r/86blackout • • Sep 07 '24

8.6 WITHOUT Suppressor??

0 Upvotes

I am looking into building an 8.6. I have built a 300 BO this past year. I found info and articles on ammo types and specs to shoot my 300 without a suppressor before I built it. I having issue finding any information on can, should or if even possible to shoot a 8.6 with one safely. Anyone found or know of such information?


r/86blackout • • May 06 '25

Suppressor with 8.6?

1 Upvotes

The manufacturer couldn’t answer this, as they haven’t tested. but the can is rated for .308, can it likely handle 8.6 supers? It’s .45 cal so no problem there just concerned with gas pressure


r/86blackout • • May 24 '26

8.6 BLK for home defense?

8 Upvotes

Hello everyone. I’m not new to guns but I am new to rifles, and I want to switch from my 12 gauge shotgun to an SBR for home defense. After researching online I was pretty much set on suppressed subsonic 300 BLK until I started hearing about 8.6 BLK. But there is not a ton of info on 8.6. I have 2 questions:

  1. Would you consider 8.6 BLK for home defense? I keep hearing how much more energy it delivers at subsonic speeds than 300 BLK, wondering how that plays out indoors, over-penetration etc.

  2. Is subsonic defensive ammo widely available?

Thanks!


r/86blackout • • Jul 19 '25

What Superlative Arms adjustable gas block setting should I use/start with?

2 Upvotes

I just built an 8 inch semiautomatic rifle chambered in 8.6 blackout. It is a Faxon barrel. I’m using an Armaspec stealth recoils spring with the buffer they recommend for AR10. I have a Q porq chop suppressor. I will be shooting subs only. I would like to get to a setting that is in the bleed off range so that I’m only sending enough gas to the chamber to reliably cycle the subs with as minimal recoil as possible. Anyone with a similar setup know what setting I should start with?


r/86blackout • • Aug 13 '25

Bear Creek 8.6

2 Upvotes

Does anyone own Bear Creek Arsenal’s 8.6 in the 7.5” or 10.5”? They’re really cheap and pique my interest.

I’ve seen comments on issues with quality control; my goal isn’t really to use this in any precision type of capacity. More of a fun gun and entry into the 8.6.

Also interested in CMMG’s 8.6 dissent.


r/86blackout • • Feb 14 '25

Heaviest bullets

0 Upvotes

Heaviest I've seen is 400gr from Halworx and makers. Anyone see heavier?


r/86blackout • • Apr 20 '24

Why buy. 8.6 rifle when I can get 6.5 easier?

2 Upvotes

Honest question above


r/86blackout • • May 15 '26

More Holicene hunters

Post image
9 Upvotes

r/86blackout • • Jan 02 '26

16 inch barrel, 15 inch handguard, had a friend cut the handguard to make it easier to get to the gas block.

Thumbnail
gallery
18 Upvotes

r/86blackout • • Jun 09 '25

Had to bridge the handguard to make it work but for the amount of use it gets I think it’ll work

Post image
11 Upvotes

r/86blackout • • Mar 29 '24

Best way to build a budget 8.6 scout rifle?

3 Upvotes

What’s the best way to make this real? I needs to be under $1,000US… Looking to build/barrel swap a left-hand bolt scout-style rifle w/ 8.6 16” barrel ready for suppressor. Preferably accepts standard 7.62x51 mags. Need it for hunting whitetail, elk, moose, and bear between 100-300yrds in forested hills. Compact, light, and as quiet as possible using realizable components. Optics and .338 suppressor on another budget. Will be primarily using subsonic rounds. Is it better to completely build from scratch or get a donor rifle for barrel swapping? If so, which one (keeping in mind used left-handed bolts are unicorns)? I need it as realistically accurate and consistent to that 300yrds as possible with cold first 2 shots. Only shooting when certain I have taken 4 second shots in 20yrs. Not looking to brag just meaning I am not laying on a long range punching paper all afternoon long heating up the barrel (just not my thing).


r/86blackout • • Dec 11 '24

Is barrel length still relevant?

3 Upvotes

A year or so ago Alabama Arsenal posted a video about barrel length and ammo basically saying that the loading doesn’t matter. So I’m curious if people are buying or loading for barrel length still. I’m switching from a 16” to 12” barrel and with the price of ammo, would at least like to use up the ammunition I have on hand.


r/86blackout • • Dec 09 '24

Canyon believe it did this NSFW

13 Upvotes

Had a hole in its chest the size of my fist and only made it 25 yds but damn. Couldn't believe it even got up.


r/86blackout • • 4d ago

Input

0 Upvotes

I’m looking at bear creek 10.5 or 12.5 side charging.
I know the barrel is cheaper than most probably will replace it with better quality! Any input just want a side charger.


r/86blackout • • Apr 11 '23

Anyone looking for an 8.6 cherry bomb?

0 Upvotes

r/86blackout • • Feb 11 '25

Picked up silencerco Hybrid DTM, what end cap?

0 Upvotes

So I will either get the 9mm end cap or buy a 5.56 end cap and drill it out the proper size for 8.6blk.

Can someone with a good set of calipers make a nice measurement of their specific 8.6 blackout endcap hole? I'd like to see how it compares to 9mm.


r/86blackout • • Dec 05 '24

Sighting in 12” 8.6

4 Upvotes

Hey guys, sighting in my 12” 8.6 I built and wondering if I’m going to run into any problems when I sight in my ATN using 250 gr when I may plan to go up to 285gr or 342gr in the future. Sighting in at 100yards, how necessary will it be to re-address my zero when going from 250 to 285 or 342?


r/86blackout • • Dec 20 '23

QuickDesign file???

0 Upvotes

Has anyone created a QuickLoad case file with QuickDesign for the 8.6 yet?


r/86blackout • • Jan 07 '26

Convert

0 Upvotes

Looking to convert my remington 700 tactical from 300blk to 8.6blk. What else do I need besides the barrel?


r/86blackout • • Apr 19 '26

Newest Build in Action!

Thumbnail
youtu.be
4 Upvotes

r/86blackout • • Oct 20 '25

why cant i just CALL SOMEBODY !

10 Upvotes

why have so many fire arms space companies made it to where you cant just call customer service !

CMMG, Q , SB Tactical just to name a few . they dont even list a phone number of kind , you have to send an email or request of some sort and hope they respond . now if you do happen to find a number , like CMMG for example , the message says we DONT take calls for customer service ! Q is one of the worst ! if you want to talk to someone there you have to use the telegram app and then after you go to that trouble thay dont answer that either . very frustrating


r/86blackout • • Jun 29 '26

What will almost certainly turn out to be a STUPID QUESTION about OPTICS on 8.6BLK platforms

5 Upvotes

OK so I'm looking at doing my first 8.6BLK build. Most likely a bolt-gun. Looking around and watching all the stooptubers and all that crap, there is one question I've been unable to really find a satisfactory answer to;

If I'm reading everything right .... the 8.6BLK (subsonic):

  • Groups for shit at almost any distance, no matter the barrel quality or length

  • Drops like a stone past 150-200yds in ANY barrel length

  • Is the subject of humor videos about people running out of elevation on their magnified optics at distances many people still feel perfectly comfortable running just a red dot ...

SOOOOO ....... why is nearly every 8.6BLK build I see wearing a 1-8X, 1-10X, or even 3-18X or higher MAGNIFIED PRECISION SCOPE on top of it??

*this is Reddit, so at least 75% of any answers I get here are likely to be some variety of "that's stupid, and you're stupid for asking RAAAAAGGGEEE!!!" and that's fine, that's what makes Reddit what it is, but my thanks in advance to anyone who can help me understand this.


r/86blackout • • May 31 '24

Q fix approved today. What optic ?

1 Upvotes

I’m big NF Atacr guy.

Was between the 1-8 or 4-16 or 4-20

What do yall suggest? Will mainly be used for plinking and occasionally fun hunting


r/86blackout • • Mar 19 '24

Need some help

1 Upvotes

I’ve been in the process of putting together an 8.6 blackout bolt action and have been running into road blocks all along the way. Purchased a faxon action with the barrel pre installed so I wouldn’t have to deal with the head spacing. Bought a magpul hunter 700 stock and a timney trigger. Got it all put together and ordered 2 boxes of Fort Scott ammunition 285 grain. Loaded the first round, pulled the trigger….click. Tried firing that round a few more times and nothing. Put a second round in pulled the trigger and bang. Loaded a third round and click. All three primers look to have the same depth strike on them. At this point I’m thinking it’s either the trigger not hitting the firing pin hard enough or the head space being off? Anyone have any suggestions or something I may be missing. Never go full Faxon 🤣


r/86blackout • • Feb 27 '25

BCA barrel question

0 Upvotes

Those of you with the bear creek barrel, what size crush washer does it take?