r/3dPrintsintheShop • u/YouKnowItIHearThat • 1d ago
Brads and pins organizer
The raised parts on either side of the numbers are gauges so you can figure out where to put the ones you find tossed on the workbench.
r/3dPrintsintheShop • u/YouKnowItIHearThat • 1d ago
The raised parts on either side of the numbers are gauges so you can figure out where to put the ones you find tossed on the workbench.
r/3dPrintsintheShop • u/kld53 • 3d ago
I'm looking for a safer way to hold my existing radius templates on a router table. I'd like to print something that holds these corner radius templates and keeps my fingers farther away from the bit. Has anyone seen something that has already been designed? Thanks.
These are the templates I already have.

I'm looking for something similar to this that will hold those templates.

Thanks.
r/3dPrintsintheShop • u/ChatToBrian • 3d ago
Als ik aan het stofferen ben, wil ik mijn nietjes pistool gemakkelijk kunnen pakken en wegzetten, en omdat altijd de nietjes op zijn als je ze nodig hebt, wil ik die ook bij de hand hebben. Daarom maar even een simpel bakje gemaakt om mijn nietjes pistool in neer te zetten, samen met de gebruikte nietjes.
Daarnaast ook nog maar een klemmetje gemaakt zodat ik ook een pakje nietjes kan meenemen op het nietjes pistool zelf, dan hoef ik op onhandige plekken niet telkens op te staan om nieuwe nietjes te pakken. Werkt zelfs op zijn kop (foto ter illustratie, niet omdat ik een nietje in het plaflond wilde schieten).
r/3dPrintsintheShop • u/mariuszmialpsa • 3d ago
r/3dPrintsintheShop • u/aetherforce1810 • 5d ago
Hello fellow shop dwellers. I modeled my own organizers for the excellent Dowelmax jig a while back after not finding what I wanted online, and figured I should share it in case it could be of use for others.
I own the 3/8" and 1/4" dowel sets, and the 45 degree miter attachment, so it holds all of those pieces.
https://makerworld.com/en/models/3628472-dowelmax-jig-gridfinity-organizers#profileId-4160407
r/3dPrintsintheShop • u/Augustas_xyz • 5d ago
I've just finished this set of 25 Christmas ornaments. There are birds, a snowy cottage, a snowman, bells and a few simpler botanical patterns.
The first four photos show my actual prints in white. Each ornament is one connected piece with a hanging loop, 85 mm tall and 2.5 mm thick. They print flat, and you don't need a multicolour setup.
I made the set, and all 25 STL files are free on MakerWorld: https://makerworld.com/en/models/3623690-25-christmas-ornaments-part-1#profileId-4154317
Which would you put on your tree — the little scenes or the leaf patterns?
The final image is an AI-assisted collection overview. AI also helped draft the wording.
r/3dPrintsintheShop • u/Violinjuggler • 6d ago
r/3dPrintsintheShop • u/dedinededin • 19d ago
r/3dPrintsintheShop • u/thedroidurlookingfor • 20d ago
r/3dPrintsintheShop • u/shadow-772 • 20d ago
After procrastinating for a while, I decided to upload the bin I put together for router bits:
https://makerworld.com/en/models/3530322-gridfinity-router-bit-bin#profileId-4036387
For anyone interested, its gridfinity compatible and uses cullenect labels. It fits both 1/4 and 1/2 inch shanks.
r/3dPrintsintheShop • u/Some_Guy_Art • 20d ago
r/3dPrintsintheShop • u/KellyBurns3D • 22d ago
r/3dPrintsintheShop • u/Individual-Ad-4391 • 23d ago
I like making these little bins to organize my drawers. Also, this set for being so cheap works great for small electronics work. Especially working on laptops.
r/3dPrintsintheShop • u/ForestCityLayers • 29d ago
I built this little tool to turn cut drinks-can strips into corrugated panels for miniature roofs and terrain. The frame and rollers are printed, and the pieces beside it are the actual output. So far I’ve tested it with thin can aluminium, not heavier sheet metal. The cut edges are sharp, so handle carefully and keep fingers clear of the rollers.
r/3dPrintsintheShop • u/Pleasant_Banana_3399 • Oct 22 '26
r/3dPrintsintheShop • u/Sweet-Device-677 • Oct 19 '26
i go quite a bit of prototyping and I don't really have a platform to work on, so i created an interchangeable (ie configurable) build plate for my electronics.
i maximize my flexibility, i created my own fixtures for parts. Buttons, switches, power supplies, motor mounts, its a smorgasbord of electronicy goodness
r/3dPrintsintheShop • u/Sweet-Device-677 • Oct 19 '26
got tored of wire unspooling ... so i made a quick jig
r/3dPrintsintheShop • u/SpiderSpartan117 • Oct 17 '26
Salvaged this \~40yo belt sander on trash day. It was missing a roller wheel and the drive wheel was slightly cracked at the shaft. Modeled these up in Fusion360 and printed in PETG. Did a little test grinding some scrap metal and seems to work fine. We'll see how they hold up. Will likely be used lightly and rarely.
r/3dPrintsintheShop • u/NotAPreppie • Oct 13 '26
We got a new toy in my lab: a X-ray fluorescence spectrometer.
Samples are delivered to HDPE cups with a film cover. The machine analyzes the samples with the cups in a vertical standing position, and my samples tend to solidify at room temp. So, when I'm prepping up a batch of samples, I needed a way to stand them up in the same orientation that they'd be analyzed in.
Tinkercad to the rescue!
The cover is because the HVAC in my building is only *sorta kinda maybe* filtered and dust & dead bugs tend to affect the results.
https://www.printables.com/model/1869312-xos-petra-max-sample-tray
r/3dPrintsintheShop • u/Shoddy-Woodpecker854 • Oct 12 '26
r/3dPrintsintheShop • u/Amish_Rabbi • Sep 30 '26
r/3dPrintsintheShop • u/Lilithvia_IRL • Oct 01 '26