r/AR9 • • May 27 '25

CALL YOUR SENATOR!

10 Upvotes

The most important 2A legislation in our lifetime is going to the senate right now! HR1 is on its way to the senate now it currently contains the HPA (hearing protection act, removes supressors from the NFA) and the SHORT Act (stop harassing owners of rifles today, removes sbrs and sbs from the NFA) could be added if enough people call. Please call your senators and tell them to protect the HPA and add the SHORT Act! Also call these numbers Chairman Mike Crapo 202-224-6142 Senator Ted Cruz 202-224-5922 Senator Steve Dane 202-224-2651

This is our one chance to get our rights back, let's not let it pass us by. Thanks everyone


r/AR9 • • Oct 28 '22

Love dis thing

Thumbnail
gallery
10 Upvotes

r/AR9 • • Apr 20 '26

Pre-Build Review Davidson defence review. (GOOD!)

Thumbnail
gallery
0 Upvotes

Hey everyone.

I came across Davidson defence while looking for cheap parts to complete some lowers that ive had sitting around.

First things first is the immense ammount of red flags i saw before ordering. A ton of people mentioning terrible wait times and poor communication.

I still decided to go through with placing an order becasue whats the worst that happens I file a chargeback?.

***Order placed 4/8***

So my expectations were relatively set by these reviews.

A few days after placing the order I gave their office a call. 4/15

I was waiting for representative for about 10 minutes. Not great.

But the representative that answered the phone was an absolute delight. I wish I got her name.

The delay times everyone is seeing is due to getting upper receivers ASSEMBLED

The nice lady informed me of this. And this is why I havent gotten my order yet.

She then offered to expedite my order and have it shipped out by 4/21.

Sure absolutely thank you.

****order recieved 4/20*****

Today i recieved my package and man.

I am pleased.

I understand I did not purchase top of the line products.

So when it comes to lower end parts kits. I wasnt expecting great things. And did not get great things.

But the upper receivers and anodizong quality are above par from what i was expecting.

Buffer tube quality is above par from what I was expecting as well.

Have not assembled and fired but visually. Good bang for the buck.

Overall very pleased with how much money I soent. And the level of service and product I got.

Nothing negative to say at all. 2 of my uppers were hand assembled 1 was not. (However I wish I just had them do it).

TLDR: Overall the expectation I was going to wait a very long time made this experience 10/10.

The visual quality of the parts are WELL above par.

I have not fired any of these yet.


r/AR9 • • Oct 31 '24

Best file for AR 9 lower?!

Thumbnail
gallery
0 Upvotes

Just printed Hoffman sl 9 and this is what came out. Is there any other AR9 files anyone would recommend. Spent a day and half printing this & I really don’t wanna waste the time again for it to happen again


r/AR9 • • Jul 05 '25

New Rules You don't have to Look Up

0 Upvotes

It appears the BBB (likely referring to the "One Big Beautiful Bill" mentioned in the results) that includes changes to silencer purchases, including the removal of the $200 tax stamp, is scheduled to become effective on January 1, 2026. This is based on language in the bill stating it would apply to "calendar quarters beginning more than 90 days after the date of the enactment of this Act." Important Points:

  • Bill Status: The bill has passed both the House and the Senate and is awaiting presidential signature.

  • Tax Stamp: The $200 tax stamp requirement for silencers, short-barreled rifles (SBRs), and short-barreled shotguns (SBSs) is removed.

  • Effective Date: The changes are set to go into effect on January 1, 2026, assuming the bill is signed into law soon.

  • NFA Process: While the tax stamp is eliminated, the requirement to submit a Form 4 and follow the National Firearms Act (NFA) process for purchasing these items remains in place.

  • Remaining NFA Regulations: Other NFA regulations and restrictions remain in effect.

  • Current Tax Stamp Status: As of July 5, 2025, the $200 tax stamp is still required.

  • Potential Lawsuits: It's important to note that the bill may face legal challenges.

  • Manufacturer Price Increases: There's speculation that manufacturers may increase prices now that the tax stamp is eliminated. 

In summary, if the bill is signed into law as anticipated, the changes related to silencer purchases, including the elimination of the tax stamp, will take effect on January 1, 2026. 


r/AR9 • • Mar 26 '26

Bear Creek bc-9 complete at >$400, yes/no?

Post image
1 Upvotes

My son is too weak to manage my pistol slides, so I'm looking to start him on an ar9. I'm getting him his first in a few months for his tenth, and I've never dealt with pcc's before outside of handgun frame extensions (love the Recover 20/20). The internet has already convinced me to go with a dedicated lower, rather than intending him to upgrade it to a rifle caliber, and I don't want to break the bank on his first gun. I'd been eyeballing the >$700 offerings from PSA, but then came across Bear Creek. reviews in here on them are mixed, with most complaints coming from compatability issues with other lowers, and with their bufferless systems. I'm looking to buy a complete gun from a single provider that runs on a buffered system, which seems to bypass those complaints, but I want to hear from anyone who may have one and run it a bit.

Are BCA's complete builds worth the money, or am I buying my son something that's liable to blow up in his face?


r/AR9 • • Jun 07 '24

Part Compatibility Ar9 completed what brace?

Thumbnail
gallery
6 Upvotes

I do have the ten round restricted mag because my order from endo mags will probably take a week and a half and primary Arms ship everything in two days for $12 Safe to say this puppy runs, and it runs good like a Toyota FORREAL WATCH THEM FINGERS


r/AR9 • • Sep 16 '24

https://youtu.be/hdVi2sy5y34?si=OJ_aY1whRI9Zu6vu

Post image
0 Upvotes

Hit that link in my bio


r/AR9 • • Jul 05 '26

Troubleshooting CMMG Banshee 5.5" w/ brand new CAT MOB blowing gas and specks of junk into my face and arm

Post image
5 Upvotes

Hey y'all, lefty here. Didn't have any issues with my new Banshee until I put the CAT MOB suppressor on, now I feel like I'm getting lightly sandblasted with blowback on every round. Tried Federal HST, CCI Blazer, and Speer, all 147gr. No difference. Is this just my life now?


r/AR9 • • Dec 28 '25

My PSA AR9: The Diddler

Thumbnail
gallery
68 Upvotes

r/AR9 • • Apr 28 '25

PSA x Aero Precision

0 Upvotes

PSA lower (not sure which 1) Aero Precision 5.5” upper Glock mag


r/AR9 • • Jan 09 '23

Sar 109T

Thumbnail
gallery
0 Upvotes

r/AR9 • • Mar 29 '23

Eye Candy Merica!!

Thumbnail
gallery
4 Upvotes

Built this about 4 years ago but always had problems with it just wanting to go full auto. I didn’t really mind it until I found out what it actually was doing.I finally came across https://blowback9.wordpress.com I decided to follow his suggestions on the proper buffer weights and springs. Damn thing runs like top


r/AR9 • • Jul 19 '26

Pre-Build Review Installed a Ballistic Advantage barrel!

Post image
0 Upvotes

Did it myself, which means I clamped just the bare upper in a vise above the ejection port to take barrel nut off, and on picatinny rail to torque it down to 50 foot pounds.
Is it worth having an actual gunsmith check my work before shooting it?


r/AR9 • • Jan 15 '22

Part Compatibility Airsoft red dots?

Post image
0 Upvotes

r/AR9 • • Apr 30 '22

Part Compatibility Will a 3x magifier work with this style of sight?

Post image
0 Upvotes

r/AR9 • • Jan 08 '26

Where can I find a cheap upper that looks like this?

Post image
0 Upvotes

The Doe style ar9s are always so expensive. I want to find a 9mm upper that has that retro m16 vibe but they are all 600+. Help


r/AR9 • • Feb 08 '25

Did I eff up?

Post image
1 Upvotes

Lup lads, did I screw my upper while trying to lap?


r/AR9 • • Feb 07 '25

Oh that’s bad. NSFW

Thumbnail
instagram.com
0 Upvotes

r/AR9 • • Oct 23 '22

I’m a retard.

Post image
13 Upvotes

Finally had time to build the lower.. realized when installing the hammer that I bought the wrong Franklin binary trigger. Apparently I need one for a PCC not an AR LOL wife’s gonna be pissed about this mistake.


r/AR9 • • Oct 13 '26

Partisan disruptor or Rare breed

0 Upvotes

hi guys im deciding on the rarebreed or partisan disruptor drop in frt. they both are designed with a function to help oob shots so that’s helped me land here. all politics aside on the brands I’m just looking for the best addition to my tool. that being said does anyone have experience with either on an AR9 or both who would care to share their thoughts? curious as well if they might have a RPM difference. thank you for your time.


r/AR9 • • Mar 10 '25

Roller/Bearing Delay Everyone wants an ar9 that takes mp5 mags

0 Upvotes

Ya boi just wants an mp5 that takes Glock mags. Prints welcome as well


r/AR9 • • Apr 01 '25

How is the process for getting an SBR stamp these days?

0 Upvotes

Been hearing a lot about Suppressor stamps getting much easier/faster the last couple years, does anyone have experience getting SBR stamps recently? I really want to do a build using an RRA entry stock but I've never done a tax stamp for anything before.


r/AR9 • • May 07 '23

The last day...

0 Upvotes

5/30/203 is the LAST day to apply for the pistol brace rule free registration.

This comes directly from the FAQ


r/AR9 • • Mar 22 '22

Advice on FRT

0 Upvotes

I purchased an FRT-15, but I don’t think I am going to use it. Gunaccesoriesforsale says you can’t sell them there… how can I unload this thing?