r/8bitdo • • Apr 13 '25

Discussion I Do Not Recommend the Ultimate Controllers

2 Upvotes

To start off, I really enjoyed the weight and overall feel of the controller. However, after the experience I have had with it, I just cannot recommend.

THE RUBBER UNDER THE TRIGGERS:

The triggers offer a very smooth feel and work great.... until they do not. After a while, I noticed whenever I pressed down on the "Gas Petal" (right trigger) in Rocket League, it felt sluggish, unresponsive, and not 100% when fully pressed. I deconstructed the controller and saw the rubber ring under the trigger, that is for the purpose of regulating how far down you have pressed, has a tear right in the middle of it. I take a look at the plastic trigger itself and notice that it is a hard-long-plastic-bit that is in charge of making contact on a delicate rubber ring- literally a square peg into a round hole. Please see the photos I have attached to showcase this.

As a consequence of active use, the rubber eventually tears apart. This is a flaw in the engineering and with this alone, I cannot recommend this controller until it is fixed.

FRONT GAMEPAD PANEL CONNECTOR TO MAIN CONTROLLER BODY:

To preface, this was my error to have disconnected in the first place. ! I highly advise any ultimate controller owners to NEVER disconnect the face of the controller from the main body, as it is difficult to reconnect and offers a very high chance of breaking/ruining the game pad. ! You can snap OFF the face but DO NOT DISCONNECT the wiring from the main body.

The face of the controller is connected through a very thin "connector" (I do not know the terminology) (see attached photos). This wire is responsible for connecting the buttons on the gamepad to the main body which houses the processing, Bluetooth, etc. I did this while following the ONLY YouTube video I could find on deconstructing the controller and completely regret it. Upon completion of re-seating the rubber-bit I had mentioned earlier for the triggers, it was time to put back together and reconnect the face panel. It was incredibly difficult, and I eventually ruined the connection points where one of the gold/copper connectors sheared off- my bad. The directional buttons on the gamepad no longer work and the controller is now ruined. Bummer :/.

SHIPPING NEW PARTS EXPERIENCE:

In the definite event of you needing new parts (mainly the rubber seating under the triggers), you will have to order them from 8Bitdo. I am glad they offer them but should have questioned WHY in the first place they have the exact part, I see now. The rubber bits themselves were cheap at ~$3 but the shipping to the US accounted for an extra ~$6. Incredibly expensive for what it is, and if you were to run a depreciation schedule on this thing, I am pretty sure you would have negative equity in it by 2 years. That being in either emotions, money, or both.

When I finally received the part I had ordered, I only received 1 pair. The packs online come as a 2-pack, so 4 pieces in total, and I had only received 2. Fine. I at least I have a single pair to use in my controller. Still frustrating- I hope support gets back with me. Doesn't matter anyways with the broken controller XD.

FINAL THOUGHTS/TLDR:

If you are thinking of purchasing this controller, be very-very weary. There are too many engineering flaws in the controller that make it hard/risky for ordinary consumers to deal with, in the event of a piece going bad. I still support the company- I like what they do and represent. I just cannot recommend this as it is poorly designed for consistent use. If they were to ever update the trigger set up and made the face panel connection easier to reconnect, I would immediately buy a new controller, even if it was more expensive. It was amazing while it lasted for ~6 months, but is now just garbage. Granted some problems are from my own error, no controller with hall effect joy sticks should sacrifice reliability else where as that is the whole point of getting one in this day-in-age where increased demand for reliable controllers is growing considerably.

(Ik, my cuticles are bad)


r/8bitdo • • Sep 07 '25

Question Help a girl realise her Anki Bro dreams! (Zero 2)

Thumbnail
gallery
5 Upvotes

I’m easily influenced (exhibit A: the labubu). Saw a fellow med student using the 8bitdo controller I’d seen online and after quizzing them about it (‘oh yes, it’s reeeaally easy to set up!’) I decided to order one off amazon.

The controller connects to my iPad immediately, but the app wouldn’t sync. Yes, I switched things off/on again, ‘forget device’-ed, redownloaded the app etc.

I have managed to get the controller recognised as a gamepad connected to Anki and the Anki app has gamepad settings in-app and yet…nada. Keep seeing reference to a ‘keyboard setting’ but can’t seem to find an option to set up a new external keyboard or anything like that in my iPad and, again, the app just keeps showing me a graphic of a controller syncing with a phone like it’s taunting me with what I want to happen.

The L & R buttons work on my home screen now but nothing happens in Anki or w/ other buttons. I realise my friend has the square-corner version whilst I got the rounded one and the website seems to list different compatibilities but info seems conflicting in different places - is there some way of sorting things or do I need to buy the square one? I’m already emotionally attached to this new trinket, lol (and my money!)


r/8bitdo • • Nov 12 '25

Something is Broken Don't use 8bitdo when updating Switch 2 controller

Post image
0 Upvotes

I assumed it would only update my joycons and ignore my controller. Thankfully I easily got out of this screen by switching my controller to 2.4g mode and then back to Bluetooth. Seemingly everything is still functional.


r/8bitdo • • Feb 26 '26

Question Is it safe to keep docking the controller?

0 Upvotes

Won't it keep charging endlessly and bloat the battery?


r/8bitdo • • Oct 18 '25

Something is Broken Would Not Recommend Buying

Thumbnail
gallery
0 Upvotes

Recently I brought the 8Bitdo Ultimate 3-Mode controller for xbox from Amazon on September 29th and not even a full month later I am having issues. Whenever I plug the controller in using the USB cable instead of the dangle It simply doesn't connect. This issue started today and I'm extremely disappointed and will definitely not be buying from 8Bitdo in the future


r/8bitdo • • Jun 09 '25

Question 8bitdo Ultimate not connecting to Switch 2

Post image
2 Upvotes

Hello, everyone! I ordered this 8bitdo controller a few weeks back in anticipation for my Switch 2. I got my Switch when it released, but I'm having trouble getting my system to recognize my controller. I followed a couple of tutorials on YouTube regarding updating the firmware for my controller, but the issue is making me feel as if I'm doing something wrong.

The firmware needed to update this particular controller is "UltimateBL111B1.zip", correct? If not, then which firmware am I needing to download for it? If I have installed the correct firmware, why isn't my Switch detecting the controller? I've tried holding L1+Home+LR, I've tried holding down L1 and -, but still nothing, even when I have the dongle plugged into the dock.

I had no issues getting my Switch 1 to detect the controller, it picked up on the Bluetooth right away, but my Switch 2 doesn't seen to want to see it. Another question: Do I need to have the dongle plugged in/the Switch 2 docked, in order to use the controller with my Switch 2? Again, I followed every tutorial I've watched, to a T, but I'm not sure why I'm having issues.

Any help is greatly appreciated!


r/8bitdo • • Apr 02 '24

Something is Broken “Hall effect sensing sticks will never drift”

Post image
0 Upvotes

womp womp. anyone know of any solutions?


r/8bitdo • • Mar 25 '23

Something is Broken Tried to fix Joycon Drift, joysticks now no longer working

1 Upvotes

So I was having major drift or something. Basically, the right Joystick was suddenly stuck in 43% off center. You couldn't move it below a threshold. Tried every factory reset and reflash of firmware. Nothing.

So, I followed this tutorial fairly spot on regarding cleaning the Joysticks.

https://m.youtube.com/watch?v=SiqGk9kDMhE

Now my Joysticks do not pick up any input whatsoever.

What are my options? Try fixing it again? I'm devastated.

Edit 1: oh my, I did it again and I possibly fixed it. But I broke part of the plastic on the piece that needed replacing, is there any replacement I can buy? Just in case.

Edit 1.5: it appears the item in the video is a potentiometer, and they took out the disc wheel from the potentiometer to clean the contacts.

Edit 2: Results are very inconsistent. It works for a bit then it goes back to detecting no input.

Edit 3: So electrical contact cleaner fixed it for about 10 minutes, which leads me to believe that somehow, the potentiometer got messed up. Every time I cleaned it and tested it, it worked for like 5-10 minutes before messing up again. It's either the disc part of the potentiometer or the entire little potentiometer, which would require completely resoldering the thing. I have not the time or skill to fix a soldering problem. Now I just need to find a disc with the right resistance. I wouldn't know how to check the resistance on a potentiometer like that in a controller.

Edit 4: In the meantime, I used the Android App to make the entire stick a dead zone, effectively disabling the Joysticks. I now have a glorified SNES controller until the Pro 3 or I get a new Pro 2.

Edit 5: I don't have much experience with controllers, but it seems cleaning this potentiometer might result in bad repairs. It's very fragile, and it's susceptible to wear and tear. Controllers should make this piece more resilient with higher quality metals and sturdier plastic.


r/8bitdo • • Jan 16 '26

Discussion DPad disappointment Purple 8bitdo ultimate 2

3 Upvotes

Great device but i dont like the dpad

I really like the idea of ​​separate buttons responsible for their own direction, like on a PlayStation gamepad

But with this gamepad, even if you just press down, there's a chance the D-pad will think you pressed down + back/forward

https://postimg.cc/HJ5gMKL9

Look at this image, if you press with one finger in the areas on the sides, and not exactly in the center, then false registrations occur

I hope 8bitdo will make Ultimate 3 with mechanical buttons at least

Do you have the same feelings guys?

Currently i am playing hollow knight silksong and this really hinders me from doing down attacks and using tools, I have to play with the stick


r/8bitdo • • Aug 17 '25

Question Open space under the joysticks of the Lite 2?

Thumbnail
gallery
9 Upvotes

I just got my Lite 2 in the mail today. I noticed an open space on the lower right of both joysticks, circled in yellow. The first image is the left joystick, the second is the right. The little space makes it seem like the joysticks are pushed that much more to the left and uncentered as a result, I tried to show this in my 3rd image but it's still hard to tell. There doesn't seem to be any give when trying to push them back to the right.

Is this how all of the Lite 2s are? It seems to function fine besides this as far as I can tell, but I'd rather exchange it now if it's not normal and might result in issues later down the line.


r/8bitdo • • May 13 '25

Something is Broken Im sorry guys but please don't buy the ultimate 2

0 Upvotes

The rubbers came off again after supergluing them into place, got stuck in the triggers. i opened the controller, (which is violent since the top hook bits are impossible to get to), took the rubber bits out, put the controller nack together and the act of putting it back together somehow broke the analogue trigger.

Needles to say this is a bad purchase, you at a minimum have to open it once to make sure the rubber pads dont get lodged in your controller. And thats if you're okay with the obnoxiously loud noise the the trigfers make otherwise.

To be somewhat constructive if the rubber pads were connected to the plastic with an I-beam kind of design it would completely fix the issue of the trigger pads falling off. I do not know how it got through the testing stage of development with such a glaring issue.


r/8bitdo • • Dec 26 '19

The SN30 Pro Plus is not compatible with Steam games at all, that or it requires a ton of set up

1 Upvotes

Despite everything looking ok in the X-Input tab I can't get the controller to work properly with Steam games, either the dpad doesn't work, it constantly has issuesor the conctroller as a whole is out of whack.

On the other hand it works flawlessly with Switch, RetroArch and DOSBox on PC

EDIT: For people searching for this issue! I fixed it

  1. If your controller is already activated in Switch mode go to big picture mode on Steam and enable Switch Controller support, apparently just changing to the X-Input tab does nothing and I'd rather not mess with the controller's mode

  2. YOU MUST BE IN BIG PICTURE MODE in Steam for the next step! In the Controller config section click your SN30 Pro Plus and set it up there, this is nice and simple, but as of writing this Steam has a bug where unless you're in big picture mode you can't click the buttons to save your config.

That's about it.

I believe you also must have the 8bitdo software running, tho switching it to x-input tab or switch mode tab is irrelevant

EDIT: Upon further inspection issues with games keep popping up, for example I was playing Shadows Awakening just fine but all of a sudden the "A" Button on the controller stopped working properly in the menu and it would act as both the "A" and "B" button while previously working well.

I either have to set the controller itself in x-input mode or not use it for Steam at all.


r/8bitdo • • May 19 '26

Discussion Who is the Ultimate 3 for Xbox actually for?

1 Upvotes

8bitdo Xbox lineup needs to be rethought. I don’t get how they can justify a product line for Xbox controllers recently and curious how others feel about it. While most of the others are also wired only.

Why would they introduce a new product line with the Ultimate 3, and it only be with a special edition color? Personally the color is not for me but I really wish there was an option for a standard color.

The other thing is 90% of this controllers features are what I am looking for compared to the 3E. Seems to me a that it has everything except swappable sticks,dpad, and face buttons. I think prefer the Ultimate 3 for the price point but feel like the color is done that way on purpose. Make me spend $150 on 3E then make the $100 3 in more colors.

It’s going to be a slap in the face to me for announcing the 3E, waiting 5 months for preorders, missing the launch window, announce a different line of controller with most of the same features, then launch an Ultimate 3 in basic colors after the 3E release.


r/8bitdo • • Dec 02 '25

Question How do you take a screenshot in Steam?

Post image
0 Upvotes

How do you take screenshots in Steam using this controller (8bitdo Ultimate 2 Wireless - Wuchang)? I have the Ultimate 2C and the star button can take screenshots, but pressing the star button with this controller doesn't; it only changes the lights.


r/8bitdo • • Jul 11 '25

Question Brand new ultimate 2 bt circularity error rate

Post image
0 Upvotes

Just tested the stick circularity on my brand new ultimate 2 bt controller. Is this error rate acceptable or should i get a refund?


r/8bitdo • • Jan 11 '26

Question Trying to get aux on the pro 3

Thumbnail
gallery
1 Upvotes

I was wondering if I had a aux adapter for USB c would I be able to connect headphones and hear audio from there


r/8bitdo • • Mar 01 '22

Discussion Green Blink of Death 8Bitdo Pro 2's fatal flaw.

0 Upvotes

Due to an issue in the battery leads they tend to become loose and eventually come right out. This takes this elite level controller to lesser than your average 10 dollar controller.

Great for a few months, but thankfully it was cheap. Sadly this cheap 10 dollar controller has a price tag of 50 dollars.

If your controller starts to turn off randomly, which it inevitably will, go back to the Xbox controller.

Lots of green blink of death descriptions from buyers. People haven't used this phrase. But from what I've seen they get the run around real good. Go here, go there, anywhere but giving you your money back.


r/8bitdo • • Jul 21 '26

Question Ultimate 2 Stick drift problem

0 Upvotes

Does anyone else have stick drift issues on their Ultimate 2 controller when setting the deadzone to 0?

If anyone has a fix for this please let me know, and I know setting the deadzone higher would help, its just kind of bitter having slight stick drift on 0 deadzone.


r/8bitdo • • Dec 05 '25

Question I accidentally bough Bluetooth instead of Wireless

0 Upvotes

I accidentally bough a ultimate 2 Bluetooth instead of a wireless, as I didn't see the difference in button layout. I wanted to ask if the buttons on both controllers act the same on PC. I.e will the bottom button act as A on both, or will it actually be 'B', as it is written on the Bluetooth?


r/8bitdo • • Jun 28 '21

Question Why is the SF30 joypad so rare now?

0 Upvotes

EDIT: I'm referring to the SF30 Pro

So, I bought a SF30 pro last year as a gift, but I myself never got one. I wanted to fix that, but apparently now that joypad is rare and the price is very high. I can find them for 100 euros on ebay... What the duck happened? Some kind of new pewdiepie mentioned them on YouTube?

I love the thing, but I don't like the colors on the new models... so I guess I'm not gonna pick the new one up. I really liked it aesthetically, but now I'll go for a pro controller by Nintendo. I waited to buy one because they weren't exactly cheap even before. I'm so disappointed :(


r/8bitdo • • Feb 08 '25

Question Should i return Ultimate 2C for Ultimate Bluetooth

0 Upvotes

So i just got my 8bitdo Ultimate 2C. And i have never used a controller before so it's my first one. And while everything feels nice, i found it particularly hard to aim, and i heard about Gyro just now. And also learned that Ultimate 2C doesn't have gyro support. So I'm thinking of returning 2C for Ultimate Bluetooth, just wanted to get your opinions on this.


r/8bitdo • • Aug 01 '25

Question Does this model work with ipad?

Post image
1 Upvotes

I was trying to find an affordable and cute controller to use with my ipad and I’m not sure if 8Bitdo Ultimate 2C Wireless will work.


r/8bitdo • • Sep 12 '25

Something is Broken Any idea on how to fix this issue?

Post image
1 Upvotes

My keyboard’s button O has this issue that every time press it, it doesn’t “come back”. Apparently, it gets stuck. Please help.


r/8bitdo • • May 24 '21

Discussion Returned my Pro2 today

1 Upvotes

I was disappointed to find out the Pro2 d-pad still has that “scratchy” feeling of the first Pro+ I really wish they would make a “M30 Pro” with analog triggers, bumpers, and sticks. The M30 is the best d-pad 8bitdo makes by a large margin IMHO. But for now, it’s back to the DS4 and DualSense d-pads for me.


r/8bitdo • • Oct 23 '19

8BitDo controllers are better than Nintendo's. Change my mind..

Thumbnail
youtu.be
0 Upvotes