r/AlphaFoxtrot • u/Magnolia_Forge • 1h ago
Videos / Pics DSC ROM
Pretty sweet, but I'm in the middle of fitting a new purple ano Icarus GM with a copper red dirt trigger and different comp I had fitted from DSC.
r/AlphaFoxtrot • u/Magnolia_Forge • 1h ago
Pretty sweet, but I'm in the middle of fitting a new purple ano Icarus GM with a copper red dirt trigger and different comp I had fitted from DSC.
r/AlphaFoxtrot • u/StayFrostyHolsters • 3h ago
r/AlphaFoxtrot • u/Gunsmith_21 • 7h ago
Went and shot a few hundred rounds this morning! The Romulus 4.25 comp was extremely flat! Super excited for the last few things to come in so I can run it in LO. Will probably get a MPA or Atlas grip module but I’m going to make that decision when I’m a few thousand rounds in.
r/AlphaFoxtrot • u/jb-shoots • 23h ago
Added the EGW ignition and the TGV x Red Dirt trigger
r/AlphaFoxtrot • u/Life_Dingo4874 • 1d ago
Have been very impressed with the AF Romulus, I own 3 and each has performed flawlessly. Great guns.
r/AlphaFoxtrot • u/SerPounceTargaryen • 3d ago
Is it normal for that much buildup to accumulate. 4.25 comped Romulus.
r/AlphaFoxtrot • u/w1ld_zero • 3d ago
Very pleased so far, just need a holster
r/AlphaFoxtrot • u/StayFrostyHolsters • 3d ago
I will be completely caught up by tomorrow! Again, I appreciate everyone's patience over the last few weeks.
Now, I will opening the website back up for orders by Monday, but first I want to take a few days to restock material, clean the shop (plastic everywhere) and catch my breath.
Keep your eye peeled!
Stay Frosty
Jake
r/AlphaFoxtrot • u/NNitchoff • 4d ago
Has anyone gotten the DPM S 15 soft spring kit to work with their 3.5" ported (non comped) Romulus.
I installed it and went with the lightest spring but no dice. When shooting it will fire the chambered round, eject the casing, but not fully cock the hammer.
Anyone else attempting to use this kit with success? Anyone tried any custom guide rod setups?
r/AlphaFoxtrot • u/marzondz • 4d ago
Just purchased my first, in 10mm. Love it. Wanting some suggestions for upgrade parts and where to find them. Ive noticed that there isn't much talk about the 10mm. Unfortunate really.
Thanks.
r/AlphaFoxtrot • u/Gunsmith_21 • 7d ago
Just bought a Romulus. With the PN1 plate it says that it fits an SRO. Well mine does not sit flush. Did ya’ll trim the posts to make it fit?
r/AlphaFoxtrot • u/Suspicious-Expert682 • 7d ago
What’s everyone’s go-to for 124gr in their 4.25 + comp Romulus? I shoot competition so prefer something with a lighter powder charge. Been looking at Federal Syntech with the hope of keeping buildup on the comp to a minimum, but I clean my guns after each use anyway so 🤷♂️
r/AlphaFoxtrot • u/Benza009 • 7d ago
For your viewing pleasure, aluminum and polymer grip module, together! Both sport a holosun 407C X3, one in gold, one in green.
r/AlphaFoxtrot • u/Young-wild64 • 7d ago
Hey did anyone go with the mjd grip for there Romulus and have any fitting issues? I’m trying to get the grip on and i had to order the mag release as I didn’t see mjd has its own mag release
But when installing the grip the hammer isn’t staying locked back, im thinking it’s the Romulus oem trigger that’s giving it issues?
Did anyone else install the mjd and have the same issue or know what could be causing this?
r/AlphaFoxtrot • u/Whiplash907 • 7d ago
Anyone know if the kimber thumb safeties work for the Romulus? I wanna get rid of the ambi safety and just have a left side safety.
r/AlphaFoxtrot • u/FreedomEverything • 8d ago
What size screws will I need to mount a Holosun 407C-x3 to my Romulus that has the updated plate with the o-rings? Are they 6-32 or 4-40? The manual doesn't have any info on this.
r/AlphaFoxtrot • u/SpiritualSquare9348 • 8d ago
Ported by Skips Gunz in WV, no complaints here, I sent the slide before I even took possession, so no “before” but the after is so good idc. I was hesitant to buy a “budget” gun, but after seeing a friend’s Romulus, I decided to give one a chance, glad I did, it rose to the top after one range trip, and that was with the stock trigger. It’ll only get better.
r/AlphaFoxtrot • u/Denham_Chkn • 8d ago
Picked up a Romulus today and it’s the smoothest handgun I’ve ever had. Only issue was my Holosun 507 Comp does not fit on the RMR plate the Romulus came with. It seems like the posts are just slightly too big or too wide. Called Andy at AF and he said is a known issue with some plates being out of spec. He said he’d send me out a different plate, but of course the Microsoft outage prevented that for the being.
Has anyone else had this similar issue with the RMR plate? I can’t wait to shoot this gun.
UPDATE: Andy sent me a new plate and it fits the 507 Comp perfectly. I reused the screws from the original plate, because the ones he sent with the new one were either too thin, or too thick. The QC at Alpha Foxtrot could definitely use some work, but Andy has great customer service. Also, I used the smaller screws that came with the 507 to mount it. It sits nice and flush now.
r/AlphaFoxtrot • u/Ok-Ad1616 • 9d ago
Just picked the Romulus 3.5” and the Kimber 2K11 Pro Comp as my first introduction into the 2011 game. Planning to run them both through the paces this weekend.
What are must-do upgrades on the Romulus?
I am looking into grip modules, but undecided which route I want to go with just yet.
Who makes a good leather or hybrid style holster for the Romulus 3.5”? I carry at 3-4 o’clock and want to try something other than kydex on this setup.
r/AlphaFoxtrot • u/WholeCarry305 • 9d ago
Put 150 rounds through it, no malfunctions. Except the slide wasn't locking back on empty mags initially, but that resolved itself. I was shooting pretty fast for me, and my groups were better than I've ever shot before. I'm very happy with it so far!
r/AlphaFoxtrot • u/Chip_Prudent • 9d ago
Just what the title says. Any rumblings about Black Friday deals for the Romulus? Any specific retailers to watch? Itching for a 5" but hoping I can save a few more bucks.
r/AlphaFoxtrot • u/Marcocks2 • 10d ago
Im getting into USPSA and i want the ability to swap the compensator for a sight block (DSC Gun Works makes a removable sight block) so i can stay in Limited Optics
The problem : i cannoy figure out which models have threaded on compensator or press fit compensators. How do you tell? Do they make a 5" compensated model? Thanks in advance for the input