r/3DesignRequests • • Nov 16 '25

i need help

Post image
0 Upvotes

someone asked me if i can 3d print something cause i got a new printer but he lnly had it as a picture but since im new idk what to do with that. the size should be 14cm in diameter and 11cm like at the bottom and height 5cm. if someone can do that id be very happy


r/3DesignRequests • • Aug 26 '26

Is there anyone who creates free 3D models for others?

0 Upvotes

I’m new here and am trying to find someone willing to create a few free 3D models that I can 3D print.


r/3DesignRequests • • Aug 20 '25

I would like to print 6-12 in replicas of this 5 foot statue. Don’t need the polka dots. Could someone design?

Thumbnail
gallery
0 Upvotes

I don’t have the specific dimensions but this is the Virginia Tech Hokie Bird. Here is a link to the bigger project.

https://www.gobbledeart.org/collections/gallery


r/3DesignRequests • • 26d ago

Starlink power cord through back window.

0 Upvotes

I’m trying to find a way to pass my starlink power cord into the cab without just having it close through the door. I was thinking about having a spacer for my back sliding window that has a cutout for the cable and will allow the window to close to make it a waterproof seal.


r/3DesignRequests • • Mar 07 '16

Need a model of a naked obese person designed and printed

1 Upvotes

I'm looking to have a a small statue designed to serve as a trophy. If you think you're up for the challenge let me know and I'll give you all the details.


r/3DesignRequests • • Aug 17 '18

New Logo desperately needed

2 Upvotes

Organization willing to pay $50.00 for a new design logo. It is BDSM group called CIPEX. Looking for something fresh and ageless.


r/3DesignRequests • • Apr 03 '25

Warsun lamp

Thumbnail
gallery
3 Upvotes

Let’s see if this sub is more sane and has fewer scammers than 3Drequest.

I am trying to design a lamp based on the warsun model from TI. I have an STL but it is hollowed strange. I have a couple of models that I hollowed but maybe they are not good.

Here is what I need help with. The model is very small and when you blow it up, it is not interesting. I need some texture and gubbins stuck to them. It should look textured and layered like a Borg cube but still be printable in FDM. That means no detached bits or fine fine details.

I’ll pay $20 upon completion if this done quickly.

The rest of the project I am struggling with is making it a lamp. I have a base to attach to that is 450mm with 3 8mm holes spaced evenly around and 3mm the edge of the hole. I’d like a printed threaded circle that is 450mm (obviously not including the threads) that has the three holes in it to screw into the light base.

You can use the hollowed warsuns I have or make your own but it should be hollowed with no walls thinner than 5-10mm. The warsun sphere needs to be threaded to the base.

Additionally, it needs light holes poked in it in random places both horizontally and vertically.

Lastly each piece needs to be split and multiple keyed into pieces no bigger than 200x200x200mm for printing.

Do all that before Monday and I have an additional $40 for $60 total. Payment upon successful completion. I retain all rights to the files. Comment then PM if interested with examples of similar work.


r/3DesignRequests • • Jan 26 '26

eGPU Dock 3D Case - Edit an existing STL file

3 Upvotes

Hello everyone!

First post here, so sorry in advance if I miss anything that is needed.

I have a TH3P4GAN V2 dock with a Gainward Pegasus 3050 6 GB one fan GPU, and I'm need now of a proper enclosure for this setup.

I found this case:

https://www.printables.com/model/1378801-itg-egpu-dock-3d-case/files

that suits my needs; however, this case is intended for a bigger GPU than the one I have (it has space for bigger GPUs, with two fans), so I wanted to min max it to the best I can, so I have the less space being taken on the top of my desk.

Is it possible to shorten the case a little bit, so it can be more in line with the size of my GPU?

Thanks in advance, and I'm willing to provide any measures or any other details needed to achieve this.


r/3DesignRequests • • Nov 30 '18

Can anyone help with a board game design

3 Upvotes

I am in the process of making a board game. I have a prototype completed and I would like to make the next step to manufacturing. Currently I have figures printed, but they are not my design. I downloaded them from Thingiverse so they are not my designs. I would like to have my own unique figures but I am not savvy in 3D modeling. Would anyone be willing to design minifigures for me. I would be willing to compensate for your services.

Feel free to ask any questions.

Thank you!


r/3DesignRequests • • Mar 03 '18

[Request] Can anyone print out a Nintendo Switch accessory for me.

2 Upvotes

r/3DesignRequests • • Oct 18 '17

[request]help me find plans for a mount for a vaux dot speaker?

1 Upvotes

My daughter is two and getting into everything. I just bought this ceiling mount for my echo. Now she can't get to it, which is great.

She's still able to get to the one in her bedroom though and she keeps turning it off. I asked the etsy seller if they could print me a mount for the echo dot, but he couldn't find plans. I have no clue what to even look for so I was wondering if someone could help me find the plans? The dot is docked in a Vaux ninety7 speaker. That's what we need to mount.


r/3DesignRequests • • Dec 24 '15

3D printing request: Servo gear coupler to hex

2 Upvotes

Willing to pay a "bounty" for someone's help in building an adapter. For some reason, basically nothing exists in the robotics / servo community for a servo-to-1/4" hex drive bit.

Can anyone here help? If so, please PM me and let me know a price for a 5-unit test run. Reddit gold is also an option! Many thanks in advance! :-)


r/3DesignRequests • • Nov 04 '18

Shriner Statue

2 Upvotes

Does anyone know where I can find a 3D model of the Shriner statue that is popular around the shriner hospitals of the shriner holding the child and crutch?


r/3DesignRequests • • Mar 20 '16

Urgent Help

1 Upvotes

I need help designing a March of Dimes tag to print for a work event. Please help.


r/3DesignRequests • • Sep 24 '16

I need help

1 Upvotes

Someone can help me designing or scaning or something like that a Nintendo 3DS joystick? Example: https://images-na.ssl-images-amazon.com/images/I/31v5OP0tdLL.SX466.jpg


r/3DesignRequests • • Aug 19 '15

Need 3D model, iPhone solar case, basic blueprints included, willing to pay up to 10 dollars!

1 Upvotes

Hey guys, For a school project I need to create an advanced science project, and I have chosen to create an iPhone 5 case that has a solar panel. The case needs to include a section for the battery and the solar panel, and a path to connect the battery with the iPhone lightning connector.

The iPhone case needs to have a protective edge over the screen and needs to also have a protective edge around the volume+vibration button.

The blueprints for the iPhone case can be found below, but they aren't very detailed. However they do contain all essential information. Please don't watermark the design with your name, and I can pay the creator up to $10/€10. 15 if i really enjoy it.

Blueprints: http://postimg.org/image/rcbogb6o5/ http://postimg.org/image/6tgsb8sqt/ http://postimg.org/image/pw05y63r9/

Good luck! ~John


r/3DesignRequests • • May 31 '21

Need help designing something

3 Upvotes

I basically know how the mechanism works but I have no experience modeling. It should function in the same way that as tape measure or pull string toy, but designed to look like a ring.


r/3DesignRequests • • May 02 '17

[Request] some pay details inside

4 Upvotes

Hi, long story short I need something designed I'm not new to designing and modeling but I'm not all that skillful as I was

After trying for 4 days straight I'm at my wits end

And basically wanting a stl and obj file for a spinner (I know I'm sorry, it's for my nephews school club)

I've designed a few but this is beyond my knowledge

Anyways I'd be willing to pay, or work out some sort of agreement, it be awesome if you can give me a quote this way I don't waste anyone's time and I can give a straight answer

But the file will have to be given to me with its rights of ownership, of course you will be mentioned and acknowledged in my labels or receipts (lol)

The profits will be going to our local schools group, they have one 3D printer and I'm looking to help them add a few more or at least another

It will consist of 2 versions one with 3 outside bearings and one with 2


r/3DesignRequests • • Feb 11 '18

[Request] custom size simple pipe fitting

2 Upvotes

A pipe bushing is a device used to fit different diameters of pipes together, and I need some help creating one in a non-typical size.

Can anyone help me design and create the necessary files for a 25mm long tube that has an outer diameter of 36mm and an inner diameter of 32mm?

Basically the outer diameter needs to have an outer diameter of exactly 1.4 inches, while the internal sleeve needs to accommodate a 1.25 inch OD PVC pipe.

I'd be willing to pay somebody if they would be willing to print up four of these for me?


r/3DesignRequests • • May 05 '17

[Request] DIY Joy-Con

1 Upvotes

I cannot afford a Nintendo Switch, and would like to be able to convert two 8Bitdo Zero's into functional Joy-Cons and a functioning rail system on both a phone case and the controllers. I have no price range, as I am unsure of how much it costs to design a 3D Print. My phone is the Archos 50 Cobalt.


r/3DesignRequests • • May 03 '17

Need a small low rectangle/grill made, about 11 cm x 1 cm x 4 mm

1 Upvotes

I have a consumer device with a strip of five buttons along its top. They are in a straight line.

Most of the time you want to hit a button in the middle of the strip. But nothing stops you from hitting the other buttons just as easily, which can be a real mistake. The device should have had the other buttons inset or something, but doesn't.

So we are talking about making a "button guard wall" rectangular construct about 11 cm wide by 1 cm deep, which sits maybe 5 mm high, forming small wall guards around most of the buttons (so you have to consciously stick your finger down into the well to hit those buttons), except the one near the middle of the strip of buttons, which would only have a very low wall (just enough to hold the construct together). The buttons themselves are perhaps 2 mm higher than the top of the device around the front of the buttons, and maybe 4 mm at the back. (The device has two parts that meet where the buttons are.)

Because the strip of buttons is in a straight line along the top of the device, simply nestling around the buttons will probably suffice to keep the guard in place. But if not, the guard can be a little more sophisticated. (Make a "footprint" that rests along the top of the device. I could use some two-sided tape then to keep it in place, worst case.)

If anyone is interested, please PM. I will send details and pictures.


r/3DesignRequests • • Mar 27 '18

Looking for CNC service UK

1 Upvotes

Hi, I'm looking to get a foam block machined into a vacuum form mould for a hobby project im working on, it's for a visor on a mask. Mould is about 250 X 200 X 150mm and I have .dxf files converted from .stl model. If anyone's interested in providing this service let me know and ill send the .dxf files and you can give me a price. Thanks


r/3DesignRequests • • Jan 07 '16

Help designing 5 small tokens

2 Upvotes

Hello All,

Not sure how much action this will get since this sub seems somewhat of a ghost town, but here goes!

I recently painted the gears for a boardgame called Tzolk'in and the centers used to have stickers. The stickers don't match my paint job and they wouldn't stick back on anyways, so I was hoping to get some tokens printed with a similar design to what the stickers had on them. But I'm having trouble getting the design of the stickers un-detailed and high-contrast enough to 3D print. This photo shows the pics of the stickers, I don't need the face, the !s or the ?s, just the ones with the names of the temples.


r/3DesignRequests • • Jan 12 '17

Can someone do me the 3D model of this necklace please?

2 Upvotes

I've been trying to do this myself but im pretty confuse with the 3D design softwares, can someone do the necklace in the image in 3D and then send me its file please?

Image of the necklace: https://i.ytimg.com/vi/nHEFS36yhQ8/maxresdefault.jpg

Thank you for your time!


r/3DesignRequests • • Jun 19 '17

[Request] joycon grip modification

2 Upvotes

Hi I was wondering if anyone would be able to make a modification on a pre-existing joycon grip 3D print.

I was hoping for it to be that the centre is removed leaving a small area for the rails for the joycon controllers. At the top the horizontal part tapers down at the back. Links are below for a sketch of my design and the design that I would like to be amended.

Joycon grip 3D print file

Sketch of what I was hoping for

Thanks for reading!