A little back story, I am working with my dad. He has a shop and does commercial truck and trailer repair. I decided I wanted to work with him after I graduated high school. I was doing things here and there, nothing too crazy. He taught me how to repair tires at the age of around 13-14 and have been doing it ever since so that is my specialty
He was trying to get a Vehicle Safety System Inspection (VSSI) license for a while but it's not working out for him because he is too busy with work so he had the idea of making me study for it. Now mind you I have very little hands-on experience plus I never really liked studying at school. But I decided to challenge myself and I started studying for this exam. It took about 2 months to complete all these tests and I passed all of them on the first try. Thank God for that. I’m honestly surprised that I was able to do it. It gave me some more confidence in my abilities that I was able to do this.
I’ll provide the resources, practice tests, and YouTube channels I watched at the end.
It took on average 1 ½ weeks to complete each test. I started with A4, then A6, and finally A5.
A4 had lots of components involving a whole bunch of steering mechanics that you need to know about. My approach to studying these was very active. It's not like I watched a video and read a book then took some practice tests. If I didn't know a component or how it worked/functioned, I searched up videos and definitions on what it is, how it works, how to repair, so that I can understand enough to where I have a picture in my mind on how the mechanics of it work. Lots of questions about control arms joints, bushings, alignment, and a whole bunch of stuff that I already forgot about because I took this about a month ago.
A6 was probably the toughest but not by a lot. I spent 2 weeks on this test studying for it. You do need to know the basics about ohms, volts, and amps. This test can be made very simple if you break it down to its basic components. THe way my dad works on electrical with his work is to flow the wire and that's basically the principle i applied to the diagram.
You’d start with the battery, follow up until you hit a load or CAN network or some other kind of module, and finally hit a ground or wherever the source ends up to. One of the best ways you can try and understand electricity is picturing it like water. If the fuse is broken and you connect a DMM in series and you check the voltage at the beginning of the fuse, it would read full voltage (12.6V) because voltage is the electrical potential meaning that at that point the water (electricity) has that much pressure if it was released. Does that make sense? If you don’t understand a problem or a wiring diagram, ask ChatGPT to simplify it by explaining the flow of electricity like water and it should make a lot more sense. Majority of the questions that are asking you to find the issue it would be along these lines:
Open at X
Short to ground at Y
Resistance at W
Blown Fuse at Z
A lot of the test is showing you a diagram and asking you to find the cause of the issue in the form of these answers (mentioned above). Other than that, think logically about it and do your best not to overcomplicate the questions. It can be simple if you break it down into its simplest form. Take many practice tests that provide wiring diagrams in them (Online is kinda limited but you can still find good resources) and repeat over and over until you are confident enough in them. Also throughout A4 and A5 there were 2-4 questions regarding electrical problems FYI.
I was expecting the A5 to be much easier and it kinda was. I think lots of people think that A5 is the easiest. It's easier than A6 but not by a lot. You still need to put in the work and understand it. Concepts that were on the test:
Brake Drag and Brake Pull
Master Cylinder issues
Brake Pedal (Soft/Low/Spongy & High/Hard)
Hydraulic lines
ABS, TSC, ESC systems and issues
Drum brakes (Metering and Proportioning Valves)
Parking Brakes
Binding/Seized/Sticking Calipers
There are some more topics that are on the test but this covers a big chunk of it. (Do your own due diligence by looking at the ASE task list).
Again try and use your logic and prior experience that will be helpful.
If you are ever stuck and can’t figure out a problem, look at the question and find the main phrases or words and then look at the answers and see which phrases or words match the ones in the question. I finished with 30 min remaining on the test and I reviewed everything and that's how I approached problems that I was stuck on.
There are only 4 answers and if your answer is something else then you are wrong. This may seem obvious but it will help you approach the question correctly. That's probably the main reason why I was able to pass these tests because of the multiple choice.
The majority of you guys reading this and practicing for the test are most likely already prepared for the test because you guys are mechanics and have some kind of experience. I have very little experience and somehow I was able to pass. So don't doubt yourself you will do great.
P.S. Within this 2 month time frame (Except a week or two cause i was on vacation) I was spending almost the whole day on my computer and notebook studying. So I put in a lot of time studying for this and this is due to the fact that I really didn’t know what to study for so I just filled my brain with all the information I could think of and just hammered away at the practice tests.
Books:
I used the Motor Age Training books for all the tests. I read them front to back and then answered the questions on the back. In total the books cost me $120.
The thing about these books is that they have lots of info that don’t really pertain to the test but it could be helpful to understand a topic and help you identify what topics to look into. If I were to retake all the ASE tests I don’t think the books are a necessary source of info. There are sources that will give you more specific info pertaining to the test. If you are contemplating, buy the books and see for yourself. They also have lots of outdated info that aren’t really necessary
YouTube Channels:
I would always start with Master Automotive Training. Watch the livestream and take notes on it. It is a decent stepping stone to look into all the topics.
OldSchoolNoe is also really solid. He has info that is useful to know about. I would definitely check out his mini series and watch his videos a few times over until you really understand it
Free Practice Tests:
ASE Official Paid Practice Test:
Once you think you are confident enough, buy a test and take it and see what percentage you get. If I need to pass the A4, the minimum score I need is a 26/40, so I would get that as a percentage which is a 65% and if my practice test score is a 65% or higher than I passed.
The paid practice test closely resembles what will actually be on the test so I highly recommend you taking it. Then look at the answers that you got wrong and understand why you got it wrong and do that for all the questions. The crappy thing is that you can’t take multiple practice tests even if you buy another test. It will just show you the same one that you already did.
ASE Study Guide:
There is also this official study guide with some questions and answers that can help you. I only used this for the questions.
Final Note:
If I was able to do this in 2 months with basically no prior knowledge or experience then you can definitely do it especially since many of you guys are actual mechanics. Put in the study time and you can make it happen. Before every test I prayed so God could help me pass and He helped me. God bless you all!
If you have any questions DM me or just comment on them and I’ll try my best to answer them!