r/3Dprinting • • 0m ago

Troubleshooting Best support filament for ASA on Bambu H3C?

Thumbnail reddit.com
1 Upvotes

r/3Dprinting • • 15m ago

Question CAD programs

0 Upvotes

Just got a printer this week. Been looking at a lot of cad programs to design my own things but there's just so many. What are the good ones?


r/3Dprinting • • 17m ago

Print (model not provided) Back with a new one: Morpheus in two sizes, printed without AMS 🕶️

Thumbnail
gallery
0 Upvotes

Hi everyone! 👋 Simo here again. A while ago I shared my JCVD figure as my very first post, and your feedback really motivated me, so here's the next one.

3D printing started as a hobby and quickly became my passion: most evenings you'll find me next to my two P1S printers, testing, tweaking and printing figures. My kids are my biggest test audience 😄 I've learned so much from this community, so I'd love to keep giving something back.

This is Morpheus, printed in two sizes (28 and 18 cm). My goal with every figure is that anyone can print it, even without an AMS:

- Every color is its own part (6 colors), one plate per color

- Parts connect with pins and a little glue, no painting

- No purge towers, so no wasted filament

- Sunglasses at 0.08 mm layers, guns and buttons at 0.12 mm, the rest at 0.2 mm

Happy to answer any questions about splitting a figure into color parts, pins or print settings. And I'd love your feedback: what would you improve?

Big or small, which one would you keep? 🙂


r/3Dprinting • • 25m ago

Troubleshooting Wet PETG or something else?

1 Upvotes

I thought the filament was wet, but...

  1. this print is right after drying

  2. the pitting seems too uniform


r/3Dprinting • • 41m ago

Troubleshooting Help With Overhangs PETG X2D

Thumbnail
gallery
2 Upvotes

I'm having issues with trying to print overhangs on a new X2D with Bambu PETG Basic filament.

I'm trying to print the small basket from https://makerworld.com/en/models/201311-poop-chute-basket-outlet-for-x2d-p2s-x1c-p1s

With the included 0.16mm High Quality setting without supports and the default Bambu PETG Basic filament settings. It resulted in these little clumps being scattered on around, some just on the print bed and others attached to other sections of the print. The underside of the overhang was very scraggly. I could see some filament getting stuck to the nozzle while printing. For this one I bumped up overhang fan speed to 100%.

I then tried to print an overhang test with 0.16mm layer height and lowered the temp of the nozzle 10 degrees to 240 and it seemed worse. Included a video of that print where the entire print gets caught on the nozzle a few times and moved around while printing. https://imgur.com/a/gULNo2v

The filament has been dried for 12 hours in the AMS (65 degrees).

Is there something wrong with the calibration of the print head, maybe it is too low? The rest of the print, non overhang sections, look like they are printing great.

I can just add overhangs, but I feel like it should be able to do better overhangs than its currently able to do without supports.

Would appreciate any help understanding how to improve, or if this is just what I should expect without supports for PETG.

Printer: Bambu X2D
Material: Bambu PETG Basic
Speed:


r/3Dprinting • • 44m ago

Paid Model Nearly that time again! NSFW

0 Upvotes

r/3Dprinting • • 50m ago

Troubleshooting Print not smooth?? NSFW

Thumbnail
gallery
1 Upvotes

Bambu a1 - .02 nozzle - PLA multi color print

Help! Idk why my prints keep having rough patches.. I dried my filament and also slowed down my speed and acceleration. Settings in last photo... can someone help me figure out why its not printing smooth?


r/3Dprinting • • 1h ago

Discussion R.I.P to the Jinx Bust I was printing 32 hours in. Sacrificed to me adding more filament that had been tangled without me noticing

Thumbnail
gallery
1 Upvotes

Don't mind the lobotomy in her head I made her face too thin by accident


r/3Dprinting • • 1h ago

Project 45 days into the 3d printing hobby

Thumbnail gallery
2 Upvotes

My first self made prints


r/3Dprinting • • 1h ago

Hardware Black fluid around nozzle

Post image
3 Upvotes

I was trying to replace the nozzle on my printer and noticed it was coated in a black fluid? What is this stuff? I’m using a Neptune 4 pro


r/3Dprinting • • 1h ago

Discussion How is Creality getting away with this?

Post image
0 Upvotes

This is so close to a Bambu A1 I’d think they were the same company if I didn’t know better. Does Bambu not think Creality is enough of a threat to even bother litigating?


r/3Dprinting • • 1h ago

Question Christmas Village Display

1 Upvotes

Has anyone come across any good display options such as different levels or platforms?


r/3Dprinting • • 1h ago

Project Looking for a talented painter for multi color AMS print

Post image
0 Upvotes

Hello everyone,

I am looking for someone more talented than me to paint this cat keychain in a few variations if possible.

Backstory: So I sometimes volunteer at my local humane society and I printed them some keychains and other ornaments to give out to visitors who take the time to help out or donate - they liked that very much, and they asked if I could contribute again for the upcoming Christmas mini fair they are organizing. There will be hand crafted and knitted stuff, some home baked goods, arts and so on. I plan on contributing with the keychains, ornaments, magnets and other cat and Christmas themed stuff.

The model: This cat keychain model was an absolute favorite, so I want to print them again. After contacting the model author, explaining to him my plan and paying his fee, I got his blessing to do this.

My request: Could anyone more talented than me paint this model in a few cat fur types?

  • Calico - three colored cats

  • Orange - with striped pattern and/or with white feet, chest, face

  • Standard Issue Cat - A tabby with the striped fur pattern

  • Cow Cat - Mostly white body, black spots and black tail

I got tuxedo cats covered with a different model. Siamese cats would be cool, but I don't know if they would look good, also I don't know if I got the right colored filament for them.

Would be cool if the print would retain the fuzzy skin everywhere except the eye holes, as it does now.

Printing with an A1 mini and AMS lite. I usually print a whole print bed of the same model, so waste poop is not as much a pain for me, so the designs could be as intricate as needed.

I can offer: My whole hearted thanks (and that of the humane society) and the last 10EUR I got left in my paypal account.

If anybody could do this and is interested, please let me know in the comments or DM me. Thank you!

Edit: forgot to ask for a pink nose and pink ear holes!


r/3Dprinting • • 1h ago

Question Best 100% free & unlimited alternatives to OpenCode + Ollama for generating 3D parts in SolidCraft?

1 Upvotes

Hey everyone,

I'm a complete beginner at this and have almost zero experience with traditional CAD (only played around with basic stuff in Tinkercad so far). Right now, I'm running qwen2.5-coder:7b locally via Ollama on a GTX 1070 8GB, paired with OpenCode to create 3D parts in SolidCraft.

Are there any coding/MCP agents better than OpenCode for this kind of workflow that are completely free with no daily usage caps? I've heard great things about Claude Code, but it's paid, and freemium tools like Gemini CLI have daily rate limits that cut me off mid-project.

Given my hardware, beginner level, and the goal of having zero daily limits, what would you recommend? Should I switch agents (like Cline, Aider, etc.), or is my main bottleneck the spatial reasoning / context limits of a local 7B model for 3D generation?

Thanks in advance!


r/3Dprinting • • 1h ago

Free Model Printing this for my fish tank

Post image
167 Upvotes

I use pet g. Filament since it's safe for fish tanks. And also the file is on sketchfab for free and it has 15% NFL. The thing weighs around 300 g 400 g


r/3Dprinting • • 1h ago

Free Model Thank you for all your support on my gridfinity travel case!!

Thumbnail gallery
1 Upvotes

r/3Dprinting • • 1h ago

Question Is this good??

Thumbnail
gallery
0 Upvotes

Glitter filament btw...


r/3Dprinting • • 2h ago

Troubleshooting Anycubic Mono 2: Strange dot on my screen but no damage to light underneath. Any ideas next steps? I had a screen protector over it but cannot see if there is a second one beneath the tape.

Thumbnail
gallery
1 Upvotes

Had this strange dot on it. The lights beneath look fine and when i push it it almost looks liquid as it spreads out. Should I take the tape off or will that ruin the top screen?


r/3Dprinting • • 2h ago

Question Iso print model

Post image
2 Upvotes

I'm looking for something similar to the Ikea Vinterfint wall ornament display holder Christmas tree alternative. Kind of like a Christmas shaped expandable coat rack.


r/3Dprinting • • 2h ago

Troubleshooting Why does the concentric latter has blobs but for rectilinear one is fine?

Thumbnail
gallery
3 Upvotes

Using a new filament and usually for some reason the concentric pattern makes a not so clean print on both surface. Not sure what is causing this blobs on the surface as for rectilinear even though it’s not perfect but it is okay results. I’ll try to do more tests to find what causes this but for now I want to know if others had similar issue from using concentric on many holes like in my print?

Printer: Ender 3 v3 SE
Slicer: Creality print
Filament: PLA
Nozzle temp and bed: 195 & 60


r/3Dprinting • • 2h ago

Free Model Filament Rack & Shelf Brackets - Premade or fully customizable (with matching snap on labels)

Thumbnail
gallery
2 Upvotes

Been working on this for longer then I'd like to admit. Didn't like any of the many options out there, wanted something bigger and more stylish with two rods. Also wanted something a little more heavy duty then most which use a broom handle/stick. So I designed my own filament rack that uses closet rods found in most US big box stores.. One set has 32.5mm holes for "standard" rods and the other set has 34mm holes for "heavy duty" rods. I then made a matching set of brackets for shelves that mimic the filament rack. Once those were done I made some snap on labels that are small but securely snap onto the closet rods with interchangeable labels along with adapters to use other popular filament swatches from other designers.

Then I converted my FreeCAD files over to OpenSCAD to made the rack, shelf brackets, and labels all parametric so you can change pretty much everything: use almost any type of pipe (EMT, broom sticks, etc), modify the look to your liking (curves, size, hex pattern), and change the label text.

Filament Rack & Shelf Brackets: https://makerworld.com/en/models/2435556-wall-mounted-filament-rack-shelf-brackets

Complete Filament Labeling System: https://makerworld.com/en/models/2456977-complete-filament-labeling-system-customizable


r/3Dprinting • • 2h ago

Project update on my additive potter's wheel

371 Upvotes

love to hear ideas for improvement


r/3Dprinting • • 2h ago

Hardware Marketplace find for $100

Thumbnail
gallery
458 Upvotes

I'm actually pretty sad that these machines never really caught on. They just happened to come out around the time that bambu started to be big and that I think killed a lot of the momentum.


r/3Dprinting • • 2h ago

Project A seven-piece enclosure printed in black polycarbonate

Post image
1 Upvotes

This print in PC came out great on my H2D :-)