Hello, I am seeking an autel evo donation. Does anyone know of any programs available?

I just got a Nano Plus, the kit with three batteries and a three-post charger. All three batteries were completely at zero when I got it. I plugged the first battery into the charger, and it began doing the progressive lighting of the four LEDs to show it was charging. I plugged in the second, and it did the same, but the first stopped. With the third, the same thing happened.

Only one of them flashes to show it's charging at a time.

Is this expected? If so, what's the point of having three charging spots?

ive had an overheating issue in my 2010 impala for about a year I can't seem figure out why it won't have fans come on. I changed and tested everything I could. coolant temp sensor, tested fans, thermostat, radiator, water pump, fan relays/fuses, all tested and verified good.

I read about this scanner online that it can send signals to turn on systems at your command and tell you where signal stops and where your issue is. Is it worth it to give it a shot? or are these things just glorified obd readers? ive been reading some real rave reviews on them. any info Is appreciated greatly

How does the Evo 2 pro fly without GPS? I piloted a couple of drones without GPS so I wonder if anyone here had the chance to test and and knows if there are any issues.
I want to fly indoors where I know GPS doesn't reach.

I had a Nano Plus that stopped functioning about 6 months ago. It was requiring a calibration before flight but would always fail. The following was the series of events that results in me having the wrong drone 6 months later.

-I contacted customer service. They’re were only about 4-5 batteries worth of fight time on the drone in total. -They had me jumping through hoops getting/emailing logs and trying different things. -They eventually asked me to send it in. I sent it to them. -They told me my only option was to buy a new drone for $400. -I said I would. -They sent me an invoice that said they were sending an orange drone. -I requested a gray one like I had. -after an incredible amount of back and forth they said ok to sending a gray one

• I got the replacement and quickly found that the camera would shut off EVERY TIME it took off. It worked in the ground about 50% of the time.

• contacted service again -restarted the whole log/email progress. -they requested I return it (second shipping return out of my pocket)

• I sent it back. -no response to multiple emails for 2 months. -finally a drone just showed up at my house. -it was orange -sent an email asking for a gray one. -no response for a few days now. -currently stuck with a drone I can’t use in case they want it back because it’s the wrong color.

Hello all!

Thought i'd take some time to introduce myself. I work for the distribution company that is now responsible for bringing the Autel Evo 2 to the United Kingdom. We're expecting our first batch to land with us in the next few weeks and we're incredibly happy to be supporting them.

It's great to see some of the videos and photos you have all done so far - personally I want to pick up the pro bundle. because that 1" sensor is just ideal for what I want to use it for. While it's a new brand for us and for me personally, if I can help answer any questions then do let me know as I will be happy to help - also with any stock information in the UK!

Cheers!

I'm a Mavic Pro 2 owner and have become frustrated with its handling of No Fly Zones. The city where I live has two airports, a major international airport and a much smaller downtown airport that has no commercial service. The downtown airport is far more restrictive than the larger airport. Most of its grid is senselessly set to zero. With the most recent firmware updates, Mavic refuses to take off in these areas.

Recently my color grading has gotten more intense, and the 8 bit codec in the Evo was breaking apart too easily. Switching to a 10 bit profile (H. 265) was amazing and has helped me to take my color grading to the next level. This video shows a screen recording of how to switch to 10 bit as well as why you should also shoot RAW photos (which I believe are 12 Bit since they require less processing) Sample videos in 8 Bit and 10 Bit are provided as well for compasison. Enjoy! https://youtu.be/WqXhh22T8ww

1 this drone often just stops moving forward while trying to fly forward, i have to let off the stick and try again and it will start moving again

2 it also randomly seems to drop and climb, and it does this often while trying to move forward, usually this rises and falls in small increments up and down

3 some times it just insists to descend at a fast rate

4 while moving forward it also seems to sway gradually left and right most of the time

5 some times it pans hard to the left and right, like 30 degrees fast, while moving forward

6 sometimes it simply refuses to climb

7 some times it wont climb while moving forward, so i let off of moving forward then i can climb

8 sometimes the video lags bad, despite having good signal

9 sometimes the app interface on the controller will not respond to my input

10 some times the drone pans left and right super slow no matter the mode

11 some times tilting the camera up and down is super crazy slow, even if i am zoomed out. i found if i switch the camera from thermal to optical and back that it seems to go back to normal pan and tilt speeds

12 i cant find anyway to get a live video out, i read that this drone supports video out via usb c but it doesnt work for me

13 this is a "enterprise" drone, yet the hdmi port was clearly not installed and covered over, more of a complaint of a planned feature being left out

14 the app that you use on this drone comes with its default language as chinese, i had to use google translate to get the language changed to english, then i was able to activate it.

15 my optical camera's horizon is off by several degrees, this really bothers me

16 i cant figure out how to change from meters to feel/miles

17 i read this drone has no restrictions, but in the app i see hard limits are in fact in place, not a big deal though.

18 it did not make me sign up for anything, no accounts no log ins, which i am happy about but i thought the remote id required this, or something, perhaps i am confusing what dji does vs what the laws are vs what autel is doing with rid

19 while casting to a laptop out in the field so we have a bigger display to look at, the lag becomes unbearable for both the controller and the laptop screen, like a full second of lag. my dji air 3 lags a bit while doing this, but this drones lag makes it almost useless

20 the intelligent flight return feature does not give you enough time to get home

21 once you hit a certain battery percentage, i think its 10 percent, while trying to land it seems to kick you out of trying to land and resets the gimble back to 0degrees looking straight out, while i am trying to land, then it starts to descend on its own, but i dont get to see where its at in that moment, so i quickly tilt the camera down and make any adjustments on my landing, then it takes gimble control from me again and points it back straight out. this seems like a dumb programmed feature, not a glitch.

i calibrated the compass, i also calibrated the imu thing, neither of these actions had any affect that i could see

i started getting into thermal and nv cameras about 1.5 years ago so understand the basics and i know it calibrates its self occasionally which will make it appear to be lagging and thats just how it goes for now so i am not complaining about that.

having basically a flying 640x512 thermal camera at this price point is sweet and i have no regrets, but is this par for the course with this company? did my dji air 3 spoil me?

i got this drone for sale on ebay from what appears to be an official autel seller, and i bought it new and the price was cheap like $2300, did i buy a unit that didnt pass inspection?

i normally cant stand updates, but is there an update for this drone that will fix all this nonsense? i may have read this drone isnt even being sold officially in the usa just yet, are they still working out the bugs for this market?

i have been dreaming of getting a thermal drone for maybe 5 years or so, so despite all the issues i am still happy with it, i just hope it can be better, with an update or exchange, but i fear this is common with this company based on other things i have read about their drones.

any input about my problems would be appreciated

I just bought this Autel MP900TS and I'm working on setting it up. I noticed there is a mandatory country/region selection prompt that must be filled out. Do specific countries or regions affect any usebility or functions of the scanner? Is there a certain region or country that would allow the most usage or functions?

My dad bought an autel scanner for $65 used the other day that didn't come with an SD card. When we plug it in to vehicles it gives us the please update screen

Got an autel account set up but can't get the register password.

Is there anything I can do?

There's no way to access the actual OS.

On PC Suite it says "No updates available" which then switches to "Please log in" despite just logging in.