r/BambuLab • u/Blood_Red_Volvo_850R • 15h ago
r/BambuLab • u/ozarkexpeditions • 15h ago
I Modeled This! 93 print hours later on the H3C, finally saw my vision through.
r/BambuLab • u/Particular_Ad_4613 • 1h ago
Quick Question Advice needed! H2C vs H3C
Hey guys I‘m currently printing on a P1S and im really happy with the Quality and the Printer over all -> It now has arround 2k hours of Printtime and I’m thinking about an Upgrade -> I mostly Print PLA, PETG but also some structural Parts with ABS and PETG-CF. Most of my parts are 1-2 Colors and it would be great to use PETG as Support for PLA and the other way arround for cleaner interface layers. With the P1S this takes a lot of time, why i mostly only print in one color or Material.
Ofcourse with Holiday Season coming up i will print a lot of little gifts for Friends and Family, also in multiple colors, were the H2C or H3C would be a big Upgrade.
Also the Size of the Bed is crucial for me since i often print bigger parts. Soft 2.8mm TPU is also not really a must have for me.
What printer would you guys choose? Arround 2.000€ for the H2C with Bundle or 2.500€ for the H3C
I Really like the H2C Bundle with 2 AMS Pros and the Vortex upgrade kit -> I think 2 AMS Pros are significatly better than the big AMS3 on the H3C, but the H3C is also a lot faster with mutli Color/Material.
Thanks for your help
r/BambuLab • u/FlyYouFoolyCooly • 9h ago
X Series [X1E, X1C, X2D] How I felt After getting my first 3D Printer
r/BambuLab • u/SNIPEEYE • 8h ago
Just Showing Off Print shoes from H2D by using shoeflex9075A filament
r/BambuLab • u/GravyPoo • 12h ago
Show & Tell Can you find the top surface layer lines in my CMYK print? (H2C & H3C)
I used 0.1mm layer heights on both spheres.
CMYK Sphere layer line test: https://idither.com/job?Kmyqrictw&row=9
When you click "Download 3mf" you can choose between H2C or H3C. Adjust the Support Threshold Angle to 45 degrees or they will roll off the plate!
How it works:
TL;DR = iDither.com (free) converts 3mf files and 3D files with textures into 3mf files with DwD (Dual Wall Dithering) and Top Surface Mixing (TSM) which use CMYK filaments to print any color(s).
Cyan = C
Magenta = M
Yellow = Y
White or back = K
CMY+White typically works better because CMY together can make a "black".
There is no way to make White if using CMY+Black.
CMY+Black is typically only used in models that have very little or no white areas.
iDither converts existing 3mf, glb, fbx, and obj files into DwD (Dual Wall Dithering) 3mf files.
iDither currently only supports exporting 3mf files for Snapmaker Orca, and Bambu H2C and H3C.
iDither uses an inner dithering wall combined with an outer dithering wall - and the "magic" of iDither is dithering the two walls together. All other software (to my knowledge) uses just 1 dithering wall.
The outer dithering wall is only allowed to use super dense layer combinations such as C M C M CC MM CC MM - therefore, the layer lines are basically invisible up close.
The inner wall picks up the slack for more color combinations and it's not limited to dense combinations.
Opaque filaments don't work well with DwD, because the thin outer wall layer needs to allow light to pass through to the inner wall layer.
Recommended filament set based on testing data thus far: https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-white-edition-4kg
This set has good transparency ranges (TD between 5 & 10).
Filaments that are too transparent (TD > 10) make the models look like glass (see https://www.reddit.com/r/snapmaker/s/nbASKpfCpG).
Filaments that are too opaque (TD < 5) have less color mixing and blending, and show layer lines (see https://www.reddit.com/r/snapmaker/s/N6QFGj2NwC).
Why iDither?
Converts any existing 3mf files with any number of filaments and filament colors into files that print with 4 or 5 filaments (CMYK or CMYKW). So you don't have to buy any other filament colors. If the 3mf file has 8 random filament colors - you can still print it in 4 colors with CMYK!
WYSIWYG (What you see is what you get): iDither includes calibrations for CMYK bundles for Snapmaker and Polymaker - so your actual print should always look like the print preview.
Converts 3D model files into a printable 3mf files with CMYK.
Less layer lines (DwD).
Top Surface Printing via Top Surface Mixing (TSM) in CMYK or CMYKW.
r/BambuLab • u/Vigorious • 13h ago
H3C Different take on an H3C/AMS3 desiccant solution.
Not sure if this is the right spot to post something like this, I don't use reddit often. Anyway I was looking at the printable baskets for desiccant on Makerworld, but I really hate dumping them out into a tray to dry then trying to refill the basket after. I prefer to use molecular sieve and the drying temps for it is far beyond what even PPS-CF can handle. I found a wire mesh "dishwasher" basket on Amazon that was approximately the size of the "empty slot 10” in the AMS3H and decided to take a chance on it. As you can see in the photo, it fits well, the lid tabs were pretty secure once I bent them in a bit tighter. I tried to use some 1.6-2.5mm sized beads, but the mesh was too coarse and they fell through, I found 3-5mm beads on Amazon and bought 2lbs. It holds approximately 750g of the 3-5mm 4a molecular sieve. I threaded some craft wire around the rim of the lid and body as extra insurance to keep it from opening.
Here's the products I bought that worked:
Basket- https://www.amazon.com/dp/B0H41KL114
Desiccant- https://www.amazon.com/dp/B0H1XJ98JS
r/BambuLab
•
u/Snoo_56086
•
1d ago
Bambu Studio Can’t believe I didn’t know about this!!
Print sequence by object is pure magical!!
So I’m printing 40+ poliwhirls to build my color sample library. I’ve been printing all day today and doing the plate swaps every 30min each time a print is done. Eventually I got so sick of it and was wondering how wonderful it would be if I could print 4 at a time, object by object, with no color swaps. Told this idea to ai and it told me the function is already available in Bambu studio! Tried it immediately, omg the process was so smooth, the software even showed me how to place the objects so that the finished parts won’t get knocked over by printer head. I’m not a veteran but I’ve clocked in like 1500+ hours and I can’t believe I didn’t know about this! Would’ve saved myself so much time and filament but I’m sooo glad I found out today!
r/BambuLab • u/logojojo • 16h ago
Just Showing Off Sounds like a lot of…
I modeled this guy in blender and printed it on my X2D. Hand painted but my outlines could have been better. I need a paint pen for next time.
A hint as to what’s next: “No, worse! It'll go right to your thighs! And then you’ll blow up!”
r/BambuLab • u/ikinria • 21h ago
Just Showing Off Bambu Station L drawer fits exactly a 9×12 Gridfinity grid, and 14 spools
Just found out the Bambu Station L drawer fits exactly a 9×12 Gridfinity grid.
With proper spool stoppers on top, you can fit 14 spools per drawer (2 rows of 7). They stand on edge and don’t roll when you open or close the drawer.
Files if anyone wants them: https://makerworld.com/en/models/3617522-bambu-station-l-spool-stoppers-14-per-drawer#profileId-4146587
r/BambuLab • u/DrKronoglopolos • 19h ago
H3C Printing the 0.2mm nozzle on the H3C
I printed a tiny Benchy - PLA Basic, default profile, 0.08mm layer height. I did need to use glue to keep it on the plate, I also slowed the printer down to "silent mode" just for safety.
Pretty great result I think. The "Comparison Benchy" is the standard size, printed with the 0.4mm nozzle, 0.2mm layer heights in ABS.
r/BambuLab • u/drench44 • 11h ago
I Modeled This! I made a Christmas chess set for the holidays: Santa kings, reindeer knights, elf pawns (free on MakerWorld)
Printed this whole set on my H2D for Christmas. Santa is the king, Mrs. Claus the queen, snowmen are the bishops, sitting reindeer are the knights, the rooks are towers wrapped in Christmas lights, and the pawns are elves. Everything is sized for a standard 2 inch board, so it plays like a real set.
It's red vs green in four colors of PLA. The only support is a tiny one under each reindeer's chin, already set in the file. If you don't have an AMS, there's also a one color plate with all 16 pieces of a side.
Flip any piece over and there's a snowflake under the base.
Free download here: https://makerworld.com/en/models/3619395
A candy cane board, matching checkers and a North Pole storage tube for each side are coming next. If you print one, I'd love to see it!
r/BambuLab • u/Radiance_16 • 1h ago
Quick Question Any news on the P3C?
I got my wallet ready, and I ditched the U1 sale to buy the P3C.
Is there any news/info/word about the P3C release date...? I know the reviewers already tested them out.
r/BambuLab • u/Pedro18gomes • 9m ago
General Troubleshooting/Help! Filament spools holes are too big
Good morning,
I’m using a Bambu Lab A1 with an AMS Lite.
Today, while loading my AMS Lite with three spools of LOCTATREE filament, I noticed that the spool holes are too large for the holders.
I used to use Elegoo filament, whose spools have a 54 mm inner diameter, whereas the LOCTATREE spools have a 63 mm inner diameter. This difference causes the spools to sit loosely, making them tilted and unstable.
Has anyone else experienced this issue? Is there any solution? I was thinking about 3D printing some spacer rings for each spool to fill the gap, but I'm not sure whether this is a good solution or not.
Thanks in advance!
r/BambuLab • u/ALEXISDIMOU01 • 15m ago
General Discussion Should I get ams lite or ams 2
Hello everyone. Since the sale started I was thinking about buying an ams system. I am between the ams lite or ams 2 pro. Which one should I get? I know there are vast differences from one to another, but does the price justify this (is it worth it). I have the A1, ams lite goes for 150€ and ams 2 pro goes for 220€ plus the hub that I need for to connect it to my printer and the AC adapter which is 54€ rounding it up to 274€. I want the drying feature only for tpu which I have never managed to print since I got the printer 3 months ago. Should I get ams lite and a dryer or should I go all out for the ams 2 pro.
Sorry for any typos or miss writing words.
Thank you
r/BambuLab • u/The_FrankDad • 12h ago
P Series [P1P, P1S, P2S] My heated enclosure
Me: I want a heated enclosure
Mom: we have heated enclosure at home
(Heated enclosure at home
r/BambuLab • u/Neglexis • 13h ago
Quick Question Is the H3C overkill as a first 3D printer?
A good friend of mine recently got into 3D printing and talked me into giving it a shot. He started with a more affordable Bambu himself and has been geeking out about the new H3C, so now I’m looking at it too.
I have room in my budget for the H3C if it makes sense. I’m still figuring out what I’ll enjoy printing, though, and I’d rather spend the extra money once I know I’ll get some use out of the features.
For those of you who’ve been printing for a while, what would make the H3C worth buying as a first printer? If you were starting over, would you go straight for it or get a simpler Bambu and see where the hobby takes you?
r/BambuLab • u/Cute_Assignment_9732 • 20h ago
General Discussion What are your most useful real-world prints?
Hi everyone,
I have a bit of a dilemma that I’m sure many people here have faced at some point. I’ve been thinking about buying a Bambu Lab A1, mainly as a hobby but, more importantly, for practical purposes. I’m trying to figure out whether I would actually have enough useful things to print to justify the cost.
From what I’ve seen online, a lot of 3D-printed items seem to be solutions to problems that don’t really exist, or things for which better-quality alternatives are already commercially available. I completely understand that people might print these things simply for the enjoyment of the hobby, but my main focus would be practicality and usefulness.
With that in mind, I’ve been making a list of potential uses for the printer, and I’d love to hear your ideas and see what useful things you’ve made yourselves.
So far, I’ve thought of:
Drawer organisers for my home office, shelving organisers for the pantry, and bathroom storage solutions using the Gridfinity system.
Enclosures for ESP32 sensors that I plan to eventually deploy around the house.
Stands and holders for storing things like AirPods and iPhones on my desk, as well as printing a few to give to friends.
What other genuinely useful things have you printed? I’m particularly interested in practical everyday applications rather than purely decorative prints or things that are fun to print but don’t really serve a purpose.
Thanks!
Edit: Wow these are really great suggestions! I’m going through them all and putting the ones i like the most in a doc, there’s a lot of use cases I consider useful, thank you everyone!
r/BambuLab • u/nlimitedtrance • 3h ago
General Troubleshooting/Help! Traveling with 3D Printer
Has anyone ever travelled with their printer? I have mine (X1 Carbon) in Germany which is new and I’ve struggled to sell it. It’s run 3 small things as a test. I still have the original box I’ve moved to Thailand and was thinking of taking it here on my next flight.
Any tips and suggestions are welcome. Especially if this is a super dumb idea. Or if anyone know where I can find a better place to sell it than Kleinanzeigen.
r/BambuLab • u/CreamyFarts69 • 7m ago
General Troubleshooting/Help! Filament pulled off spool, how do I remove
Noob here with X2D and AMS 2 Pro - I was printing with PLA and was hoping the auto refill would have kicked in when the spool had finished. Somehow the filament end has pulled off the tape at the end of the roll, has partially pulled through the PTFE tubes at the back and already too late to unload from the AMS.
I've paused the print and I can see it but not sure on the safest way to remove it, as it's still being held by the extruder.
Is there a correct way I can remove the remaining filament and potentially resume the print without damaging anything?
Big thanks in advance!
r/BambuLab • u/Bubbly_Lecture4102 • 23m ago
Quick Question My first multi hour print is this normal?
The base of it is a little stringy but otherwise it’s completely fine just a general question if it’s something I should expect
r/BambuLab • u/SilentYakk • 1d ago
Just Showing Off 16 colors on the H3C. Overkill, but why not?
Two AMS 2 Pros hooked up to the H3C. That's 8 colors built in, plus 8 more on the external units for prints that don't need to swap colors between the two AMS 2s.
r/BambuLab • u/One_Ad5931 • 4h ago
General Discussion Which first 3D printer to get as a beginner ? Bambu lab or any other brand ?
Hi Guys, i am based out of India, and want to get a 3D printer to prototype some elements. I am from the design industry so am well versed with 3D softwares as well though i am sure there will be a learning curve.
Now, after researching for a fair bit, Bambu lab printers seem to be the most widely chosen option because of their community support and easy to use UI/UX including their softwares.
I was thinking of getting the A1 combo. Do you guys think it is wise to get the A1 combo right now ( its three years old ) or should i wait for an upgraded model if at all its being launched. Please suggest.
Do note, the printer will be initially used as a prototyping tool for my designs and then once i get a hang of it, i might make some items for selling in my fraternity.
Thanks
r/BambuLab • u/No_Holiday7058 • 29m ago
General Troubleshooting/Help! Weird loud noise on layer ~ 1100
Hi,
I had a print going for last 16h
Woke up to this noise in the morning.
It’s on the end of each layer now.







