r/AskAMechanic • • 5m ago

High Idle Chevrolet Spark 2012 Engine Number Starts With B12D

1 Upvotes

Hello everyone, I replaced my spark plugs and plug leads on my own. I watched a YouTube video step by step and put everything back where I found it. After that process when I started the car the revs went up to 3000rpm.

After googling I read that it could be the IAC valve, so I replaced it. The car is now idling between 1400rpm and 2000rpm. The engine is shaking a noticeable amount when the car is idling and there are popping sounds coming from the exhaust.

The reason I replaced my spark plugs and plug leads in the first place was due to the car having a small forward jerk when accelerating, and "missing" (i think that's the correct term). I would have to accelerate a bit to get the revs up because it felt like the car would cut off.

I do not know too much about cars, this was the first time I attempted to fix my car on my own.

From everything I've read I'm stumped as to what it could be, I am going to get a mechanic to take a look but I would also like another opinion.

Any help would be appreciated and if any more information is needed I will try my best to explain the problems.


r/AskAMechanic • • 18m ago

2020 Tacoma Steering wheel shakes moderately when braking at high speed.

1 Upvotes

I’ve read it could be warped rotors or bad alignment. Just curious what kind of shop I should bring it to.


r/AskAMechanic • • 1h ago

$1200 for 4 New Cooper Tires, Blake Fluid Flush, Oil Change & Inspections. Fair?

1 Upvotes

2021 Honda Civic EX.

Went to a different mechanic than my regular because I’m staying with my MIL while she’s grieving.

Needed an inspection. Tires didn’t pass. I knew they were close to needing a replacement. I ended up opting to change all four, but I was at a damn Mavis. So bought Coopers (wish they had better in stock but couldn’t wait).

Charge was $1200 and some change for four tires, alignment, oil change, break line fluid flush, inspection, mounting, balance, etc.

I feel like from basic research that’s fair, but I really don’t know much. Wanted a human opinion, if anyone with expertise can chime in. Sorry if I’m missing detail.


r/AskAMechanic • • 2h ago

Removed PCV Valve but the bottom part was missing [Acura MDX 2005]

Post image
2 Upvotes

I went ahead and replaced my PCV Valve but when I removed the old one a big chunk of it was missing.
How do I proceed from this?


r/AskAMechanic • • 2h ago

Lifter tick?

0 Upvotes

2021 Chevy Tahoe Z71 5.3L. Ticking sound just started 4 days or so ago. Had oil changed a week and a half ago, so it’s not low oil. Prior to this tapping sound, after first start up of the day, I would hear/ feel a series of light taps when accelerating the felt and sounded almost like rocks hitting underneath my truck, RPM would drop slightly with every tap, and engine would hesitate a little bit. That has stopped, but then this ticking started. It does not go away after it warms up and increases with acceleration.


r/AskAMechanic • • 3h ago

Is my head gasket going out

1 Upvotes

I drive a 2014 Subaru forester. I’ve had an oil leak for a hot minute but just continue to fill it. Recently I had new tires put on and right after on the way home my temp gauge flashed red like twice and went off. My brother is saying my head gasket is going out and I might as well replace the whole motor. I don’t know anything about cars but he doesn’t really either, so I’m trying to find peace of mind really because I haven’t driven it since and I’m scared something will happen. I definitely can’t afford a new motor or head gasket job right now, and I was told there could’ve just been a bubble in my coolant from the car being on a lift and it could be as simple as that. Opinions?


r/AskAMechanic • • 3h ago

What could be causing this?

1 Upvotes

This is a 2006 GMC Sierra 1500 SLE 5.3L.
I am hoping I could be pointed into a direction that can help me identify what is causing this. If this is something to even worry about?
I replaced the starter about a month ago. Start up was fast and clean from then until last Thursday night. When I left work Thursday night the start up was like this, maybe a little slower. It threw a P0442 code and the battery light also came on. I realize the code probably has nothing to do with this. I replaced the alternator the following day. The battery was tested at autozone and had failed, so under warranty I replaced the battery as well. Assuming a bad alternator killed the battery. Unless it was coincidental and something else is draining the battery?After replacing both of those, nothing has changed regarding the way it starts up. From what I can tell there is no corrosion on the battery cables. There is a slight discoloration in the B+ terminal box on the cable going into the alternator. Not sure if that has anything to do with this. During this time I also found a ground that was broken off going from the firewall to the hood, so I also replaced that. Without knowing when that occurred, that could have been like that for a while. The ground going from the firewall to the engine block is also discolored but it is not loose. I am providing this context because I’m not sure if this an electrical issue. Could this be a fuel pressure issue? If the battery, alternator and starter were all replaced within a month, what could be causing the truck seemingly struggling to start? From what I can remember, when I tested the battery with a multimeter and the truck off, I got 12.4V? With the truck on I was getting around 14.4V and no drop when running accessories. I appreciate anyone reading this and offering any sort of advice!


r/AskAMechanic • • 3h ago

What dat noise

0 Upvotes

2015 Subaru Outback.


r/AskAMechanic • • 3h ago

Higher CVT Temperatures After Proper Fluid Leveling Procedure – 2020 Toyota Corolla 1.6 CVT (1ZR-FE)

1 Upvotes

I recently changed the CVT fluid in my 2020 Toyota Corolla 1.6 CVT (1ZR-FE).

During my first fluid change, I didn’t follow the proper fluid-leveling procedure. I checked the overflow valve with the engine OFF and waited for the correct dripping pattern. Despite this, my CVT temperatures were consistently around 88–91°C (190–196°F) during normal cruising and city traffic.

After approximately 1,500 km (932 miles), I decided to change the fluid again to flush out more of the old fluid and increase the concentration of the new fluid. I used the same brand as the previous one Toyota CVT FE.
This time, I carefully followed the proper procedure according to the Corolla service manual:

● Brought the CVT fluid temperature to the specified 35–45°C (95–113°F).
● Kept the engine running.
● Shifted through each gear position (P-D), holding each for approximately 3 seconds.
● Returned to Park.
● Checked the overflow valve with the engine still running and waited for the specified fluid flow/dripping pattern.

I monitor my CVT temperatures using an OBD2 scanner connected to my phone, allowing me to track the readings while driving.
However, after following the correct procedure, I’m now experiencing significantly higher CVT temperatures under the same driving conditions.
My current readings are:

● 104°C (219°F) in city traffic.
● 96°C (205°F) while cruising at 100 km/h (62 mph).

Previously, I was only getting 88–91°C (190–196°F) under similar conditions.

What could have gone wrong?


r/AskAMechanic • • 3h ago

2021 Honda Clarity PHEV, transmission service DIY friendly?

1 Upvotes

The owners manual explicitly says to have a mechanic service the transmission, but provides plenty of instructions for oil changes.

From what I’ve seen on the couple of YouTube tutorials on it, it’s even less complicated than an oil change as there is no filter. So why does the manual strongly suggest not to DIY it?

Is there perhaps a filter and/or calibration process the YouTubers are unaware of?

For reference, I’ve changed my oil in all my vehicles the last 20 years, I’ve replaced and bled brakes on a few vehicles, etc. I feel I’m fairly competent. Is there something I’m missing about this service?


r/AskAMechanic • • 4h ago

Cylinder 2 not firing despite good compression, new ignition coil, spark plugs, injectors and valve

0 Upvotes

Hi everyone, I have a Chery A1 1.3 petrol. Cylinder 2 is always dead. Compression test looks good, spark is present, and injectors are new. The engine has rough idle, and unplugging cylinder 2 makes no difference. Any ideas what to check next, like valves, cam timing, or something else please?


r/AskAMechanic • • 4h ago

Brakes Locking Up

1 Upvotes

I just had my brakes lock up. I was driving around town and they seemed to become tighter and tighter to the point where I would floor it and go 10 mph. I got it to a parking lot and let it sit for a while to cool down and right now it’s okay. It’s a 2007 Chevy Express 3500 with 6.6 Duramax.

Thanks guys


r/AskAMechanic • • 4h ago

2019 Chevy Equinox went into Limp Mode yesterday, Chevy Dealership gave me these quotes (plus a headlight replacement) I'm hearing these quotes are realistic for parts and labor, but are either bigger ticket items avoidable?

Post image
0 Upvotes

I'm broke, I'm not trying to drop nearly 3k on car repairs if it can be avoided.. For a lil backstory, Car gave me the "engine power reduced" yesterday on the highway while I was going 73, but it did not limit my acceleration / cap my speed at all. (stayed at 60 the rest of the drive to be safe)


r/AskAMechanic • • 5h ago

Slight oil on spark plug

Post image
1 Upvotes

Just replaced the spark plugs on my 2019 tacoma. The one on the left had a small amount of oil on the threads. That one was also a lot harder to take out too and almost seemed stuck. Is this normal or something I should be concerned about? These plugs have about 100000 miles on them


r/AskAMechanic • • 5h ago

2013 kia optima 28k miles

0 Upvotes

Hi, I’m not car savvy at all. But my mother’s car is having a bunch of electrical issues. The key fob is not communicating well with the car. Sometimes it locks/unlocks and sometimes it does nothing at all. The headlights are also flickering on and off during idle and drive, but mostly at idle. During the drive headlights are mostly off. Dashboard lights dim in and out when headlights are flickering. Also the shifter keeps getting stuck requiring us to mess with the shift lock release. Fuse 20A looked fine but still was changed just in case. Key fob battery was changed. And the car battery was tested and was told it’s good (was also recently changed less than a year ago). And help please? Thank you!


r/AskAMechanic • • 5h ago

Strange ticking noise from under the hood of Kia Sportage.

Post image
1 Upvotes

So just two days ago, our 2020 Kia Sportage started making a weird sound and then started losing engine power. The check engine light flashes, and eventually the car will not go more than 15 miles an hour.

We went to AutoZone to have a diagnostic scan run
And the employee at AutoZone told us that it was a powertrain system issue and we would probably need a new engine.

Now I’m no mechanic but I am mechanically inclined. I had a similar problem happened to my 2004 Chevy Silverado 2500 HD and it turned out to be afraid wire that cost me seven dollars to fix.

My question is this: is it possible there is a solution that is not a completely new engine? Because it seems to me it could be any number problems sending this code out. Am I wrong?

I’m going to upload a picture of the report from the scan.


r/AskAMechanic • • 5h ago

Looking for help on this suspension 1999 ford ranger xlt 2.5 2wd manual

Post image
0 Upvotes

Just picked up a 1999 ford ranger as a spare vehicle/ to learn some more mechanic skills/ knowledge. The left side of the bed sits about 3-4” higher than the right. All bed mounts are in tack, no broken leaf springs, or anything that looks out of place or broken. Based on the rest of the bed and the other wheel gaps it seems as if the right side of the bed is the proper height. My thought is maybe bad shocks? Also wants to throw you off the road when you hit a bump in the rear, guessing it’s all related. Any help is appreciated thanks!


r/AskAMechanic • • 5h ago

Does this 4l80 valve body look like it failed in any way

Thumbnail
gallery
6 Upvotes

96 c2500 4l80. Having issues with it. Suddenly lost reverse and overdrive thought it could be the check ball since solenoids were fine and harness is new. Possible check ball issue was where I was pointed but not sure now that I have it out. P0756 code came with it still has 1,2&3 if I clear the code. Is there anything else it could be or I could check if this part of the valve body looks good?


r/AskAMechanic • • 5h ago

Rear end sounds on my 2015 ram 3500

1 Upvotes

Hi there, I own a 2015 ram 3500 cummins and just recently when i shift the truck from drive to reverse or vice verse skipping neutral there’s a loud clucking or sometimes a snapping sound coming from rear of the truck, I examined the u-joints and they aren’t worn or have any side to side play or are binding due to axle orientation, however i did notice i was able to rotate the drive shaft maybe 1/4 inch at the rear yolk which is where i first noticed it, i pulled the drain plug and there was goop on it which turned out to be anti-seize and very minor and small flakes, i did verify the oil lvl and it was at spec and the oil wasn’t black and still had it’s original gold ish colour to it, i was on the phone with a ram tech who said that there should be a lil bit of rotational slack in the driveline when parked on level ground but whenever i was rotating the axle side to side i heard a slight knock coming from the diff (aam11.5), he also mentioned that all the 4th gens he owned fid the same thing, i also did read that the slip joint grease on the t-case output shaft was prone to washing away over time which has caused it to bind and have issues sliding along the splines when the driveline loads up when put in gear in some cases, But despite all that I would like another persons insight on this who’s dealt with the issue or worked on a machine that’s had the issue, any replies or insight is very much appreciated, cheers.


r/AskAMechanic • • 6h ago

Unknown item hanging down from car frame.

Thumbnail
gallery
1 Upvotes

Hi. Does anyone have any idea what could be wrong here?

2017 Mazda 6. There's this cloth-like thing hanging down on the passenger's side, about a third of the way from the back. Black plastic-type on the outside, looks like cotton or fiberglass on the inside. I've included pictures of it hanging down, and where it's attached.

There was some terrible wind awhile back, and I think I ran over some road debris one night - like a thicker stick. I checked after a drive and above it doesn't seem to be hot,

Do I need to do anything about it, or should I just remove it?

Thanks in advance!


r/AskAMechanic • • 6h ago

Coolant in 2003 Dodge Caravan, ELI5

1 Upvotes

This might be as much of a relationship question as an engine question. I don't think I can trust my BF as far as car issues go. I would explain more of that dynamic but I think it boils down to, it pisses him off that I don't blindly accept what he says about cars.

Today I was driving down the road when I hear the sound of check engine light. It's the coolant light and the gage is reading hot. I buy the coolant and decide to have him "help me" put it in. After stopping for the coolant, the temperature went down to halfway, and the check coolant light turned off. It stayed there even after driving home.

Initially he wanted to put it directly into the radiator. I've heard of it, don't know if it's right but since it was so low, it could have been correct. I said nothing about it but I pointed out the overflow tank. It's dark so I'm using my flashlight to confirm when to stop pouring. He later says something along the lines of, he believes there's a reason it is completely out of fluid. I admittedly have not checked it since I don't know when. He says something about the sensor being out and it pulling too much coolant... There were more words but he was honestly giving me "guy trying to out smart a girl because she doesn't know better" vibes.

Can someone please explain to me like I'm five how a radiator works in conjunction with the overflow tank and the sensor?


r/AskAMechanic • • 6h ago

Do these need to be replaced?

Thumbnail
gallery
7 Upvotes

r/AskAMechanic • • 6h ago

2014 Volkswagen Passat Diesel TDI (191000km) -P026A

1 Upvotes

I'v had the car since 33000km and it always ran well but now this engine code comes up. It means "intercooler performance below threshold" and Im almost certain the turbo is leaking oil into the intercooler system. Iv always maintained it fairly well and changed fluids accordingly.

I was quoted $3500 for the repair (new turbo). Is this the right repair? is there a band aide solution I can do in the meantime? I cant justify spending that much on an older car like this.

Also side note as the weather has turned colder the engine light comes on far less frequently.

Would love to hear some thoughts.


r/AskAMechanic • • 6h ago

Any thoughts?

1 Upvotes

In this video I’m pumping the brakes a bit to make the front end bounce slowing down from about 30-40kmh to 0. This noise is new after someone pulled out blocking the road on a 80kmh back road. Panic stopped doing around 95kmh and slamming on the brakes to 0