r/AndroidTV • u/aalubukharahu • 13h ago
Troubleshooting Title: Help needed! TP.SK518T.PB816 Cloud TV stuck on boot screen – Need USB recovery firmware or factory reset method
Hi everyone,
I have a 32-inch Smart TV running Cloud TV OS (Android 11), with the following configuration:
Hardware and firmware details:
- Motherboard: TP.SK518T.PB816
- RAM: 1GB
- Flash storage: 8GB
- Firmware version: 20241008_201956
- Checksum: 20241008_201956
- OCS: 24150907
- Device version: FC
- Wi-Fi: AIC8800
- Bluetooth: AIC8800D
- Firmware upgrade filename shown in System Info: "allupgrade518_an11_8GB_1GB_jef68.bin"
- Panel ID shown as "-"
The problem:
My TV was working normally with TV Town Launcher. I installed Netflix 9.27.1 and TV Bro using ADB. I also disabled Open Browser and some Cloudwalker/demo applications.
Everything was working fine until I switched the TV off and turned it on again.
Now it gets stuck at the boot screen:
"INTERNET TV – POWERED BY CLOUD TV OS"
The launcher never loads. I have tried unplugging the TV and restarting it, but nothing has helped.
What I have tried:
- Power reset
- Holding the physical power button while reconnecting power
- Trying a blank FAT32 USB drive
- Attempting to enter recovery mode using the single physical power button
None of these worked.
What I need help with:
Is there a way to enter Android Recovery or Bootloader mode on this TP.SK518T.PB816 board using its single physical button?
Is there a USB recovery method to perform a factory reset?
Does anyone have the exact stock firmware matching "allupgrade518_an11_8GB_1GB_jef68.bin"?
What is the correct USB flashing procedure for this exact 1GB RAM / 8GB storage configuration?
Could disabling Cloudwalker system packages have caused the launcher or boot process to fail?
I have a 32GB USB drive and a Windows laptop.
I can provide pictures of the factory System Info and SW Upgrade menus.
Please help me recover this TV without replacing the motherboard. I want to avoid flashing incompatible firmware.
Thank you!