r/AnalogCommunity • • 9h ago

Community NLP Standalone - when is this gon drop?

Post image
109 Upvotes

any newson this? rumors are floating around for months. I'm hyped for it. Was usually using SmartConvert and tried the NLP demo and i was blown! Liked the results much better. But I wanna move away from LR. So standalone is the only option for me.


r/AnalogCommunity • • 10h ago

Community NegPy 0.67–0.69: B&W from colour negs, Fade Restoration, B&W slides, Lento Dock support, smarter Roll Average, command-line launch, fixes...

Post image
50 Upvotes

Three releases since the last post. A lot of slide work this time, and once again a big share of it came from contributors.

  • B&W from colour negatives: print through a Yellow, Orange, Red or Green contrast filter, like you would with panchromatic paper

  • Fade Restoration: brings back the dyes of faded slides from its own card on the Roll tab, with an optional Remove Stain

  • B&W slides: a Slide B&W toggle for reversal film like Scala, Fomapan R or dr5

  • Roll Average stays current: baselines measure in the background, and holding U shows the frame on its roll or scene average

  • Pick Dmin and Dmax by hand for the difficult frames auto metering reads wrong

  • Lento Dock as a camera scanning light: frame and whole-strip advance, eject, a flat field shot after the strip, and the dock’s S button starts the scan

  • Contrast Mask refined, based on the Fuji Frontier Hypertone approach. Halation, Glow and Diffusion spread light more naturally

  • Saturation now works in Oklab, so blues stay blue

  • Export Size view shows the frame and grain at export size, and resized exports sharpen at their final resolution

  • Command-line launch: open files and folders, set export options with flags, or render with no window at all

  • More Rust under the hood, so export and TIFF/DNG previews are faster

  • Kodak Ektacolor Edge print stock, more film edge prints, and German, Norwegian and Vietnamese translations

  • Fixes: Auto Crop keeps the whole picture on high-key frames and slides, scanner DNG and RAW colour, macOS pinch zoom, Windows export when another app locks the file

  • and many more...

Full changelog + downloads:
https://github.com/marcinz606/NegPy/releases
Readme:
https://github.com/marcinz606/NegPy/blob/main/README.md
Issues:
https://github.com/marcinz606/NegPy/issues
Discussions:
https://github.com/marcinz606/NegPy/discussions


r/AnalogCommunity • • 7h ago

Community I met two legends of analog photography at Paris Photo!

Thumbnail
gallery
30 Upvotes

Hi all, I've been unbelievably excited for months and months, I finally met Anders Petersen and Steve McCurry, both who were extremely lovely and helpful! Steve told me he shot the green shawl photograph on a 50mm (I couldn't find any information anywhere online) and Anders was just brilliant! 📸✨


r/AnalogCommunity • • 6h ago

Discussion LA Camera Expo

25 Upvotes

Just left the LA camera expo that they hold monthly in Burbank. What is that event? It was a cesspool of arguing and bickering.

Stuff priced higher than eBay and any local store.

What am I missing here? I was only in there for 30 minutes and it felt like the gulag. Vendors were rude and people were ass to elbows with no idea about personal space.


r/AnalogCommunity • • 9h ago

Troubleshooting - Photos Why did my film turn out like this? [canon ae-1 program, 50mm] unsure of film

Thumbnail
gallery
29 Upvotes

Any thoughts on why my film came out like this? i've been shooting film for years, but just randomly for fun and not that often. sometimes they come out great but sometimes rolls come out like this. i'm looking for advice on what i could have done different. unfortunately i'm unsure of the film i was using but it was likely kodak gold 200 or agfa 400, since I had a bunch of those rolls. thanks in advance!


r/AnalogCommunity • • 8h ago

Community Old filmrolls

Thumbnail
gallery
23 Upvotes

Hey everyone I found these in a box in my parents attic.

can I do anything with them are they still good?

they are from 1998/1999


r/AnalogCommunity • • 3h ago

Gear Shots Vintage shop find in Amsterdam, how did I do?

Post image
9 Upvotes

Came across this beauty in an antique shop in Amsterdam for €90. Was this a fair price? Asahi Pentax Spotmatic. It also has the Super Takumar 50mm 1.4 lens and original lens cap. It is in fantastic condition and I went through the shutter/aperture/focusing, everything works without issue.


r/AnalogCommunity • • 20h ago

Gear Shots It finally happened to me

Post image
180 Upvotes

Uncle: “Hey, I know you like cameras. I have an old one I don’t use and your cousins don’t want. You interested?”

Turns out he had an FM2n that he bought for a photography class in college. It’s been sitting in his closet, pulled out every 5-10 years or so in a pinch. Functions all seem to work. Can’t wait to put a roll through it and see how it goes!


r/AnalogCommunity • • 4h ago

Scanning Which one is better

Post image
9 Upvotes

Hey everyone!

I used to own a Plustek OpticFilm 7200, but I ended up selling it because it was painfully slow. Scanning a full 35mm roll took me around 2 hours.

Recently, I found a Minolta DiMAGE Scan Elite II (AF-2920) second-hand for a really good price. Then, just yesterday, I came across a Plustek OpticFilm 7300 at a flea market for a price I couldn't pass up.

Now I'm trying to decide which one to keep.

Has anyone used both? How do they compare in terms of actual image quality and scanning speed? Is the Minolta's Digital ICE worth the trade-offs?

Would love to hear your experiences!


r/AnalogCommunity • • 4h ago

Scanning Improvised scanning

Thumbnail
gallery
7 Upvotes

Today I tried scanning some pictures today since I develeoped them myself and I don`t want to spend money.
I dont own a macro lense, so I made one of a mini tripod and a magnifying glas. It worked somehow xD
Last Picture is what I got unedited out of camera. I´m currently editing with davinci resolve so I´ll see how well this works


r/AnalogCommunity • • 5h ago

DIY Witness - Shutter tester development progress

Thumbnail
gallery
9 Upvotes

I'd like to share some progress on shutter tester I've been working on for a couple of weeks now. I've been developing software for 3 decades now and for the past few years I've been auditing companies for investors so I'm really attached to numbers and norms :) Bought a few cheap shutter testers to be royally disappointed in primitive build or lack of basic norm compliance or even understanding of how shutter speed should be calculated. Also none of the testers gave me any computer connectivity options.

Black box is an early Mini prototype version. Quick 3d printed case. 0.6mm slits for 3 sensors. It doesn't have any buttons or display. Connects directly via USB and can be connected to with a simple local HTML page over Chrome browser. Uses local storage to store camera profiles and measurement runs. Run shown below is of my old Canon 7 rangefinder. Green bar is ISO 516 norm, connected dots represent each of 3 sensors so it helps with detecting unequal shutter velocity. For now it's for a horizontal shutters only - I don't have any vertical shutter cameras to really care and adding 2 more sensors is kind of more work.

Here's a slightly more beefy version of it with 240x280px 1,69″ TFT IPS screen though I have not printed the case yet so here are screenshots.

I know it's a pure geekery but I really love my numbers :) Next version is going to have a slightly larger touchscreen and battery so I can take it with me for camera hunting.

Still this is just to test some of the concepts for my future tester that is not going to use multiply sensors but single line high speed camera to record full shutter run. It's going to be front mounted with appropriate adapter and use bluetooth or wifi to send data. Suitable for both horizontal and vertical shutters. Lightsource built in. Still a long way ahead though.

Comments welcome!


r/AnalogCommunity • • 5h ago

Discussion Little post of praise/shout out to Reveni Labs and their Spot Meter Mk3

8 Upvotes

I got mine around three weeks ago, and it’s been fantastic to use. It’s very small and compact, and extremely intuitive. I was concerned about the whole using-both-eyes thing, since it’s not an optical setup like one of the bigger spot meters, but it works great with your eyes: the screen is basically superimposed on the real world, as if you’re wearing an augmented reality setup. Readings are accurate, and it’s great to support a new product.


r/AnalogCommunity • • 5h ago

Gear Shots Stripped anodization of a Nikon lens

Thumbnail
gallery
6 Upvotes

I was inspired by a post made by Japancamerahunter of a silver 55mm 1.2 lens. I had this spare 50mm that I had already taken apart to repair and decided to give a try to make it “silver”. Its okay for an amateur attempt and polished abit too much but that can be fixed and still need to repaint the distance scale. Debating whether to make the front ring silver as well. Anyway materials used in case anyone wants to replicate:

1M NaOH solution (4g per 100ml water) 100grit sand paper 320grit 2000grit Aluminum metal polish ( could do without to reduce reflectiveness)

-Soak black aluminum parts for about 10 minutes with 2 minutes intervals -rinse with water then dry for some gentle sanding -repeat until anodized coating is removed

Note -do not leave the parts in the base solution or else you’ll risk damaging the metal

  • NaOH is a strong base and is hazardous so please wear gloves and goggles. Neutralize with acid before disposal


r/AnalogCommunity • • 3h ago

Discussion LOMO MC-A / Frage

3 Upvotes

Hallo Ihr Lieben, ich bin echt seit einigen Wochen am überlegen, ob ich diese Kamera kaufen soll, ich habe jede Menge Erfahrungsberichte gelesen und Videos angesehen, hat irgendjemand von euch eventuell eine Ahnung ob die Probleme die sie hatte behoben wurden und man sie jetzt bedenkenlos kaufen kann? Ich weiß es gibt auch noch die Pentax 17 aber ich habe gehört, dass sie sich minderwertig anfühlt, größtenteils aus Plastik ist und sehr leicht in der Hand ist, mir ist es bei dem Preis schon wichtig, dass es sich auch nach Qualität anfühlt… Würde mich freuen, wenn jemand helfen kann


r/AnalogCommunity • • 12h ago

Gear Shots My adventure Minolta

Thumbnail
gallery
9 Upvotes

I have a lovely Minolta XD-7, which I repaired and put new leather on, however when I went hiking with my girlfriend in our local river upstream, I was too scared to bring it along.

That's why I got this XG A since the film catch is broken off and came with this beaten up lens it was dirt cheap.

I tried my hand at some customization. I molded a small wooden grip on it with plywood and closed the gap with epoxy.


r/AnalogCommunity • • 41m ago

Darkroom ansco film and company materials history

0 Upvotes

was wondering if anyone had access to ansco intracompany materials, information about proprietary processes and chemicals, etc

maybe someone’s uncle or grandfather saved a bunch of work stuff

long shot for sure


r/AnalogCommunity • • 20h ago

Gear Shots Bought this Olympus Pen FT for 35$

Post image
38 Upvotes

Body only, the timer button is gone but it can still be pressed. The prism for the viewfinder has a stain unfortunately and the light seals need to be replaced. Rest of the body is in pretty good condition.

This is my second film camera, hopefully I didn't overpay too much. How much are the lenses for this nowadays. Is there any adapter I can buy to use other lenses?


r/AnalogCommunity • • 1d ago Bravo

Discussion Can anyone identify the camera Vivian Maier is using in this photo?

Thumbnail
gallery
314 Upvotes

Thanks!!


r/AnalogCommunity • • 4h ago

Troubleshooting - Photos First roll through recently purchased GW690 II - banding on top edge of photo

Thumbnail
gallery
2 Upvotes

Hi, Recently bought a GW690 II. Condition seems pretty good overall. I home developed this roll of tri-x 400. I’ve been developing for a few months so still quite new to that side of things. Used 500ml of ddx in a two reel Patterson tank. Noticed this banding on the top edges of my photos. Can’t tell if it’s on all 8 frames but it is present on the negatives so I don’t think it’s a scanning issue (sorry not sure how helpful the negative shots are as auto settings on phone mess it up). Wondering if it’s likely the camera or something with the development process. Levels adjusted to highlight the issue. Be greatful for any insight. Thanks.


r/AnalogCommunity • • 12h ago

Troubleshooting - Gear Film camera focus checker

Post image
8 Upvotes

Not sure if anyone has done this or done via a better method? I've made a quick focus checker for 35mm film compacts and rangefinders, out of a cheap action camera I took apart.

An 80mm extension cable and connector was all it needed, I screwed it to a 3D printed part that sits at the film plane, and calibrated through a few of my trusted cameras at 3.5m/infinity.

Next step is to add focus peaking and get it showing on a bigger screen. Anyone made anything similar or come up with other methods to retire the ground glass?


r/AnalogCommunity • • 1h ago

Troubleshooting - Gear Ricoh Xr-p 35mm camera wont stay engaged

1 Upvotes

After I unloaded a roll of film I noticed that it doesnt stay engaged after cocking it. I can also hear while cocking it a *ting* from a spring. I cant find anything about this camera online, let alone repairing it, and dont want to go to a repair shop cause im broke but it seems i must.


r/AnalogCommunity • • 8h ago

Community First roll of film developed from shaky knees music festival

Thumbnail
gallery
4 Upvotes

shot on a minolta himatic 7s on kodak ultramax


r/AnalogCommunity • • 1h ago

Community Is selling a camera on ebay safe?

0 Upvotes

Contemplating selling my mamiya 7 set (Camera + 3 lenses) I haven't used in a real long time but I'm worried of getting scammed on ebay. I'm not getting much luck selling locally but I've been told that I could get scammed and lose my camera and money.

If it's an issue I might sell to KEH but they obviously ask for alot less. I'm being offered 4k USD from them, but obviously they are going to lowball me.

Anyone have any experience?


r/AnalogCommunity • • 2h ago

Discussion Film developing help with Kodak C-41 Kit

1 Upvotes

I am about to start developing my rolls, and I have almost everything I need; I just need help with a few things/questions.

  1. I have the Kodak C-41 kit and want to do the replenishing method. I have heard that for this kit, only the developer needs to be replenished, and the rest can be reused, like the fix and bleach solution, and then the whole bottle can be replaced with new solutions once it goes bad. So my plan is to make 1000ml of all the solutions, split the develop to 2 bottles of 500ml and replenish that and keep the rest of the chemicals in 1000ml bottles and make new solution once it's time to. Will that work, or do I need to replenish everything?

  2. I have 2 funnels for developing and a 1000 mL beaker. Is that enough to prevent cross-contamination between the bottles? I have heard that some people have a dedicated funnel for each chemical, and my school has a dedicated beaker for each step for B&W film developing. Is rinsing them between each step enough? Also, I don't plan on using the beaker for developing, just for mixing the chemicals together before putting them in the bottles.

Also, I need some more measuring cups for the smaller amounts to mix into the 1000ml beaker. Does anybody have any recommendations?

3. I hear that it is bad to pour the used chemicals down the drain and that I should find a place to take them to. How do I store them, and where can I take them? I was thinking about keeping old milk gallon jugs and storing them there to take them to a place to dispose of them.

4. I plan on developing my film in my laundry room sink and drying my film over the sink too. What procedure do you guys use before you start developing and for cleanup after you're done? Also, any recommendations for gloves?

5. Also, I am interested in trying pushing and pulling film. How do I adjust my dev times to push and pull?

That's all the questions I have as of now. I appreciate any advice/feedback and am excited to start developing at home! Thank you!