r/AskADataRecoveryPro • • Feb 01 '26

Can anyone tell me why?

Post image
250 Upvotes

Left one 160 gig, it's been running since 2013, i dropped it countless times, been into many systems still working perfectly. Right one 2TB bought in 2023 never abused or dropped it was installed on my pc, hardly used 2 years and it's dead


r/AskADataRecoveryPro • • May 15 '26

Currently heartbroken because I was removing the heat sink from my m.2 drive and this happened. How screwed am I?

Post image
151 Upvotes

r/AskADataRecoveryPro • • May 18 '23

Why Always Clone First?

97 Upvotes

Before I get into it, let me define a few words as I use them, so that there is no confusion:

Drive copy - file or partition level copy from one drive to another

Drive clone - sector-by-sector copy of a drive from one physical drive to another

Drive image - sector-by-sector copy of a drive from one physical drive to a file

The short answer to the main quesion, "Why always clone first?", is because it is safer. But, I'm sure that you were hoping for a better explanation than that. To answer it, let me first start with a short story.

Many years ago I had a reseller send me a drive for data recovery. When he first received the laptop containing the hard drive, the customer was having issues with Windows. So, the tech removed the hard drive and ran a full test which reported that it had bad sectors. After that, he did a full scan of the drive with a data recovery program to reconstruct the file system. Now, a couple days into it, he selects the files and folders his client wants recovered and the drive stopped responding. This is when he stopped and brought it into my lab for us to assess it.

Our first step was to inspect it in our clean room only to discover that the drive had suffered a fatal head crash with rings etched into the platters and debris everywhere. Unfortunately, this drive was no longer recoverable and the customer lost 100% of his data. This data loss was 100% preventable, had the technician approached the situation differently.

In his first step to test the drive, the technician read every sector once, yet did not copy a single sector to another drive

In his second step to scan the drive with data recovery software, he again read every sector on the drive a second time, yet did not copy a single sector to another drive

In his third step to save the files out, it was too late

When we receive a drive for recovery, whether it be because the drive has phsyical issues or when the customer says the drive is healthy and they just want to recover a lost file, we always, always, always start by cloning/imaging the drive (after necessary phsyical assessments are done in the clean room, of course). When cloning a drive we are essentially testing every sector of the drive while making a backup copy of every sector we have read. So, when the clone is done, if a file system recovery is still needed on the copy, we are doing so on a known good drive, without risk of making things worse.

But what about healthy drives? Why do we waste time cloning them?

Well, it comes down to being safe and not making any assumptions. At least 75% of the time, "healthy" drives are found to not be as healthy as the customer thought. So, we don't want to be victims of the scenario previously mentioned. It is better to play it safe.

What if the drive is large and the volume of files to be recovered is small? Isn't it less taxing on the drive to just get the targeted data?

This is one of those, Yes & No, answers. Yes, it can be less taxing if done right, yet it can be extremely taxing if done wrong. Let me break that down for you, starting with the no.

No, when you directly read a drive, the heads bounce all over the place going back and forth between the file table and the locations where the file sectors are stored. Not only are you increasing the wear on the heads, it requires you to constantly re-read sectors in the file table. If the drive is unstable, one might be lucky and get 100MB/sec transfer rates, but usually are stuck at speeds under 5MB/sec.

Yes, if your file recovery software is connected with background drive cloning/imaging. All data recovery professionals use special data recovery hardware/software combination to give them even more control of the patient drive while having the ability to image sectors from targeted files in a linear process. Basically, they select the sectors that they want to copy and the drive will only copy those sectors in order, skipping the sectors that they haven't selected. Not only does this proecess prevent the need to constantly re-read sectors from the patient drive, it tends to be a lot faster. What the previous method would do in days could be done in hours this way.

Not so fast! What about really large RAID arrays that could contain dozens of drives and hundreds of TB of storage?

In my opinion, while it requires a lot of storage and time, it is even more essential to clone every drive of a RAID for data recovery. I just recently assessed a 36 x 10TB RAID where the customer reported only 2 drives offline. Yet, as part of our assessment process, there were less than 10 drives that were not in some sort of state of early failure. The chances that another drive fails before the recovery completed is staggering. We have found that the two most common reasons for unrecvoerable RAIDs are physical failure beyond recovery which is far less common than irreversible data loss from previous recovery attempts on the original drives.

But, what about unstable drives? What is so great about cloning/imaging?

This really depends on the quality of software and hardware being used to do the job. With the help of data recovery hardware, we have the added luxury of being able to control the drive's power and resets, meaning that when a drive goes unresponsive, we can give it a little nudge to snap out of it. The key featues with the software is our ability to control how long to fight with a sector read, what to do when we are unable to read a sector (stop & power off, skip a block, jump to another head, try again and so forth) and to work with multiple passes, so that we get the more easily read sectors copied before we put too much effort reading those which may not be read or bad enough to kill the heads.

So, what is available for you to clone a drive with a log and multiple passes?

Multiple pass cloning software

- ddrescue

- hddsuperclone

File system recovery software with multiple pass imaging taskss

- R-Studio

- UFS Explorer

Data recovery cloning hardware

- DeepSpar USB stabilizer + windows software of your choice (comes with R-Studio Technician)

- RapidSpar

- DeepSpar Disk Imager

- MRTLabs Data Exploer

- PC3000 Data Extractor

This post will likely evolve with some edits as errors and ommisions come to my attention. Let the comments and discussions begin.


r/AskADataRecoveryPro • • Dec 22 '25

What happened to r/datarecovery ?

34 Upvotes

I'm a Data recovery professional who used to help out in r/Datarecovery, but I stopped offering tech support on Reddit entirely shortly after this sub was made, just because of Reddit's tendency to have incorrect answers voted to the top, even on well moderated subs. I went back to helping on forums etc, and stopped using Reddit as much, even as a user.

Well I decided to check back in on Reddit recently and the biggest change seems to be datarecovery is now exclusively incorrect answers. Does anyone know what happened? It used to be my favorite sub and I really liked helping people avoid the misinformation that's so prevalent on the Internet about data recovery. I'm glad we have this sub but I'm still bummed about it turning into the exact opposite of what I tried to help make it, a couple of years ago.


r/AskADataRecoveryPro • • Feb 05 '26

Went to a local business for data recovery from my SSD that could no longer be read by the laptop- does this sound realistic/make sense? Does the price quote seem reasonable?

Post image
30 Upvotes

Thanks in advance for any feedback! Just want to hear from some experts whether or not any red flags are sticking out here.


r/AskADataRecoveryPro • • Feb 27 '23

Best Way to Repair Corrupt MP4 Video File

28 Upvotes

Hello

After recovering some MP4 Video Files from

Problem HDD Some would play with VLC Player some would not.

Best Way to Repair Corrupt MP4 Video Files

Can you reccomend a Good Web Site with

Info on the MP4 Video File structure ?

Thanks Geo


r/AskADataRecoveryPro • • Nov 26 '23

DMDE Recovery - Data recovery successful but some files are black

25 Upvotes

Hello,

I recovered some removed footage (nothing has been written onto the SSD since the files have been). The files are RAW footage and the player opens them up without prompting any errors but the screen is black and I can't scroll. The files weigh how they should (between 10 and 30GB depending on the clip). How can I make sure the recovery is successful? The first two clips recovered perfectly and after that, none of the ones recovered are playable. I even tried to recovering the clips that were working the first time and they are black too.


r/AskADataRecoveryPro • • Feb 28 '24

About The Data Recovery Professionals Group

21 Upvotes

There has been discussion recently on Reddit subs about the Data Recovery Professional Group www.datarecoveryprofessionals.org. Some people seem to be offended that they cannot join the group. So I will detail here who we are and why joining isn’t just an ‘open’ option.

The group started in 2020. Members of the group knew each other from data recovery forums, conferences or training courses. So we were a group of friends and businesses associates who knew each other personally. We offer advice to people both inside and outside of the data recovery industry on best practices and how to recover data safely. We know that some data recovery does not require professional help, so we advise people on the safest way to recover data where that is appropriate.

While taking part in forums, it became obvious that a few other data recovery professional did not share our way of thinking. We got into many arguments where we were offering help to members of the public in the safest way to recover data (if appropriate). One data recovery professional in particular has the stance that every data recovery job should be handled by a data recovery professional. We didn’t agree with that. Some of the conversations became heated.

So we decided to form a Facebook Group where we would be free of the negativity. A place where we could share ideas, techniques, successes and share private business information that can help us all grow. Most of the group had been very active on the r/datarecovery sub helping private individuals recover their data. One thing we noticed was that as r/datarecovery is a big group, anyone is able to post with limited moderation, so there is a lot of dubious ‘advice’ given to OP’s by people who literally have no idea what they are talking about, and does exactly the opposite of protecting data. So about 2 years ago our member Luke Coughey decided to start r/AskADataRecoveryPro where people could ask questions of data recovery professionals. As a smaller group it can be moderated and we have ‘flares’ to indicate who is actually a data recovery professional and/or a trusted member of the data recovery industry. While the group is small, we are spread across the world and can offer professional data recovery in those locations, or at the very least we can recommend a trusted professional. We feature the Data Recovery Professionals logo and link on he sub so we are sure individuals are being referred to a trusted company. Is it a form of marketing, yes it is, although that was not our intention.

In a recent post we were referred to as a ‘pretentious marketing organization’ by someone who wanted to be a member and was declined. They were declined because none of the group actually knew the person either personally or professionally. As we share private information, being known and trusted is the number one ‘check box’ item when looking at adding to the group. Another comment referred to us as a ‘Good Ole Boy Club’ because they could not join. Once again no-one in the group knew that person professionally or personally. They wanted to know why we didn’t post a way of joining the group. As the main prerequisite to join the group is that we know prospective members personally and professionally, prospective member ask us personally if they can join, so there is no need to post an ‘official’ way to join.

Who We Are:

We are a group of independent, owner-operated data recovery professionals from around the world. We share and collaborate on ideas and techniques regarding professional data recovery, forensics and data recovery software development. Many group members are beta testers for professional data recovery hardware and software manufacturers who supply the industry, helping those manufacturers get the most from their products. This work then feeds down to the rest of the data recovery community and allows the industry to become more efficient. Likewise, since we use these data recovery tools every day, we constantly make creative suggestions on how to improve them.

Who We Are Not:

The group does not represent the data recovery industry. We are not an "association." Instead we are a group of like-minded individuals who constantly strive to offer our customers the best value for their money. While we do not represent data recovery manufacturers, we do of course use their products daily.

I hope the above goes some way into describing who we are and how we work. We are not just a data recovery listing service where you pay money and have your company listed. That was never, and will never be our intention. We are a group of data recovery professionals who have faith in recommending each others services.

Tim Homer - u/DesertDataRecovery

Founder – Data Recovery Professionals


r/AskADataRecoveryPro • • Dec 10 '25

HDD With Bad Sectors Freezes When Copying Files — Need Advice Before Visiting a Recovery Shop

Post image
19 Upvotes

Hi everyone,

I’m dealing with a hard drive that has bad sectors, so I bought a new SSD to replace it. I’ve tried all kinds of methods from ChatGPT, Google, and YouTube to move my files over, but I keep running into dead ends. I’m not very tech-savvy, so maybe I’m doing something wrong.

At this point, it looks like the only option is to copy my photos/files one by one. But even then, it sometimes hangs if it hits the specific photo or file that sits on the bad sector. Transferring whole folders is almost impossible because the process freezes the moment it touches the corrupted file.

I’m considering bringing it to a professional shop, but I’m also worried about data privacy and possible data leaks. Before I go down that route, I wanted to ask if anyone here has advice or safer methods I should try first.

Really appreciate and grateful any helpful input!


r/AskADataRecoveryPro • • Dec 04 '20

How Professional Data Recovery Varies from Non-Professional

19 Upvotes

Professional Evaluation of a Hard Drive:

In professional data recovery, the steps taken when a hard drive is first received for evaluation are critical. These steps are built on both experience and knowledge. For example: If a hard drive has been dropped and therefore more than likely has read-write head failure, we would initially open the drive up in the cleanroom and check for damage to the read-write heads. If the drive goes to a location without a cleanroom, the only option they have to 'test' the drive is to power it up, risking further damage to the drive and possibly making the drive unrecoverable.

Cleanroom Work:

When a hard drive is opened after mechanical failure it MUST be opened in a cleanroom environment. Professional data recovery companies use Class 100 cleanroom environment (at a minimum) which filters out particulate matter from the air. The read-write heads in a drive travel approximately 3nm (nanometers) over the platter surface. That's smaller than a smoke particle. So any dust getting inside the drive enclosure can make a drive unrecoverable. DO NOT BELIEVE WHAT YOU SEE ON YOUTUBE.

Recovering a Hard Drive:

Any recoveries done by a professional data recovery company will start with making an image of the clients drive. This is done at a sector level. Professional data recovery hardware and software combinations allow us to image sectors on a drive in sequential order. So whether we are imaging the file system, or the whole drive, our pro software allows us to sort the data we need into sequential order. We start at the sector containing the first byte of data and image through to the last sector in sequential order. This prevents the read write heads from searching all over the drive for the data. This puts the least amount of strain on the drive, and therefore increasing the recovery chances. When we image a drive, every sector of data (512 bytes) is copied to a different drive or an image file. We never lose the chance of recording a sector as that may be the only time that sector can be read. Professional tools such as PC-3000 allow us to read sectors forwards, backwards, with software and hardware rests, increased read-timeouts and a host of other methods to recover as much data as possible.

Firmware Failures:

Some hard drives (especially Seagate) suffer from firmware failures. A hard drives firmware is its own internal OS. Without reading this firmware the drive will not be able to access user data. Professional Data Recovery companies have tools such as PC-3000 which can read and re-write the firmware to regain user data access.

The End of the Recovery:

Every professional data recovery company will keep a copy of the recovered data for a set period of time (normally 10 days). So if anything happens to the data when being transported, they do have a backup copy. You would be surprised how many times this backup data is needed.

Post your questions on this subreddit and we will try to help you.


r/AskADataRecoveryPro • • Nov 26 '25

Problem with harddisk!!!

Post image
18 Upvotes

I recently bought a look you and converted my last laptops storage into external hard disk but after every few days my external hard disk got corrupt (exactly not corrupt ) but my loq don't accept it with format and I have only 512 Gb storage and it's almost full in just 20 days and this was my backup. But due this this method is unreliable Can anybody help ? How to prevent this from external hard disk from corruption?


r/AskADataRecoveryPro • • Sep 26 '25

Need SD Card recovery that won't cost thousands...

18 Upvotes

I apparently formatted my SD Card and shot on top of it, even though I don't even remember doing so in the first place...

I'm looking for someplace to send in the memory card that can recover the data. I had a friend have a similar experience and sent her card into Salvage Data, but she had to pay almost $2,000.


r/AskADataRecoveryPro • • Jun 19 '25

What chance is there to recover the data from this SD card?

Thumbnail
gallery
17 Upvotes

I have a physically damaged SD card (https://www.kingston.com/en/memory/search/discontinuedmodels?partid=SDA10%2F512GB) - a corner got squashed somehow and it doesn't read anymore in any SD card reader I tried. I pried open the case and took the pcb out. The flash memory and controller look undamaged, but some traces on the pcb in the corner likely got severed.

If I could get hold of another such SD card, how feasible would it be to transplant the flash chips and controller and then be able to access the data?

Also, are there any tests I can perform using a multimeter to better assess the damage?


r/AskADataRecoveryPro • • Jan 09 '23

Uncovering the Truth about Data Recovery Success Rates

Thumbnail
datarecoveryprofessionals.org
17 Upvotes

r/AskADataRecoveryPro • • Sep 06 '23

Best Data Recovery Service?

16 Upvotes

Hello everyone, im kind of new to the data recovery space and i deleted a lot of media files almost a year ago and was wondering what is the best data place to send a drive to? My pc is a old hp pavillion 2011 with a hitachi drive it works fine but ive only really used softwares to recover as i was unaware of businesses that do data recovery as well. I went to one local place where the guy ran scans and stuff in-house, it wasn’t the best but many popular places I see like Salvage Data, Secure Data Recovery seem great but reviews on Reddit tell me they are not the best to work with. I was looking to recover media files like mp3, mp4, wavs, zips ik a lot of it is hard to do fully but would there be anywhere big name or reliable to send my drive to? I just don’t want them to be tampered with or corrupt it or overcharge for it


r/AskADataRecoveryPro • • Aug 19 '23

We hit 2000 followers

Post image
16 Upvotes

While many Reddit subs have a lot more members, I'd like to thank you all for helping make this the goto sub for professional data recovery advice.


r/AskADataRecoveryPro • • 11d ago

Recommendations

Thumbnail
gallery
15 Upvotes

Hi all,

I am looking for a recommendation for a reputable lab that could help recover the data on this drive. I am in new jersey but am willing to ship of course. Im not sure how to proceed. Please advise thank you


r/AskADataRecoveryPro • • Dec 13 '25

Cloning SSD Failed (Error 9), Now Data Corrupted – Need Advice on Recovery

Thumbnail
gallery
15 Upvotes

Hi everyone, I’m dealing with a serious issue and could use some advice.

Here’s what happened:

  • My laptop originally had a Kingston NVMe SSD with Windows 10 installed.

  • I wanted to upgrade and move everything to a new T-Force SATA SSD (512GB).

  • I used Macrium Reflect to clone the NVMe to the SATA SSD.

  • The cloning process finished but showed Error 9 at the end. I didn’t think much of it at the time.

After that:

  • I formatted the NVMe and tried a fresh Windows install, but the system kept crashing with WHEA_UNCORRECTABLE_ERROR and Critical Process Died BSODs.

  • Task Manager would freeze before the crash.

  • This made me suspect the NVMe was failing.

To confirm, I tested with an old HDD running Windows 10, and it worked fine (just slow). So the NVMe is likely defective.

The new problem:

  • On the T-Force SSD (the clone target), I have important photos and videos, but many of them are now corrupted or unreadable.

  • I think the corruption happened because the NVMe was already failing during the cloning process.

Questions:

  1. Is it possible to recover these corrupted files using free tools?

Extra info:

  • Before cloning, the NVMe seemed fine. My friend transferred files from phone → laptop and laptop → phone without issues.

  • So the corruption likely happened during cloning or later reads from the failing NVMe.

I need to reuse the T-Force SSD soon, so I’m planning to copy the corrupted files to another HDD, then reinstall Windows on the T-Force SSD, and attempt recovery from the backup.

Any advice or step-by-step guide would be greatly appreciated!
Thanks in advance.

i can't write english well so i use AI to breakdown and write for me


r/AskADataRecoveryPro • • Mar 21 '23

Stellar Recovery is a very shady business - DO NOT BUY

15 Upvotes

I was desperate to recover my family photo and video, so I purchased Stellar recovery program for the sole purpose of repair and recovery, but apparently failed. I am going through a painful after-sales service with them.

1st - AUTO renewal subscription after check out (WTF ?). I normally don't pay too much detail to the receipts, but luckily I did this time as I noticed they did automatic renewal for me. This was never an option to check during checkout. Even you e-mail them, they send you back to the ticket service center, and there's no linkage to any page that said CANCEL. When you submit a ticket, they cancel my subscription ticket just because I have other data recovery ticket going on. Seriously WTF? They are two separate issues.

2nd - Software does not perform as expected. I purchase the software to repair them. So I sent them two sample files which has failed to repair. And they are asking for $99 additionally for EACH file.


r/AskADataRecoveryPro • • May 31 '26

RAIDZ1 failed. I’m gonna get fired

14 Upvotes

I recently had my test bench (6x 16TB drives in a RAIDz1 running True NAS) go out a few times during a storm. After that 2 of the drives (2 oldest) but been killed. Turns out someone moved my GLPI and Immich to that NAS so I have no tickets and I lost all our pictures. I have tried everything and it just gets more and more errors. How can I get at least the images off the immich on here? I have 5 drives that still power on but only 4 and good health so I have no way to may TrueNAS repair it.

Is there a program I can use to recover what I can from the raid if I connect the drives to a PC? I don’t have the budget to seen it off for the data to get recovered for $5000….


r/AskADataRecoveryPro • • May 14 '25

Pc is nuking itself right now as we speak

Post image
13 Upvotes

Pc was on and suddenly rebooted, probably because of windows 11 updates... this showed up. Do I kill power right now or do I wait? The reddit posts I've read are not conclusive. They say that chkdsk (which I assume this is) is the most dangerous and i need to kill power, but they also say I can't kill power during stage 1 because that's the most dangerous stage and it's currently writing to mbr.


r/AskADataRecoveryPro • • Mar 21 '25

Next time you see DriveSavers clowns in space suits, you'll know they're full of shit! But you still pay for it sending your drive there..

Thumbnail
youtu.be
13 Upvotes

r/AskADataRecoveryPro • • Dec 04 '20

The Results of DIY Data Recovery

13 Upvotes

When you have a hard drive failure and a friend says "I can fix it for you". Always think twice about giving the hard drive to them. Or if you are tempted to open the hard drive yourself after a quick visit to YouTube. Stop and think again.

Data recovery technicians spend a significant amount of time learning how to swap read-write heads successfully in a cleanroom without touching or marking the platter surface. Special tools and techniques are used on every head swap. Take it from the professionals, we each spent a considerable amount of time completing read-write head swaps on over 100 donor (practice) drives before even starting to look at clients drives.

We get hard drives in literally everyday looking like the ones in the pictures below. This is one I received today. Don't let this happen to you Images of DIY Recovery


r/AskADataRecoveryPro • • Apr 01 '26

My stupid mistake lost wedding day photos - NEED ADVICE!!

Post image
12 Upvotes

TL;DR - All the photos from my second camera are gone because I used the memory card in two cameras on the same day. I didn’t format it. Nothing from the camera is showing in DiskDrill, need to know where to go from here. Please be nice, I’m so painfully aware of my stupidity.

Essentially in a moment of panic, I made a stupid choice. I shoot weddings with 2 cameras. A main camera-Nikon Z8, and a secondary camera-Nikon Z7ii. At a critical moment my Z8’s memory card flashed that it was full. My other cards were clear across the room shoved in a corner behind tightly packed tables, that would have been impossible to get to with enough time to still capture the parent dances that were actively happening. My secondary camera wasn’t set up for what was happening either so I made a dumb decision (that I’m fully aware was stupid, trust me, I don’t think you can beat me up more than I already am), I popped out the CF & SD card from my Z8 and the SD card from the Z7ii and put them in my in my pocket for safekeeping, then popped the CF card from my Z7ii and put it into my Z8. Proceeding to use that card the rest of the night because I forgot I did that.

At the time I thought it was a calculated risk, thinking the SD card was still in my pocket as a back-up. Plus I have repeatedly forgotten to format cards before starting photo shoots, and usually, while uploading later, go “oh hey, I forgot to format, the last shoot is still on here too!” Unfortunately it seems my luck ran out there. Worse than that, my back-up SD card? Empty. Turns out the camera was set to overflow instead of backup. I have no idea how long it’s been like that because I have no memory of changing that ever, I always keep them on back-up! Alas…

When opening the folder for the CF cards on my computer in the past, if I ever used a card across both without formatting, there’s usually two separate subfolders with different filenames that indicate which camera it came from. This time it was just the filenames for the Z8. The Z7ii’s photos are no where to be found on any of my memory cards. I ran DiskDrill 8 different ways and those photos have completely disappeared. I also put the card back in the original camera, no luck.

This is where I need advice. I have no clue what happened or what to do from here! Recovery-wise that is. Are there specific settings I could adjust in DiskDrill and try again? Do I just give up? Should I escalate this to a recovery company to work on? If so, who is actually reputable? Last time I had a card fail it was because the pins were broken off and that cost me $2500 to deal with. I don’t think I can spend that much but is $1k and under likely? Any help is appreciated!!

In the meantime: Obviously I’ll tell my clients what happened and will reconcile with them directly. Thankfully there’s still photos of 95% of the wedding day, I massively overshot and favored my Z8 that day. Unfortunately there are three things I only shot with my Z7ii, ring photos (which I can reshoot if needed), the parent’s introductions into the reception, and the close ups from my 70-200. Not the worst case scenario as far as losing wedding photos goes, there’s photos of everything else on my other camera (safely uploaded and backed up twice). But what I’m missing artistically is the close-up shots which are usually my favorites and I feel like I failed them for it. I probably lost about 1k-1.5k photos, and still have over 5k photos (yes I know I overshot) to sort through so it’s not a total disaster but I’m a wreck over this.