r/Bladesmith • u/m_Baywatch • 5h ago
Forged Blade 8" 52100 Cleaver
Just finished up this 52100 8" (214mm x 85mm) multi purpose cleaver commission. This is meant to be a do it all knife. Profile is a somewhat of a tall Nakiri mixed with a Gyuto.
Was taken to a near zero grind with very slight convexity. Then I put the edge on with stones - Shapton Pro - 120, 1000, 2000, Morehei 4k & 0.5 micron Diamond stop. It is hair popping.
There is some convexity forged into the blade as well to aid in cutting performance and food release (thickest point is about 1/3 the way down from the spine, but then tapers to a more flat profile in the from 1/4 of the blade.
Handle is thuya wood with buffalo horn - taken up to 1000 grit, then treated with 2 coats of Tried and True original finish.
Measurements:
52100 steel
Heat Treated to a 63HRC target, verified with files.
Edge length - 214mm
Height at heel - 85mm
Height at tip -63mm
Full distal taper
Spine thickness:
- @heel - 0.20"
- @tip - 0.048"
12mm behind the edge - taper from 0.040" to 0.031"
3mm behind the edge - 0.012" to 0.010" @ the tip