r/Appliances • • May 22 '26

This is why you buy an induction range

0 Upvotes

There are many questions about moving from gas or radiant to induction. So I thought a picture of me cooking dinner on an induction range would save a thousand words. I know this isn't a cooking sub, but if you think about it the choice of range comes before the cooking. The pan with the dish rag on top is rice. It tends to bubble over while cooking and the rags catch it before it makes a mess. The other pan is lentils and have boiled over once, but the rag caught it. The pan in the front are the spices and browned onions for the lentils. There's no rag under that pan because browning can get too hot, besides there's nothing to boil over. When the cooking was done I hung the rags on the side of the hamper to be washed in the next load. The induction top cleanup took 2 seconds.

Do the rag trick on a gas or radiant stove and it will only end up with fire. The one challenge is I'm still not used to how quickly induction heats. I put the lentils on and turned my back for a second only to do the oh crap dash to turn the pan down. lol


r/Appliances • • Sep 29 '26

Lg studio range knob locks?

Post image
2 Upvotes

Just unboxed our new lg studio range and discovered these silicone rubber things.

Now i haven't had a chance to read the manual yet but I assumed these things go over the knobs.

Is this correct or am I totally wrong and they are for something else?

If they do go there, what is the real purpose for this? Is it to prevent kids from turning on the stove? If so why is one for 3 knobs and the other for 2 knobs? I left the oven knob free. There are also very easily removed. A child can easily pull this off. Am I missing something?


r/Appliances • • Oct 06 '25

Microwave working but not working

Post image
6 Upvotes

Hamilton Beach microwave seems to work, turns on and spins, but will not produce any heat. Light is also out but that has been out for a while. Any ideas of where to start? I took the cover off the microwave and realized I have no idea what I'm looking at


r/Appliances • • Jun 17 '26

Is there an actual standard for when a dishwasher counts as full enough to run? Domestic dispute.

4 Upvotes

Right. Hoping someone here can settle this because the wife and I have been having the same argument on and off for about six years.

My position is straightforward. A dishwasher should be properly full before you run it. Otherwise you're wasting water, electricity, and rinse aid that's not getting any cheaper. The machine is designed for a load.

Wife's position is that "properly full" by my definition would mean plates accumulating on the worktop for several days, which she calls unacceptable on aesthetic grounds plus the fact that the dog can reach the worktop.

The dog argument I'll grant her. The aesthetic one I cannot. The plates are clean of food residue, they're stacked, they're not in anyone's way. It is not a war crime.

What I'd genuinely like to know:

- Does Bosch (or any manufacturer) actually publish a recommended minimum load, or is this purely household custom?

- If you run a half-empty machine, what's the reasoning beyond not wanting plates on the worktop?

- Anyone actually got the other side to back down on this? If so, how?

Machine is a Bosch Series 6, four years old. Wife says the model is irrelevant. I disagree but happy to be wrong.


r/Appliances • • Apr 24 '26

Racks tilt in Whirlpool Model #WOED5030LZ

2 Upvotes

Does anyone have this model? There isn't one on display anywhere I can find in my area. I'm curious if mine is defective, or if it just a poor design and all of this model is like this.

Brand new Whirlpool oven. The racks have a lot of play in them, so much so that the food will actually slide when the rack is pulled out. I have spoken to Whirlpool several times. The first time they sent new racks. Exact same issue. When I called back I was told that if the oven turns on and gets hot nothing else is covered under warranty, even safey issues, and there is nothing further they will do. They also insisted it was an installation issues. I called Lowe's where I purchased it and explained the situation. They sent the installers back out and the looked at it. Oven is level. Racks slant forward even when all the way in, and even more when pulled out. They documented and took pictures and reported back to Lowe's that the oven is defective. Lowe's told me to call Whirlpool and tell them it was defective and they needed to replace it. Whirlpool told me to go fly a kite in not so many words. Currently escalated with Lowe's and Lowe's and Whirlpool are battling it out. I'm worried that if it just a poorly designed oven and I do manage to get it replaced it is going to be just as bad and I will be back to square one.


r/Appliances • • Apr 17 '26

Stay away from the Bosch 800

2 Upvotes

First off. Big F U to Consumer reports who rates this number one.  Here’s a list of reasons why you shouldn’t buy the 800 and how it’s inferior to an 8yr old GE. 

The Good

  • It cleans well.  As good as our outgoing GE.  Which is to say is “good”. I would have liked to be more blown away by it - there have been some dirty spoons and utensils to come out. Overall it’s fine, but should be stellar for $1,200. 

  • Rack organization is good. Hate the third top rack, more on that later. 

The Bad 

  • The touch panel is inoperable when door is closed. This may seem trivial since most users can’t see panel when door is closed. But our countertop allows for it.  It would be nice to resume functionality after door is closed considering it never resumes after the first goddamn press! 

  • The touch panel is capacity touch.  And by the way, never fucking works!  And you hit start, and it never stats even though it does beep.  WHY CANT WE GO BACK TO BUTTONS?!??  Its finicky. Bad user experience for…. $1200.   

  • No bottle washer.  To be fair, I knew this going into buying it, but it’s a feature I miss from my old unit and wish the Bosch had something similar. 

  • Third top rack.  Another “to be fair” - this would likely be an issue with any unit that has the third top rack.  It gets in the way (prevents tall things on 2nd row) cleans like shit, and doesn’t dry up there at all. 

  • The racks push in and out and feel cheap.  We’re supposed to have the SUPER GLIDE or whatever they call it.   The racks feel janky and cheap.  

The Ugly

  • There is next to no indicator that it’s done. The white light on the front goes off.  It’s make a 1 second chirp (as opposed to the symphony on Samsung washers). That’s it!  It’s way easy for someone to mistake it from not having run.  They should turn the light green or put a “complete” light at the top panel. NO indicator whatsoever.  Will need to by a CLEAN DIRTY magnet.    Stupid.  

  • App. Almost everything you need to do / control the unit requires the app.  I’m so sick of apps.   Because it dries so poorly, you’ll need to enable longer drying times IN THE APP.  

  • Drying.  Oh fuck you Bosch.   I got excited over the whole crystal dry thing. 60% better drying than blah blah blah.   BULL!   I like the idea of no heating coil in bottom so you can put plastic down there.  But it dries like garbage.  The performance of drying can be increased if you use jet dry (not by much) but I don’t want the chemical residue on my dishes. I shouldn’t HAVE to use additive to “remotely” dry the dishes.  Attached are some pics of what it looks like, no jet dry, with extended dry time enabled.    My shit is SOAKED.  

Doesn’t matter if this thing is more reliable (supposedly). For anyone looking for a new dishwasher, let me save you the research and money.  Lots of people recommending it for whatever reason - I recommend everyone look elsewhere for a better user experience.  If I could take it back, I would.  While not the worst appliance I have ever purchased (by any means). It’s not worth the $1200 and the advertised features are marketing BS. 


r/Appliances • • 8d ago

Appliance Chat Why are new washers such p*****s?

1 Upvotes

I’m really at a loss for words here. Bought a new Whirlpool washer because my old Admiral died after ~20 years. This thing has a center agitator and options for “deep wash” and what not but the sensor never fills it beyond approximately what’s in there. And it washes like it’s running with an egg on a spoon. It gets my clothes clean, buuuuuut…

My old machine would beat the shit out of clothes etc with the agitator when I needed it but this new one seems like it would rather opt for kind words over a spanking. wtf?

Reddit, give me some insight, please. 🤣


r/Appliances • • May 21 '25

Do not ever buy an LG product.

0 Upvotes

I purchased a washer, three months ago. A week or so. After having it, I knew it was broken. I first thought it was because my water pump outside was broken, so I didn’t think anything of it until I fixed the water pump. I immediately realized that it wasn’t the water pump at the actual machine was not working. I called Home Depot. They came to check if installation was correct, and it was. They told me that the machine was broken and that I needed to contact LG for my warranty. I contacted. LG made a repair appointment and it was canceled. I rescheduled in The appointment and it was canceled scheduled again and that appointment was canceled for no reason at all. So then I called and made a complete. Then after several complaints. They told me they would return the item, then I was told I couldn’t return it because I had not had The machine repair. I explained I hadn’t had the machine repaired because they kept canceling me appointment. So two months and I still don’t have my washer replaced because now that I actually had a repair person who came and said that I was given a lemon. Now they want to send another repair person. Just to avoid returning the washer. I just want a new washer. That’s all nothing else. This has caused me so much frustration, time and money. I have. A family of 6 so washing is a lot. So please do yourself a favor and DO NOT BUY ANYTHING FROM LG ELECTRONICS EVER. They have a reputation for doing this a lot.


r/Appliances • • Feb 13 '26

Bosch Blows

5 Upvotes

Had my Bosch Dishwasher 8 years and the other day Motherboard went. Called Bosch new part $411. Pretty disgusted really they offered no discount , no concern, no compassion. I've been very lucky with my appliances and expect them to last longer. Decision buy new or repair with apart that is almost half the cost of new. What say you? What brand has provided longevity? My previous dishwasher I was able to solder a new relay on the board to save for only $12. Might be worth trying again if I can identify component.


r/Appliances • • 24d ago

Help me convince my husband we need a Speed Queen

0 Upvotes

It’s definitely time for a new washer. Ours is leaking from the bottom, husband is tired of fixing it. I am advocating for a SpeedQueen, but he is balking at the price. We both bring income into the house, we both make financial decisions together. I do the majority of the laundry.

I say we buy it and we spend that $1500 once and have a quality washer for the rest of our lives. He says it’s hard to do that when walking past $800 washers that work just fine. My counter argument is that an $800 washer might last 10 years and then that same washer may be $1500 to replace.

Please come get in my marriage and give your opinions!


r/Appliances • • Apr 21 '26

Replacement for this set up??

Post image
1 Upvotes

I am about to move into a new home and this is the current set up for the stove top but I am having a hard time finding this set up with the warming drawer under. Any advice?


r/Appliances • • Jan 28 '26

General Advice DO NOT use the Seventh Generation Dishwasher Detergent Powder

Post image
12 Upvotes

For context: I’m in the Boston area, using a shitty Whirlpool dishwasher (Sidebar: also do not recommend a Whirlpool dishwasher, it’s so loud I only run it when I’m leaving the house, and it’s not even 5 years old, but I’m a renter so, alas here I am, using my beloved shitty Whirlpool dishwasher).

For the last 4-5 years I’ve only used the Cascade Dishwasher powder (in combination with a rinse aid of various brands, the one I have right now is Finish), and it has always performed admirably for me. A few years ago, I too, watched the famous Technology Connections dishwasher video, and I began doing a lot of the tips and tricks in that video with my Cascade powder (e.g. regularly buying and using dishwasher cleaner, running the hot water right before I start the cycle, cleaning the filter, etc) and my dishwasher performance improved drastically, I was actually very impressed with the performance of the shitty, loud Whirlpool.

Last week, I had run out of my usual Cascade powder and I was at Whole Foods doing some other grocery shopping and decided to pick up some powder there. All they had in stock was this Seventh Generation free and clear dishwasher powder, I figured I’d just try it, so I bought a box.

OH MAN, has this stuff disappointed in every way. Mind you, I’ve changed NOTHING about my dishwasher habits since buying this powder but, after using about half the box, I have regularly had to rewash 40-50% of all the dishes in the dishwasher after each cycle by hand. It leaves glasses so gross, and bowls appear nearly untouched sometimes. Horrible, horrible performance. I had to throw the half box away and go back to my Cascade powder.

Not sure if anyone else has used this powder to better results, or maybe I’ve done something wrong here, but I will never be buying this crap again.


r/Appliances • • 12d ago

Don’t Waste Your Money on a KitchenAid 42” Built-In Refrigerator

Post image
0 Upvotes

We purchased a KitchenAid 42” built-in refrigerator (Model KBFN502EPA00) expecting premium quality and years of reliable service. Unfortunately, the cooling system failed, and we were told it was not repairable. An appliance of this price and caliber should not become a total loss because of a cooling system failure.

We were left with no practical option but to replace the entire unit. We chose a Sub-Zero with dual compressors and completely separate refrigeration and freezer systems. It was a significant additional investment, but we made it for one reason: peace of mind.

I’m sharing this experience to warn other consumers. A premium price should come with premium quality, engineering, and serviceability. Our experience with KitchenAid fell far short.

My advice: Don’t waste your money On KictchenAid

New subzero installed(picture included) today Nov 4 2026


r/Appliances • • 5d ago

Please stop giving Bosch money

8 Upvotes

-sincerely, a tech
That is all.


r/Appliances • • Jun 07 '26

Appliance Chat Why I Regret Purchasing an LG Washer

Post image
1 Upvotes

I purchased the WM6700HVA model, which is supposed to be a higher-end washer. This is my first LG washer.

There are many reasons why I do not like it. For example:

1- It is missing many of the cycles that are typically available on standard, less expensive washers.
2- There is no soaking cycle, which I used regularly on all of my previous washers.
3- Instead of a soaking cycle, there is a 15-minute pre-wash cycle that drains all of the pre-wash water, along with any stain-treatment products that were added.
4- Most cycles are designed around types of clothing rather than fabric types, which I find completely illogical. Linen is not the same as polyester.
5- There is no option to create a custom cycle. You must select an existing cycle and modify only the settings that are available for adjustment.
6- There is no option to save your preferred settings.
7- There is no way to add a garment once a cycle has started.
8- Even though I follow the detergent dosage instructions, my laundry never has the fresh, clean scent I used to get with previous washers. It doesn’t smell dirty, just no freshly washed scent.
9- There are other issues as well.
10- I have also noticed issues with the mobile app.

I even contacted the manufacturer and received the confirmation that there was no soaking option, only pre-wash. They also confirmed that we could not save preferred settings or create a custom cycle.


r/Appliances • • Jul 04 '26

Appliance Chat Please convince me to use a dishwasher.

5 Upvotes

I have always washed dishes by hands and grew up watching my great grandmother cleaning everything by hand making sure our dishes and utensiles were very clean. I pride myself in cleaning with my hands and use special tools so I can get every crevice. Special brushes including pipe cleaners long enough to clean both sides of the staws.

I have heard that dishwasher can actually clean that deep. Ima be honest I dont have that time right now. I need to automate this process and spend time elsewhere. But I refuse to loose that quality cleaning.

Please convince me dishwashers are actually that good.

Edit : i have been convinced. i will look into start using our dishwasher.

thank you everyone for your replies


r/Appliances • • Jan 03 '24

Troubleshooting What is this white thingy I found inside my washer/dryer?

Thumbnail
gallery
0 Upvotes

Hello, today I used my washing machine/dryer and after it was done drying, among the clothes inside the drum I found this thing. It is made from some kind of soft plastic and there is a transparent layer on top of the reflecting part on the back. I worry it is something from the machine.

Any idea what it is and where it came from?


r/Appliances • • Feb 03 '23

Bought a new home with an old Samsung refrigerator. Time to replace? Recommendations on most reliable brands?

1 Upvotes

r/Appliances • • Jul 24 '25

General Advice Is the colour of the fire from our gas stove normal?

0 Upvotes

Flames are blue but with orange crests I had not seem before. Today It rained though.


r/Appliances • • Sep 18 '26

Is this zip tie supposed to be here?

Thumbnail
gallery
0 Upvotes

Dumb question here but I moved into a townhouse this week and it’s the first time I’ve had a dishwasher newer than 10 years old so I’m unfamiliar with this. The spray arm under the upper rack has this zip tie on it. It seems like it’s keeping the upper arm from spinning and spraying correctly but it’s not a brand new dishwasher and was used by the previous owner. It’s a Midea brand if that matters. I’m assuming it’s not supposed to be there 😅 thanks in advance!!


r/Appliances • • Jul 08 '26

Am I right in thinking this dishwasher was not installed correctly?

Thumbnail
gallery
53 Upvotes

r/Appliances • • Oct 04 '26

What is this for

Post image
0 Upvotes

On fridge door on moms fridge. We dunno what is for so she has it empty. Wanna find out so can use the space as should thanks


r/Appliances • • Jun 03 '26

Costco appliance delivery installation nightmare

3 Upvotes

We purchased a four door LG refrigerator from Costco.

At our first delivery and installation appointment we were being told that we would need a new water inlet valve which has to be located directly behind the fridge and to contact Costco to schedule another appointment for the installation. We got a plumber out and got the new valve put in. The new fridge has been sitting in our garage ever since.

At our second installment appointment today the installation person didn’t even attempt to install the fridge and straight away told us it’s not going to fit. According to him the fridge was too big. We had measured the space before and the fridge measures smaller than the space. The space we measured is 36 1/4 inches and the fridge measures 35 3/4 inches. He said to reach out to Costco to schedule another appointment to take the fridge back and offer us a refund. To me it felt like the installer was BS-ing us because he didn’t want to do it.

Bottom line: We spent $$$ to get the new water inlet valve and now we can’t even connect the water line back to our existing fridge as the connection is completely different from our existing fridge. We are left with a fridge with no water dispenser or ice and a fridge that might give out any day now. Then why even make us spent money if it wasn’t going to work out.

This experience has been truly been disappointing. We won’t be purchasing any appliances from Costco again.


r/Appliances • • Oct 12 '25

Troubleshooting Help! Gas burner is stuck ON!

Post image
0 Upvotes

Old GE stove, new to me, the knob was loose but working OK with careful holding/pushing. Now, it feels like it’s depressing and turning like normal but nothing happens. The flame is just stuck on this level. Any ideas? I’m panicking having this open flame.