add 1-2 % of any alcohol in the first step to ensure you have some solubility. For the second step you can use pure anhydrous but should grind the dirty MDMA.
Making actual crystals is a bit of a dark art but to get some chunky crystals at the end, dissolve in butanone:methanol 75:25 and evaporate as slowly as possible. For more beautiful, but more fragile crystals you can evaporate as slowly as possible from pure methanol or distilled water.
Extra points and tips
The amount of acetone doesn't need to be exact. You can use 10ml per gram if you're happy with a less effective purification (since more MDMA particles will stay solid and not release impurities trapped in them.)
If you're trying to do larger amounts, consider looking up how to do a "recrystallisation". This is where you use a solvent that fully dissolves the MDMA when hot. This means grinding can be less thorough. You will lose a bit more material into the liquid. Use 5-10% methanol in acetone for this.
If you don't have good temperature control under 100*C then use a double-boiler.
A hair dryer can be used for heating small amounts, but getting it hot enough to boil is not really possible because the heat transfer is bad. You will need to find a loose-fitting lid for your container to reduce evaporation.. Only use this if your other choice is a fire risk.
You can use a medical face mask (the blue/white kind) as a filter if you can't get coffee filters, however you will probably find it traps and absorbs a bit more material.
The less you use, the more losses you will have from slight solubility in acetone and soaking in to filter paper etc.
However, you should still start with a small batch first, just to get some experience with the process.