r/BallPythonMorph • • Oct 29 '24

My beginner mistake

Post image

Hi, please advice needed, opinions welcomed. This was my first terrarium. Why they say it's suitable for balls when this happens with 65% humidity? I had to put adjusted sack (trash bin sack) under coco chips, unfortunately my ballie enjoyed digging under coco and sack. Don't make this mistake pls, buy glass only. 🥲

0 Upvotes

8 comments sorted by

14

u/Foreign_Storm6450 Oct 29 '24

The wood should've been sealed. If it was sealed this would've never happened if done properly. Also, no don't stick to glass, if anything PVC is the best.

0

u/General_Definition93 Oct 29 '24

How can I seal it? Now I have 4 glass and it holds everything in range, no spikes or enormous humidity / temp drops, maybe 1% in 3 days. It may be because we need to have 24°C inside and about 50-60% humidity

7

u/Live_Culture8393 Oct 30 '24

If that’s happening, it will continue to rot even under treatment. I’d just scrap that very poor design and get an actual PVC enclosure. But be careful with those too, because many of the cheaper ones have screen tops, so you will still have to make expensive mods

1

u/TheSnakeWhisperer1 Oct 30 '24

Humidity should be 60-75% and warm side should be 30-32⁰C with the cold side never going below 24⁰C, even at night. Your enclosures are too cool if they're staying 24⁰.

Wood needs to be sealed with polyurethane or pond sealer. Glass needs to be insulated with foam core board or foil bubble insulation.

1

u/General_Definition93 Oct 30 '24

I meant by inside our house. Snakes have 72% hum and 25-27 temp, warm sice 30.1-31.4°, depends on size

3

u/jessefyc Oct 30 '24

PVC is the way!

2

u/Polkadottedewe Oct 29 '24

Or water treat the wood

2

u/feogge Oct 30 '24

Usually when people are talking about wood they're talking about sealed melamine. Did you build this or buy it? Either way PVC is the best option.