r/3dprinter • • Nov 23 '22

My printer exploded

No fucking joke, my printer exploded during a print and I'm not using it until I've cleaned it out for fear of starting a fire. Any advice on clearing out PLA?

0 Upvotes

19 comments sorted by

9

u/Ok_Dog_4059 Nov 24 '22

Why does this photo look like a film camera from 1990 took it?

2

u/Mysterious-Pay3309 Nov 24 '22

It's a Chinese budget phone

1

u/Nerdbond Nov 24 '22

Your definition of exploded👁👁

6

u/effortlevel0 Nov 23 '22

Define "exploded". Like Smoke and flames? Or gooey filament coming out your ears?

0

u/Mysterious-Pay3309 Nov 23 '22

The latter, with the filament going everywhere

2

u/effortlevel0 Nov 23 '22

Ah, I see it now in the second pic. Looks like you've developed a leak in your hotend. It can happen with the slightest problem during a nozzle change, degradation of your PTFE tube, poor air circulation from your cooling fans. Definitely look at the board to be safe, but that looks like a fairly common problem.

0

u/Mysterious-Pay3309 Nov 23 '22

Thanks for the info pal! I had a guy just now telling me that I may need to buy a new hotend. That won't destroy my wallet, right?

2

u/effortlevel0 Nov 23 '22

About $60-70 for an upgraded full metal hot end like the micro-swiss. About $20 for one just like the stock one.

1

u/Mysterious-Pay3309 Nov 23 '22

I might go for the £50 one and apologies, my dumb ass didn't notice that you commented twice lmao

2

u/effortlevel0 Nov 23 '22

To clear it out you'll need to heat it up enough to soften the PLA and get the silicone sock off then just start carefully prying it off without damaging the heater core or the thermistor. Depending on how bad it is, you may need to invest in a new hotend.

2

u/Mysterious-Pay3309 Nov 23 '22

Ah shit, thanks for the advice mate I appreciate it!

1

u/[deleted] Nov 24 '22

Dude, you good;. I've had this happen. If you have to go above 230 for any length of time be sure to invest in a new PFE tube. Worst case, a new hot end. I keep one on hand as a spare.

2

u/PyroNine9 Nov 24 '22

It's not really that bad. Heat it up to 170C or so and pull the sock off. You should be able to pull the plastioc off of the block without much trouble. It is's still stuck, turn the heat up until it releases.

Just be careful of the thermistor and heater wires. If you want to use the scraper, heat it to 240 or so and then turn it off so a potential short doesn't blow the control board.

If you have a heat gun or a hot air soldering gun, you can heat the plastic with the printer safely turned off.

2

u/mobius1ace5 Nov 23 '22

Please delete and repost this. It didn't explode. It is leaking not exploding

2

u/TheRealPitbullOnAcid Nov 24 '22

Don't repost just scroll down on this page, r/fixmyprint or use the search button. This issue comes up at minimum 5 times a day.

1

u/mobius1ace5 Nov 24 '22

Minimally deal with the title gore I meant..

1

u/TheRealPitbullOnAcid Nov 24 '22

I understand you. It's just that this issue gets posted so much that reddit alone probably has 1000 answers for the same thing in a month. I've only posted one question because all the info was already here and waiting. I was just willing to actually spend a few minutes to look first.

1

u/mobius1ace5 Nov 24 '22

I'm assuming you aren't new, neither am I. If I was a parent looking on Reddit for threads about 3d printers because I wanted to get one for my kid and saw that title I'm noping right out of there....

2

u/TheRealPitbullOnAcid Nov 24 '22

Yeah. Exploding is extreme for context lol