r/BmwTech • • Jun 25 '26

BMWTech meme pic update

Post image
570 Upvotes

It’s funny, and we like it, but it’s getting a bit much now. Especially when many of you are using it to say an engine is screwed without any other diagnostic work or you post it with ZERO follow up or additional tech info.

Moving forward, we are going to remove them unless you’ve also provided detailed list of things to check or at the minimum asking pertinent questions to a post.

This is BMWTech, and while we like to have fun we also want to help out with actual info to people who need it instead of just responding with a meme and hoping users can figure it out.


r/BmwTech • • Feb 13 '14

Welcome to BMWtech

323 Upvotes

Hello fellow enthusiast! This is a subreddit dedicated to DIY-ers. Here, i would like for other BMW owners to provide help to the redditors that need it. We all love our cars but we also know that things can fail.

Many of us like to fix our cars ourselves to eliminate high mechanic bills and I hope that this subreddit can help.

There are many forums on the web but i feel as though reddit could band together and have its own.

Welcome again, and happy DIY-ing!


r/BmwTech • • 3h ago

E60 sunken Lift point?

Post image
4 Upvotes

Pretty much title? Lifted up my E61 and jackpoint sunk towards outside of car, my guess is its bent inside, anyone have similar experience? Overall car doesnt have much rust as much i can see from below. How bad is it?


r/BmwTech • • 3m ago

Knocking or no?

2 Upvotes

Check engine light came on at the tail end of a 3.5 hour trip and put me in limp mode. Cant tell if theres a slight knock or not? Fwiw the light went back off again today


r/BmwTech • • 26m ago

BMW N20 Oil Pickup Compatibility – F15 X5 vs F36 428i xDrive

Thumbnail
gallery
1 Upvotes

Hi everyone!
I’m replacing the engine in my 2014 BMW 428i xDrive (F36) with a brand-new N20 engine originally intended for an F15 X5 28i xDrive.
The X5 oil pan didn’t fit, so I reused my original F36 oil pan but kept the X5 oil pickup tube.
Part numbers:
● X5 pickup: 11417643254
● F36 pickup: 11417603574
Both pickups look almost identical, except the X5 version has an extra plastic tab on the edge of the pickup screen.
The oil pan bolted on without any resistance.
My question: Could that extra tab interfere with the F36 oil pan’s internal baffle or affect oil pickup clearance? Has anyone compared these two parts or used this combination before?
I’m looking for actual mechanical compatibility, not just catalog fitment.
Photos attached. Any technical insight would be greatly appreciated!


r/BmwTech • • 9h ago

Customers BMW might need to get towed no

Post image
5 Upvotes

Customers car might need to get towed

This is bad. We detailed a bmw 3 series today and did an excellent job. The client was super happy with the results and paid us 215 for the full detail. Once we got the money we packed up our things and left. And about 30 minutes later I get a call from her asking if we did anything to her parking brake. I responded with “no, we may have bumped the parking brake but usually we don’t tamper with any electronics in the car”. She then continues trying to release the parking brake for another 30 minutes and then calls me again. My business partner and I came back to the job site and tried to release it ourselves and ended up seeing this. The car will not move and is parked in-front of their garage. I’m afraid we may have damaged some of the electrical components within the parking brake and will now no longer work. I don’t know what to do for my client if it doesn’t fix itself by tomorrow I think I will give her the 215 bucks back and have it towed. Any ideas or solutions for this problem? We have an LLC but we are not insured.


r/BmwTech • • 1h ago

$3,300 for a lithium dual storage battery replacement?

1 Upvotes

BMW x5 xdrive50i everywhere I see online in forums is around $1000-$2000. This seems high but wanted to check with anyone on here if this seems about right these days considering parts and labor and an actual BMW dealer/service center.


r/BmwTech • • 1h ago

G30 540i coolant leak

Post image
1 Upvotes

what seems to be my upper radiator hose seems to be cracked and theres a loss of pressure in the hose but im not sure why my coolant looks beige and crusty/pasty and is that concerning


r/BmwTech • • 1h ago

BMW M140i add OEM rear camera is it I-CAM or TRSVC?

1 Upvotes

Hi all, I’m wanting to add an oem rear camera to me bmw m140i 2018, shadow edition.

How do I know if it is an I-CAM or TRSVC?

My car was manufactured December 2018, it has rear parking sensors and Pro Nav from factory.

Is anyone able to provide the parts required / parts number.

Kind regards


r/BmwTech • • 1h ago

F83 HVAC replacement order of operations

1 Upvotes

My compressor gave up the ghost and had the shiny black death goo and I'm in the process of getting it all back together. So far I've pulled the compressor, condensor, and TXV (replacing with new) and flushed the lines and evaporator. Now it's time for me to start putting stuff back and I need some help with the order of operations. Here's my plan:

  1. install new TXV

  2. install new condenser but do not unplug refrigerant ports

  3. drain comp of shipping oil (237ml)

  4. fill comp with whole-system oil charge (150ml from FSM)

  5. spin compressor 8-10 full revolutions with pulley facing down (priming procedure from manufacturer)

  6. bolt compressor on

  7. replace all o-rings

  8. connect all lines

  9. pull vacuum for > 1 hour to confirm no leaks

  10. fill half charge of r134

  11. run system per FSM procedure

  12. add balance of r134 charge

Does this sound right? I have two uncertainties I hope y'all can clear up for me:

a) not sure if I should coat the o-rings in PAG oil prior to installation. The engineer in me says yes but I'm new to HVAC

b) not sure if the vacuum pump will try to draw out the oil. Should I add it after I vacuum the air out of the lines?

Thanks in advance!


r/BmwTech • • 1d ago

Magneti Marelli is making an aluminum oil filter housing for the B48 sold on FCP.

Post image
70 Upvotes

I know the general consensus is that OEM is best, and there have been problems out of off-brand manufacturers making aluminum oil filter housings for this engine. But Magneti Marelli is OEM manufacturer. What do you think? I haven’t seen this one before.


r/BmwTech • • 4h ago

softop replacement

1 Upvotes

im gonna buy a New softop for my 46, with all the lines modules, wireing, pump, etc etc etc, and the guy says its working but from the time he replaced the battery its not working anymore, u know why? tbh i dont really care, its like $100 so cheap for Europe. u have some tips and tricks for the replacement and u know how can i test it?


r/BmwTech • • 11h ago

I paid $630 for a diagnosis that found two covered repairs, one paid by BMW warranty and one by my Assurant service contract. Neither of them was billed for the diagnosis. I was.

3 Upvotes

Long post, sorry. 2015 X5 35d diesel, about 108k miles. I’ve owned it since around 55k and kept up with all the maintenance the whole time. I knew an older BMW would need money, so I bought a full MaxCare service contract (Assurant) ahead of time instead of hoping nothing would break.

In May it started losing coolant and threw an EGR valve code. My independent shop replaced the EGR valve in June. Didn’t help. Coolant kept going down and a new code showed up for low EGR flow. In August they replaced the intake flap actuator and cleaned the carbon out of the intake. Still losing coolant. At that point they told me straight up this should fall under a BMW warranty or extension and I should take it to the dealer.

So on Sept 2 I dropped it off at Peter Pan BMW with the codes from my shop. The check engine light wasn’t on that day and they saw that at check-in. My advisor, Stephen Hooper, told me diagnosis was $630, but if the EGR cooler turned out to be a warranty issue I wouldn’t pay it. Two days later he calls: no light on the dash, nothing to diagnose, come get your car. They knew that when they took it. The light came back the next day, so on Sept 8 I brought it back. Same promise, second time.

Then they called saying they’d found a valve cover gasket leak and a broken connector on the MAF sensor. I told them to go through my service contract. Almost two weeks of waiting for Assurant’s inspector, who approved the gasket. The dealer pushed me to also do a new valve cover and the MAF sensor out of pocket, about $1,900 together. I needed the car so I said ok, and on that same call Hooper told me a third time that if the EGR cooler was covered, the diagnosis was free.

It was covered. EGR flow was at 29.1%, “severe sooting, clogged,” and BMW replaced the cooler under its own extended warranty.

Sept 30, 22 days after drop-off, I go to pick it up and the $630 is on the bill. Why? “Well, you had other problems besides the EGR cooler.” Ok, but one of those other problems was paid by Assurant, so why didn’t the diagnosis go to them? Answer: the leak was “seen visually,” so it doesn’t count as diagnosis. Funny thing is, my repair order describes the $630 diagnosis as hooking up the charger, reading fault memory, and “VISUAL INSPECTION FOUND” the MAF connector and the oil puddle. So looking at it is a $630 diagnosis when I’m paying, and not a diagnosis at all when Assurant would be paying. And on the BMW side, diagnosing the EGR issue is part of what BMW pays the dealer for under that warranty program. When I kept arguing, I was told that if I didn’t pay and take the car I’d start getting charged storage. There’s no storage rate anywhere in my paperwork. I paid.

The MAF part still bugs me. They replaced it for $1,112.84 ($590 of that labor) because of code 290900, “air mass too high.” Later I found BMW’s own bulletin for that EGR warranty (SI B01 11 25), and 290900 is literally listed as a symptom of the EGR cooler failure. So is low coolant, which is how this whole thing started. No idea if anyone actually tested the sensor.

I’m not complaining about paying to keep a 12-year-old car running. I paid for the extra work. My problem is that one diagnosis turned up two covered repairs, BMW took care of theirs, Assurant took care of theirs, and the only one who paid for the diagnosis was me, the guy who was promised three times he wouldn’t. Three weeks without my car, three taxi rides back and forth, and a storage threat when I asked questions. Nobody there acted like they owed me anything once the work was done.

If you want to be sweet-talked first and then dunked in an ice bath at the register, Peter Pan BMW is your place.


r/BmwTech • • 5h ago

Weird Noise in my 2014 328i Xdrive

1 Upvotes

I just got the car and it has 149,000 miles and this noise has been throwing me off since i got it and i don’t know what it is what do i do


r/BmwTech • • 15h ago

Weird noise at 3000 to 2000 rpm on 2022 BMW 120d xDrive M Sport

5 Upvotes

Is this normal? Or if not, what is it that could cause this?


r/BmwTech • • 7h ago

Motornotlauf Problem

1 Upvotes

Bei meinem 523i habe ich seit ein paar Wochen das Problem das der Wagen immer in den notlauf schaltet. Als ich ihn ausgelesen habe kam ein Fehlercode von der Drosselklappe. Daraufhin habe ich diese ersetzt allerdings besteht das Problem immer noch. Ich habe keine Ahnung woran das liegen kann. Nach dem löschen der Fehler läuft alles super aber nach einer Weile geht er wieder in den notlauf. Eigentlich scheint auch alles normal das einzige was ich bemerkt als ich live Daten ausgelesen habe ist das der Drosselklappe 2 Winkel immer zwischen 47-50 grad schwankt und nie niedieger oder höher ist.
Falls jemand eine Idee hat oder das gleiche Problem schon mal hatte würde ich mich sehr über eine Antwort freuen.


r/BmwTech • • 7h ago

BMW E87 intermittent stall

1 Upvotes

Hey everyone, I’m chasing an intermittent stall that’s turned into a full crank/no-start on my 2006 BMW E87 116i, N45 1.6 petrol, automatic, around 181,000 km.
It originally cut out while driving like it had run out of fuel, even with about half a tank. It shifted normally when it ran. Now the starter turns the engine over but it won’t fire. I can’t hear a fuel-pump prime, and there’s sometimes clicking near the shifter with the ignition on.
Here’s a video of it starting after I managed to clear the throttle-body codes. It idled briefly in Park, then died and the throttle-body codes came right back. The half-yellow engine symbol (CC-ID 29) came up, followed by a red gearbox cog.
Codes
2CF0 (throttle valve control range) and 2B9C (DME self-test/reset) are the two engine codes still showing after my latest clear attempt. BimmerLink says “Not All Fault Codes Cleared,” so on this latest attempt I don’t know if they stayed stored or came straight back.
Earlier engine codes included 2CF1 (throttle position monitoring), 2D00 (closing-spring test), 2D03 (throttle adaptation aborted) and 2D0F (MAF signal). My basic ToolPRO reader also showed P1631 and P1637 at different points.
I’ve seen CF14–CF17 in the gearbox module for engine torque/data messages, 5E19 in DSC for engine torque control, and C90B in the junction box for powertrain CAN communication. Those weren’t listed in my latest post-clear report.
The other codes still listed are A6CF (AUC sensor), A6D1 (auxiliary water pump), 9520 (steering-wheel contact) and A670 (roof function centre sensor).
What I’ve checked so far
The previous owner had it scanned at JC Automatic. Their Launch report already showed 2CF0, 2CF1, 2D03 and 2B9C as history. The mechanic said it may need a throttle body if the fault returned. The paperwork only lists a scan check.
I removed the intake pipe and filmed the butterfly opening and returning with the ignition on and engine off. It moves, the bore looks clean and the plug looks fine. There’s a faint whine that continues briefly after lifting off the pedal. The housing has paint-marker writing that looks like a wrecker’s mark, so it may have been replaced before. I haven’t run a commanded throttle test or compared requested versus actual position.
I pulled the DME to inspect it. It looks like it may have been replaced before, and there was no visible water or moisture in the DME box.
BimmerLink sometimes misses Engine Electronics or loses connection while clearing codes. I tried a second Android phone with the same adapter and got similar behaviour. On the latest attempts it showed 205–222 rpm while cranking at 11.1–11.2 V. I saw a brief reading in the 9 V range on a different attempt, but haven’t confirmed that at the battery posts with a meter. The battery was originally at 11.4 V and read 12.72 V at rest after charging.
I found standing water in the boot side pockets and soaked underlay under the rear seat. The tops of the tank units were dusty and looked dry. I couldn’t find a separate fuel-pump controller behind either rear bolster. There’s also an old splice in the thin blue/brown Battery Safety Terminal wires, but no SRS codes on the scan.
The #40 fuel-pump fuse (20 A) looks intact when removed. I haven’t checked voltage on both tabs during cranking, measured fuel pressure, or tested the DME feeds and earths under load yet. My fuse card lists #54 and #70 for engine electronics.
Has anyone had 2CF0 and 2B9C together on an early N45 E87? I’m planning to check power at #40 while cranking, then check pump pressure or the relay command depending on what I find. If you know the fuel-pump relay and DME feed test points on the early junction box, or have seen these symptoms caused by water around the rear power distribution, I’d appreciate any pointers. I’m also keen to know what test you’d use to confirm the throttle body before buying one. Cheers.


r/BmwTech • • 1d ago

Oil Analysis- Blackstone Labs

Thumbnail
gallery
49 Upvotes

So as many of you know getting your oil tested evey oil change truly helps save you from catastrophic failure. I have 2 V10 M5s which basically every time you send the oil off your holding your breath till the results come back. I just sent off a sample from my 2008 6spd M5 after close to 3k miles but after a track day where she was on one, I just got the email with the results. Check it out.


r/BmwTech • • 17h ago

F10 caught fire near turbo

Post image
3 Upvotes

F10 528xi 2013 (N20) caught fire on some connector near the turbo. Thankfully I was just leaving the house so was able to stop the fire and disconnect the battery. What is that part? It looks like it's connected to the turbo. I cut down the wire and insulated them.


r/BmwTech • • 15h ago

2011 BMW X5 N55 – Electronic Whirring Noise After Engine Shutdown. Normal or Cause for Concern?

2 Upvotes

Looking for some insight from fellow BMW owners or technicians.
I’ve recently started noticing an electronic whirring/buzzing sound coming from my 2011 BMW X5 xDrive35i (N55) after shutting the engine off and parking.

The vehicle runs beautifully with no noticeable symptoms while driving. No warning lights, drivability issues, or anything out of the ordinary. This sound has only recently started happening.
It seems to occur after the engine is switched off, while the vehicle is parked.

Has anyone experienced something similar or have an idea what component might be making this noise? Could it be a pump, actuator, or another electronic component completing its shutdown cycle?

Appreciate any insight!


r/BmwTech • • 12h ago

07, 6 spd, sedan making whirring.

0 Upvotes

Bought this 07 328i about a month ago. Did oil change.
Completely stock. Brand new clutch. 190k miles.
Started making this noise last night, I wasn't driving hard. This morning started fine and all, went for a 10 min drive and it started to make the noise again.
Sounds like power steering but doesn't go away when I turn wheel all the way in either direction. Maybe belt?it rained a lot recently maybe belt is wet? Doesn't sound worse or better when revving either. And no check engine light. HELP!


r/BmwTech • • 14h ago

Timing chain?

1 Upvotes

r/BmwTech • • 1d ago

BMW Injector Stuck

Post image
5 Upvotes

So replacing cylinder 6 injector for an injector short circuit code. Bought the proper injector puller. As I was turning it the head of the injector snapped off leaving me with this. I soaked it in pb blaster last night and have let it sit overnight. I’m about to weld a slide hammer to it and wack it out. Unless there’s a better way. Any input or tips would be appreciated. For reference it’s a 2011 335I with the N55


r/BmwTech • • 16h ago

BMW E60 idrive screen and radio failure

1 Upvotes

Hello guys
I have a 2006 bmw 530d that I’ve slowly been tinkering away at. Sometimes my speakers would work and others times they wouldn’t, then they stopped working entirely and now my idrive screen doesn’t turn on. Idk if these are related issues or 2 seperate issues.
I just swapped an idrive screen from my 2004 530i and that screen 100% was working but won’t work in my 530d.
I haven’t dug very deep into these issues but I’ve checked fuse 34 and 18 which were both fine.
Where do I go from here and is it easier to give it to an auto electrician.