r/Blacksmith • • 2h ago

Could the branch be replicated in metal?

Thumbnail
gallery
5 Upvotes

For context - I’ve made 3 chefs’ knives, under instruction at a forge that specialises in forging experiences etc.

I enjoy the process of metalworking- it takes me back to my early days as an apprentice aircraft fitter. It all started when I got a gift voucher as a present.

I have more than enough shop bought chef knives for use in the kitchen so the last one I made I intended to make it more as a display piece.

I’d like to make a stand for it and originally thought about a minimalist approach but I recently saw this I design for a wooden stand that I like and I wondered what are the challenges to recreate the branch in metal? Importantly to note I am a noob here and got lot of help from the staff at the forge to make this knife.

Pictures of the knife manufacturer and display stand I’d like to recreate. The flat base would still be wood (probably the same as the knife handle).


r/Blacksmith • • 2h ago

My current work in progress...

Post image
21 Upvotes

Reverse gradient(?) damascus, drawn out, cut and 4 stacked, squashed on the 45⁰. Still gotta' weld it up, forfe weld it, draw it out, squash it again on the 45⁰. Then I'm probably gonna' accordian cut and open it to make a couple of small knives with it. I really wish I'd had more steel on hand when I made the initial billet, but... Oh well.

All I think about, right now, is freaking damascus, and what my next pattern's gonna' be.


r/Blacksmith • • 4h ago

Hand forged axe head

78 Upvotes

Newest axe commission heading out the door. This axe head weighs 5 pounds 5oz with a really unique grind and polish. It is hand forged from forklift tine. This thing came out super sick and can't wait to see it hung on a handle


r/Blacksmith • • 8h ago

Getting started- where to begin?

1 Upvotes

After years of watching Forged in Fire as well as lurking on subs like this as well as others, I’m looking at finally making the leap into getting started. I have a lot of questions and will try and break them down accordingly, bearing in mind that I should try and create many of my own tools, as well as my 2 year goals for this.

I want to get into making blades, starting with knives and hatchets but eventually working up to bigger projects like short swords or spears. A couple stipulations I have though:

  1. have to move every couple years, meaning every setup I have can only be semipermanent

  2. I’m looking at propane forges but I have no idea what the burn rate is like (I.e. am I going to crush multiple blue rhino canisters for 1x knife)

  3. like most folks in my country, I’m not operating with a lot of disposable income at the moment. I’m not broke but I’d like to parse out my start up costs over a couple months rather than eating several hundred/ thousand dollars at once.

Now, for the questions

  1. what tools do I need to get started and where should I look? I’m aware I’ll need a decent sized anvil, a forge, several sets of tongs, hammer(s), brushes, files, and some mechanism to put an edge on a blade (sander, grinder, etc). What else?

  2. if I’m buying tools, what brands come recommended? I see a huge push for vevor stuff lately but it’s listed on TikTok and Temu which immediately erodes my trust in it despite no experience.

  3. what are some small items used frequently, like flux? I’ve never worked in a forge but I ask this question in hopes of being prepared. To throw out an analogy, I don’t want to go camping for a week with all the right gear but forget toilet paper.

  4. what are some projects to get started with to learn the basics? I see all these badass Damascus knives and daggers being made but have no idea where to begin or what oils and acids they are using and why.

  5. where is a generally good place to gather working materials? I’ve heard flea markets and antique stores for old, good steel, but at all the antique stores I’ve hit people want crazy money for rusted hunks of shit. Have not been to flea markets though, recently moved.

Thanks for reading my post, hope to be posting some pictures soon.


r/Blacksmith • • 9h ago

Help making a shamshir cross guard like this

Post image
3 Upvotes

r/Blacksmith • • 9h ago

I think my Cat Tux wants to Forge

Thumbnail
gallery
7 Upvotes

How am I to tell him he can’t hold a Hammer?


r/Blacksmith • • 9h ago

Progress on my Bloom Iron Armour project.

Thumbnail
gallery
49 Upvotes

Originally wanted a breastplate but don’t have enough bloom iron to continue drawing out into a sheet large enough with the cracks forming.

Instead I have decided to pivot and make 1 arm out of bloom iron as I should have enough with how thick the sheet still is, and make the second out of modern made wrought iron and compare the two.

Looking forward to seeing the etched pattern on the finished arms as both should be very unique.

I’ve made a quick paper template of the arm I want so I’ll make a mild steel version to test the pattern and then do some maths to figure out how shrunk my version on the bloom piece needs to be to draw out into a 2mm thick sheet.

So far I’m 25 hours into the project excluding smelt time which is roughly another 60-80 hours with furnace prep and gathering ore.


r/Blacksmith • • 10h ago

Some hooks i made

Post image
27 Upvotes

Some plan J hook


r/Blacksmith • • 10h ago

Building a forge

2 Upvotes

Hey friends, I’m in the process of building a forge after taking a blacksmithing class. The instructor drew me out a blueprint for how to do it using an old propane tank. Everything is going great so far, however I’m getting stuck when trying to find a refractory cement.

The instructor said to find a refractory cement with a high alumina content, and I keep ending up down a rabbit hole trying to find one that isn’t over $100 (I live in the US)

After doing some calculations I only need about 15lbs of cement. The two reputable brands I keep coming across are Mizzou and Simond (tabcast-94) but they all end up costing $100+ because of shipping or having more cement than I need (40+lbs)

Any suggestions on good brands that won’t break the bank and/or are able to be purchased in smaller amounts?


r/Blacksmith • • 10h ago

Repairing a rocking chair when you are a blacksmith

Thumbnail
gallery
427 Upvotes

This is my wife's heirloom rocking chair on which the whole family was breastfed. So to prepare for our own little goblin, I was asked to fix the chair.

I replaced the broken staves with forged bars. I also made a steel band that I nailed all around the seat to reinforce it. It's far from perfect but the chair is now usable !

Cheers.


r/Blacksmith • • 11h ago

Safety questions

1 Upvotes

Hello all I really hate having to run to the Internet so much like this but after messing around with a solid fuel forge and not really being able to get it up to heat consistently I've bought a gas forge and not having dealt with propane at all I just want to make sure I'm not missing any thing . I've put the ridgidizer on it and I'm getting ready to cure it but there isn't much I can find on the interwebs about . Any thoughts would be appreciated. ......do I even need to heat it if I let it set for 24 hours?


r/Blacksmith • • 16h ago

Does anybody know where I can get railroad spikes in France?

3 Upvotes

I live in France and I’m looking for railroad spikes, unfortunately it seems that the kind people forge are only findable in the US, does anybody know where I can get some?


r/Blacksmith • • 18h ago

Can I make a nail header out of mild steel?

5 Upvotes

r/Blacksmith • • 18h ago

Need your opinion!

Thumbnail gallery
18 Upvotes

r/Blacksmith • • 20h ago

Part 2: the failed-hatchet knife got its handle and sheath — hiba wood, fitted to look like one piece of wood

Thumbnail
gallery
44 Upvotes

Following up on my last post: the double-edged knife I folded from a failed single-edged hatchet now has its handle and sheath.

Both are carved from hiba wood I had on hand. The idea was a shirasaya-style mount — handle and sheath meeting flush, so the whole thing looks like a single piece of wood.

A few notes from the making:

- I tested my homemade beeswax wax on a scrap piece first. On this pale wood it just looked dirty, so I skipped the wax entirely and finished it bare — planed, then polished with a dry cloth.

- While carving the handle, I hit a resin pocket. It was already hardened, so I left it as it is. Feels like proof that it's solid wood, not a veneer.

- The fit is friction only, no pins or cords yet.

I'm still a beginner, and the blade still needs its final sharpening. If you have a favourite finish for pale softwood sheaths, I'd love to hear it.

The making video is on my YouTube — the link is in my profile.


r/Blacksmith • • 1d ago

NKD: The absolute pinnacle of craftsmanship.

Post image
13 Upvotes

r/Blacksmith • • 1d ago

My latest experiment in solid state carbon diffusion

Thumbnail
gallery
286 Upvotes

The starting material was first refinement merchant iron in the form of wagon wheels, and some nickel welding rods to mimic meteoric iron. That that makes up the nickel bearing elements of my billet in a highly refined state. The remaining iron is 4th refined structural iron from a bridge built pretty civil war in Charleston, it is interlaced with high phosphorus iron saturating its grain lattice. I then take stack and repeat a number of times until finally twisting and welding the multi bars together. The blade is then forged 80-90% to shape, and filed the rest of the way. Carbonation is achieved in a sealed canister, containing Coke and organic materials, it's is cooked at 2,300F for 4 hours. After All of that is done I treat it as if it is modern tool steel, and have achieved a final hardness on this blade of 58 Rockwell. The guard and butt plate are made of 2nd refinement watertower iron From 1836, and some stainless steel welding rod as an experiment all twisted up and welded together. The handle is curly maple. Please tell me your thoughts, and honest opinions.


r/Blacksmith • • 1d ago

First attempt at Damascus by hand

Thumbnail
gallery
62 Upvotes

Round 1 - Didn’t get too far before gassing myself out. Should’ve started with 6 layers instead of 12, this does not move like 1/4-3/8 stock I’ve been playing with lmao I’m just glad it welded successfully my first try. (Please don’t judge my tack welding, also first time in my life doing any welding 😂)
Not horrible for being 3-4 months into blacksmithing right? Any advice for a budding smith?


r/Blacksmith • • 1d ago

Progress on the big flower

108 Upvotes

r/Blacksmith • • 1d ago

Draft inducer

Post image
2 Upvotes

Greetings,

I had to change the location of my coal forge, and I no longer have the height to create a decent draft. I have eight inch stove pipe connected to my hood. Has anyone used a draft inducer like this? They are made for wood stoves, so I imagine it would work. The product information does not talk about how many cfm they would move, though. I could use some observations or advice before I drop a couple of hundred bucks on one. Thanks in advance,


r/Blacksmith • • 1d ago

Hand forged axe normalization cycle

175 Upvotes

r/Blacksmith • • 1d ago

Hand made tool, where to buy

Thumbnail
gallery
149 Upvotes

Hey guys, looking to get some custom tools made. Specifically a set of caulking irons. They are specialized and very hard to find. Think of them as chisels to pack material into a seam on a wooden ships deck/ hull (so will be hammered, mostly by wooden mallets) I know nothing beyond the occasional Alec Steele & black bear forge video on my lunch break.

  1. What should I expect to pay

  2. How hard would something like this be to make

  3. Where can I find blacksmiths that do custom work

  4. What steel should I be thinking of using. Is something like this impossible and or too pricey to do in’s stainless.


r/Blacksmith • • 1d ago

anvil identification?

Post image
6 Upvotes

my dad gave me this anvil and told me it is our great great grandfathers and im wondering what is the origin behind it


r/Blacksmith • • 2d ago

“Scavenger”

Thumbnail
gallery
47 Upvotes

I made a vulture-inspired knife and fork set over halloween! An absolute blast of a project.

It’s all forged of mystery-mild steel, super quenched and case hardened to eh levels of hard enough.