SOVOL SV06 3D printer, Creality slicer
SOVOL PLA filament
Nozzle temp: 200° C
Bed temp: 60°C
Print speed: 40mm/s

I stayed with the printing in the beginning while it started printing a 5 hour print, after about 15 mins everything was good and I went to eat, came back after about 1.5 hours and everything was messed up, the nozzle is buried in this monstrosity and was dragging the print.

I’ve literally never had this problem and just printed yesterday, how does this even happen and why?

Is the entire thing trashed at this point, or can I remove this without damaging the wires and nozzle. It’s literally around all of it, I’m so upset honestly idk what to.

Could you guys please point me in the right direction? I am looking for a high res resin printer to print my figures, I design. Is the Elegoo Mars 5 Ultra a good choice? or is there better?

That would be roughly my budget 400 euros

https://eu.elegoo.com/products/mars-5-ultra-complete-bundle-mercury-xs-resin?variant=50220092981524

I have successfully made an early version of a 3MF Data Compression utility. It is located at my github account here CombaryMakerGitHub. The exe works, though since it is new it likely has a popup from Microsoft. The product is safe to use and all documentation is located there.

It is supposed to output files for any and all printers that use 3MF files and it works as fast on the systems that reads 3MF files. This means you can store more product in less space on your crowded and older hard drives (we all know the prices on this stuff is way too high right now). It also works well on that manufacturers thumb drive that normally only holds so many before you have to pull some off.

I am seeking input from users so I can refine this and make sure there is no hidden problems with specific 3D Printers.

This is a MIT Licensed product, anyone may adapt it, use it, or such with just giving me credit for the invention of it.

Yes you big league software companies and 3D printer makers, you can use this without a cost.

Hey everyone!

I'm planning to buy a second-hand Bambu Lab P1S Combo (with AMS), but unfortunately, the seller doesn't have the original box or internal foam inserts. Since this is an expensive and delicate machine, I'm trying to figure out the safest way to pack and transport it. It roughly has to travel 2900 Kilometers ( 1820 miles)

1. Original packaging and compatibility

• Does anyone know the exact dimensions and design of the original P1S / P1S Combo shipping box and its internal foam inserts?

• Would the P2S / P2S Combo original shipping box and foam inserts be compatible with the P1S? Are the external dimensions and internal supports similar enough, or are they significantly different?

• Has anyone actually tried using P2S packaging to transport a P1S?

2. Alternatives to original packaging

If finding the original packaging isn't possible, what would you recommend?

3. Packing and transportation advice

For those who have shipped or transported a P1S/P1S Combo without its original packaging:

• How should the toolhead, gantry and build plate be secured?

• How should the glass panels, door and enclosure be protected?

• Should the AMS be removed and packed separately?

• What type and thickness of foam/padding would you recommend?

• Would you recommend a wooden crate for long-distance transport?

• Any particular precautions to prevent damage from vibrations, impacts or rough handling?

4. Checking a second-hand P1S before purchase

I'd also appreciate a checklist of things to inspect before accepting a used P1S Combo.

Apart from checking print hours and running a test print, what should I verify regarding:

• Motion system, belts and toolhead

• Hotend and heatbed

• AMS feeding, unloading and all four slots

• Fans, sensors and electronics

• Calibration and any known failure points

If you've bought or received a second-hand Bambu printer that was shipped without its original packaging, I'd especially appreciate hearing about your experience.

Any suggestions, practical tips, packaging recommendations or things I might be overlooking would be really helpful.

Thanks!

All bottom surfaces of my prints come out looking like this IF they aren’t flush on the base plate.

This has a small camber as you can see the middle of it is smooth, but the outsides get warped and melty looking.

Same with anything that has a support on the bottom - they look just like this.

ASA on a QIDI X-plus 2.

Surely an Elagoo Centuri carbon is so much better for the same price. Is it because people don’t have the skill to open up a slicer?

it's a snapmaker u1 with the top cover and a creality space pi x4. it's in my basement, which gets pretty humid, so i put the dryer under the table and feed the filament straight from it. the ventilation's been working well and the prints have been absolutely perfect so far.

i used printed mounts to flip the stock feeders so they take filament from below. the ptfe tubes go straight up through the tabletop into push-fit fittings on the feeders, then loop back into the encapsulated printer from the top.

any recommendations or tips for further improving?

Super quick and clean print.

• 0.16mm layers

• Blue PLA

• ~35 min print

Free Makerworld Model

Hey everyone! I've always been a huge fan of classic sci-fi starfighters, so I wanted to design a 3D model that does justice to the legendary X-Wing.

I focused on capturing its unmistakable silhouette, the quad laser cannons, and the intricate mechanical greebling behind the cockpit, while keeping the ship completely print-in-place—so no glue or tricky assembly is required for the fighter itself. This one was printed in Bambu Lab Metal PLA, which gives it a really nice metallic sheen, and it includes a simple display stand (printed here in White PLA) so it’s ready for your desk or shelf right after removing the supports.

I'd love to get your feedback or see your prints if you decide to give it a shot!

Here is the link to the model on MakerWorld for anyone interested: https://makerworld.com/es/models/3617677-star-wars-x-wing-starfighter-display-model#profileId-4146781

So I'm looking to get my first 3D printer, I know very little about them. The main use will be for printing server and network rack mounts etc for my homelab.

AI seems to be recommending the Bambu PS2, but I seem to see a lot of negativity around this brand.

Any advice? What are other fellow homelabbers using and would recommend?

Cheers!

For Christmas I want to get my husband and 10 year old daughter a 3D Printer. Everything is pointing to Bambu Lab A1 Combo, but I'm not seeing a lot of great reviews. My daughter wants to make little toys and my husband wants one to make holders for his service truck. I know nothing about them so any suggestions or advice would be much appreciated!

Salut les makers ! 🖨️

Je développe QuantiX 3D, une application destinée aux passionnés d'impression 3D, particuliers comme professionnels.

L'objectif est simple : savoir combien coûte réellement une impression et à quel prix la vendre pour être rentable.

L'application permet notamment de :

- Calculer le coût des impressions (filament, résine, électricité, usure, etc.).

- Déterminer un prix de vente rentable.

- Gérer ses imprimantes et ses consommables.

- Créer des devis et des factures.

- Suivre son chiffre d'affaires et ses bénéfices.

Je recherche actuellement 15 bêta-testeurs Android pour m'aider à finaliser l'application et la publier sur Google Play.

🎁 La version Pro sera offerte aux testeurs pendant la phase de test et encore quelque temps après sa sortie.

👉 Présentation et inscription :

Devenez Testeur

Vos avis, suggestions et critiques sont les bienvenus !

Merci pour votre soutien et bonnes impressions à tous !

Can you print life-size things with any printer?

I’m been using this ended 3 v2 with a 3D Touch installed…. The firmware I installed allows to create a mesh for itself and also have done manual leveling and changed the z offset…. In my level prints only the bottom left becomes like this… all the other are good in shape..

Hey guys, I wanted a dryer that can fit 4 rolls, can dry petg or up to 75C, and isn’t as expensive as a space Pi4. Does anyone have any recommendations, or should I save for the space pi4?