r/ballistics • u/MDADigital • Jan 27 '21
r/ballistics • u/notanadministration • Mar 30 '19
Reverse calculation of shooter location from bullet embedded in roof. NSFW
I would like to know if anyone has the time to calculate and share data generated based on examination of a bullet lodged in my roof. I’m confident that I could collect any data necessary from the projectile (it’s in good shape).
I consider myself fairly technically inclined with a mind for precise measurements and thorough analysis, but this sort of physics and number of variables is too much for me.
Of course, this is a pointless endeavor but would enjoy reading how the process would go if we had most of the required information (caliber, date, time, weather, angles, etc).
I would likely be willing to purchase a more appropriate tool if necessary for precision angle measurements.
The reason I come to reddit for this is that I do not have the time to spend on this practically useless information. It’s not like I need to know where it came from, because it doesn’t matter, I’m just curious to see if it can be done and with what margin of error.
Thanks!
r/ballistics • u/ObstinateFanatic • Oct 03 '13
The original Box 0' Truth NSFW
r/ballistics • u/kenneaal • Mar 06 '26
Gunshot or something else? NSFW
We're debating whether this is a .22 fired from some range, or if it was a falling icechip or similar. Those who were standing near the car are pretty convinced they heard a shot, but it could of course be the impact on the windshield.
r/ballistics • u/jumpsuitman • Nov 27 '21
What does gel tests really mean? NSFW
I feel I'm far from the first person to ask this question, but here goes;
What do the tears in 10% ordinance gel really mean in ammo testing?
How does that translate to damage in a body?
I'm still trying to understand if a .5" expanded soft point wound actually make a track a few inches in diameter in real flesh, or if underwood extreme defender truly creates a path of destruction several times it's own diameter in the body.
r/ballistics • u/FrF21 • May 17 '21
Thought experiment: How would you design the best armor piercing 12 gauge projectile? NSFW
Let's say you are tasked with designing a line of 2 3/4 inch 12 gauge ammunition whose sole purpose is to have as much armor and barrier penetration as possible while following these criteria:
At minimum must be able to penetrate Level IV ceramic and Level III+ steel armor at 50 yards.
Must have acceptable accuracy up to 50 yards.
Must not exceed maximum SAAMI spec chamber pressures.
Must not cause excessive damage to the barrel.
Must not use incredibly absurd means (ex. nuclear)
(Bonus) Create a multiple projectile version which can penetrate level IIIA soft body armor at 30 yards.
How would you go about doing this?
I would personally develop the thinnest and longest tungsten/steel rod that is shaped like an arrow. I would have a sabot that is designed encase the rod along the diameter of the smoothbore barrel which is attached to the rod at three separate junctions. A 180 grain 2.5 inch long rod that is only 5mm in diameter would have a muzzle velocity of over 3000 feet per second and incredible sectional density. Once the projectile leaves the barrel the sabot would fall off leaving a thin, long, hard, and fast projectile.
r/ballistics • u/yagarea • Feb 17 '20
New ballistics software avalible under OpenSource license NSFW
Hi, me and my classmate made software for ballistics calculations and bullet trajectory visualisation. Feel free to check it out on:
r/ballistics • u/Picasso5 • Sep 24 '25
Can someone identify these? NSFW
"The Department of Homeland Security has issued a new statement on the shooting at the Dallas Immigration and Customs Enforcement facility.
Bullet casings with “anti-ICE messages” were found on scene where a “sniper” opened fire and shot three detainees, according to DHS.
“This morning, a sniper opened fire from a nearby rooftop on a U.S. Immigration and Customs Enforcement (ICE) Dallas field office. The shooter fired indiscriminately at the ICE building, including at a van in the sallyport where the victims were shot,” it said."
r/ballistics • u/mammothtaints • Aug 19 '25
Can tansition this to a 308 bdc? This is a meant for m193 5.56 out of a 16in barrel NSFW
Im thnking of putting my burris 536 fixed 5x prism scope on my ar10 and im wondering if its feasible or is there by chance a fixed bdc magnified optic for 308/762 nato?
r/ballistics • u/[deleted] • Nov 10 '23
Caveats of the 50/200 yd Zero with Sub-20" Barrels: A Case Study in 5.56 Ballistics NSFW
Hey, y’all. I am a relatively new rifle shooter and 2A enthusiast trying to learn basic ballistics and optimize my AR-15 setup. I recently went through a lengthy but fun exercise in determining the optimal zero for my specific rifle and optic pairing. Field testing is pending for validation. Meanwhile, I hereby submit the math to y’all in hopes of receiving some feedback from more experienced shooters. I also hope it is informative to anyone else just getting into ballistics and/or AR platforms :-)
TL;DR: The 50/200 yd zero is derived from the performance of 5.56 NATO out of a 20" barrel like in the original M16. As your barrel gets shorter, you need to factor in the changing ballistics to achieve your best zero and holdovers. For me, I will be using a 36/230 yd zero with my 14.5" AR-15.
For the long version...this is my setup:
- Rifle: DDM4 V7 SLW
- Factory build: 14.5” barrel (pinned and welded flash hider to achieve 16” total length), 1:7 twist, mid-length gas system
- Ammo: PMC X-Tac 5.56 NATO, 55 gr, FMJ-BT, MV 3,120 fps, BC 0.243
- Optic: Vortex Strike Eagle 1-6x24 SFP LPVO, AR-BDC3 reticle
Let's look at the scope’s reticle. Looking at the Vortex manual, we can see that the BDC reticle in the Strike Eagle is built to match the trajectory of a specific bullet and velocity. It is tailored to a 60 gr bullet with a MV of 3,050 fps zeroed at 50/200 yd. I assume the choice of a 60 gr bullet is a compromise to keep the reticle faithful for both 55 gr M193 and 62 gr M855 cartridges. Standard atmosphere is assumed given we’re not told otherwise.

Now we get to what launched me on this project: the assumption of a 50/200 yd zero on this optic. Every AR-15 shooter "knows" that zeroing your 5.56 NATO rifle at 50 yd will give you a remarkably flat trajectory out to 200-225 yd, allowing for accurate medium range shooting without going through any mental gymnastics. It is a fantastic zero. But, if I understand correctly, it is also built on an important assumption: a 20” barrel.
We know that as we shorten an AR barrel, we lose muzzle velocity. Sonoran Desert Institute (our favorite Guntuber sponsor) provides the following estimates of MV for various AR barrel lengths:

These estimates are very close to field testing results by the guys at Classic Firearms on their video titled “How Much Does Barrel Length Affect 5.56 Bullet Velocity?” (https://www.youtube.com/watch?v=TbdNZuCvEh4). For the 14.5” barrel they specifically used a DD M4A1, very similar to my DDM4 V7 SLW. Pinned and welded flash hider, 1:7 twist. One difference that could be significant: carbine-length gas system. To preserve my sanity, I set this difference in gas system length aside and assumed “close enough” performance between the two rifles. Classic Firearms’ M4A1 clocked in at 2,763 fps. I can therefore trust Sonoran’s MV estimate of 2,750 fps as a pretty good generalization for 5.56 NATO in a 14.5” barrel. Let’s run with it.
First, I validated the reticle on my Strike Eagle by comparing the manufacturer's reported bullet drop (in the table above) to the ballistic trajectory of my PMC X-Tac 5.56 NATO at the MV of 3,120 fps that it would achieve if I was shooting out of a 20” barrel. We can see in the graph below (generated using Shooters Calculator; assuming no inclination, no wind, and standard atmosphere) that, with a typical 2.5” height over bore, we can get that nice 50/200ish yd (50/217 yd) zero that the reticle assumes. From there, our calculated bullet drop closely matches the bullet drop in the Vortex manual.


However, if I look at the same ammo shot at 2,750 fps out of my 14.5” barrel with a 50 yd zero, I can clearly see my far zero shifts significantly. It is now a 50/174 yd zero. This results in bullet drop becoming significantly different from what the scope's reticle is built for.


So, my initial conclusion/fear was that with my rifle, this LPVO was no better than a simple red dot and magnifier, since the BDC reticle lost accuracy quickly beyond 200 yd (leaving the center dot as the only useful graduation). But ballistics are neat. What if I moved my near zero from 50 yd to 36 yd? By doing so we actually achieve a 36/230 yd zero that closely matches the reticle’s bullet drop out to 400 yd, extending the usefulness of my optic.


Pretty good! But we can do even better through a little mental gymnastics. On further examining the numbers, it becomes evident that my actual bullet drop at any given distance past 450 yd matches the reticle’s bullet drop at the same distance plus 50 yd.

So, if I shoot known range at 450 yd, I can aim using the 500 yd graduation on my reticle and expect decent results. For shooting at 500 yd I go to the 550 yd graduation, for shooting 550 yd the 600 yd graduation, and for shooting 600 yd the 650 yd graduation. This makes me a happy camper knowing I can make full use of my optic to push the capabilities of my rifle. I am not shooting past 300 yd yet, but I hope to in the future.
One caveat before concluding: with the 14.5” barrel propelling the bullet at 2,750 fps at the muzzle, the bullet slows down to transonic speed (1,340 fps) at around 461 yd. This is the speed and distance where the bullet may start destabilizing because the center of pressure shifts forward as it approaches Mach 1 (aka, as it approaches the sound barrier or subsonic speed). Hopefully my barrel’s high twist ratio (1:7) and the boat-tail shape of the bullet can help it power through the transonic region a bit better until it hits the sound barrier (1116 fps) at 587 yd. Once subsonic, the bullet may start tumbling, losing accuracy (and, I would assume, penetration). I derive from this that my setup’s peak performance still resides within the 450 yd range (nice because I can use my reticle without mental gymnastics up to that range), but can still be hopeful almost out to the full 600 yd. By comparison, with our 20” barrel and 3,120 fps MV model the bullet goes transonic at 555 yd, then subsonic at 681 yd.
In conclusion, the 50/200 yd zero is most applicable to the original 20” barrel M16 platform pushing bullets at 3,120 fps. An 18” barrel likely works very well with the same zero, as the loss of muzzle velocity is not dramatic with the 2” barrel length reduction. But as you go down to 16,” 14.5,” 12.5,” or 10.5” barrels you have to do your homework. Acknowledge the loss in muzzle velocity and work out your own best battle zero and holdovers to achieve peak performance.
Ballistics are cool and I hope to learn as much as I can. If you find any error in my work please chime in! It will be to the benefit of everyone.
r/ballistics • u/jumpsuitman • Apr 15 '21
What is the main source of recoil? NSFW
A little background; I was curious about bullets produced by lehigh/underwood called "xtreme defender". They claim it produces low recoil on account of the projectile weight, yet they're among the highest velocity 9mm cartridges produced, and their lightest 68 grain +P cartridge produces as much foot pounds of force in a target as a hot .40 cal.
I haven't had the chance to personally try, and compare felt recoil myself, but is the weight of the projectile the main force that matters when it comes to felt recoil despite the energy, and the speed in which the projectile leaves the barrel?
r/ballistics • u/bp_968 • Mar 24 '21
Quick question about zeroing for multiple bullet weights NSFW
Id like to zero my AR for the round I shoot most, but id also like to work up a ballistics chart for each of the other rounds I shoot referenced from the primary rounds zero.
In other words, if im zeroed at 100 for 55gr 556 .mil loading and drop in a 77gr load, what will its drop be at 100/200/etc from that 55gr rounds zero? (rather than from the 77grs zero like the calculators typically assume)
Any suggestions for sites/apps that allow that, or ways to "hack" the functionality to accomplish the same thing that too dumb to think up?
Thanks!
r/ballistics • u/TrendingB0T • Oct 29 '20
/r/ballistics hit 1k subscribers yesterday NSFW
r/ballistics • u/krung • Nov 04 '13
What makes a caliber great? NSFW
First off, I am not trying to start at religious war, I am merely trying to gain greater insight into what properties a caliber has. I don't care if caliber A is better than B, only what type of arguments one can make for a caliber.
To limit the discussion, I think we should leave out terminal ballistics. It is interesting, but let's start a different thread for that. Still, I would like to hear about any internal ballistics arguments anyone has, as barrel life is important to some.
My own input is:
Physical – High BC for weight, high weight of projectiles in general, high case volume, special case features to optimize combustion, high MV, flat trajectory
Availability - Can you even get a firearm in this caliber? Can you get reloading equipment and components? Is the selection of projectiles broad? Availability of desired twist rate (my newest riffle is made by small company, which does not provide a lot of twist rates).
Economical - Price per shot. ”Reloadability”.
Practicality – Can you buy cartridges abroad for your big safari? Is is legal in your area? Can your child shoot it?
Environmental – Non-lead projectiles, as required by some countries.
Now, for the BC discussion, which may be what some think of when trying to compare two calibers, isn't that mostly a discussion of what projectiles can you get and actually stabilize? I am thinking that you can just get/produce a longer and heavier bullet, and your BC will be as good as the one you're comparing it to – effectively boiling it down to an availability and twist rate problem?
I hope we get a good discussion going.
EDIT: Formatting
r/ballistics • u/rockianaround • Nov 24 '25
What caused this? NSFW
This is at my workplace. It was here when the company I work for moved in. I’m just curious if anyone can tell me what made this indent.
r/ballistics • u/lotrgenius • Jul 22 '24
Infuriated by this NSFW
Could anyone help me understand why half of the articles online define sectional density as mass over diameter squared, and the other half say mass over cross sectional area? Pi is not equal to 4!!! That’s a 27% difference, which is huge. Which quantity is usually used when quoting B.C.s? Thanks!
r/ballistics • u/[deleted] • Jan 29 '22
9mm vs 45 ACP in very cold climates, 10 degrees and below. NSFW
I've read that having a higher ballistic coefficient helps in cold climates, but it's usually hunters who talk about this and it has to do with rifles obviously.
I know 9mm vs 45 is done to death in a lot of ways. But I find that people give mediocre answers to things with these two.
Question 1) I am interested to understand if there are any differences between the two in very cold temperatures? Specifically 10 degrees and lower
Question 2) Are there significant differences to be expected the further out you shoot? I am not talking about normally expected trajectories, but rather disturbances or lack of disturbances at different distances
r/ballistics • u/litovcas1 • Jul 14 '21
Are shotgun rounds traceable? NSFW
So I dont know if im in the right place but I think you guys will have most expertise on this thing
I think that shell is traceable right? Because each gun leaves marks on it by ejecting it and loading. But what about pellets and slugs? There may be some spread patterns that could be identified but overall I dont think that you can trace a buckshot.
r/ballistics • u/[deleted] • Mar 22 '21
45 ACP (PCC) vs 300 BLK NSFW
Both have 200 grain-ish options.
Both are supposed to suppress well, 45 "inherently" subsonic and 300 your choice.
I hear that sub-sonic 300 and 45 are VERY similar when it comes to performance against 2 legged threats.
Q#1: Do you think a subsonic 300 BLK behaves more like a pistol and less than a rifle, therefore taking on a lower standard of wound characterisitcs.
Q#2: Do you think Super-Sonic 300 BLK greatly out performs 45 ACP.
Details: Assuming the 300BLK is fired from a 9" - 9.5" barrel and 45 ACP a 6-7 inch PCC barrel to gain optimal velocity.
r/ballistics • u/villythekid1 • Jul 31 '20
Can anyone identify is this was a bullet? (trunk of my car) NSFW
r/ballistics • u/ObstinateFanatic • Oct 04 '13
Recommended reading. NSFW
It would be useful to have a list of books people recommend reading on or related to the subject of ballistics as well perhaps as a list of books to avoid. So if you have read any books on ballistics, please say which one and what your thoughts are on it. I'll try and create a permanent list on the sub somehow.
Current recommendations:
Handgun Wounding Factors and Effectiveness pdf, thanks to DapperArchon.
Applied Ballistics For Long-Range Shooting by Bryan Litz (beginner level) and Modern Exterior Ballistics by Robert McCoy (advanced level), thanks to flaz.
Goerge Klimi's (3) books The content is similar to a text book and has a lot on computation. The author will email you the software if you ask him nicely. Also various bits of software and a bibliography, JBM Ballistics, Thanks to krung.
r/ballistics • u/sorensenpower • Oct 03 '13
Question on ballistic coefficient NSFW
According to Wideners, the ballistic coefficient for the 168 SMK changes depending on the velocity. Here's what the website says:
.462 @ 2600 fps and above .447 between 2600 and 2100 fps .424 between 2100 and 1600 fps .405 @ 1600 fps and below
Does this mean the coefficient changes as it flies through the air (cause if that's true, then it makes it pretty impossible to calculate out to 1000 yards), or does it depend on the velocity when it leaves the barrel. Either way, this is the first I've ever heard of this.
r/ballistics • u/ObstinateFanatic • Oct 03 '13