r/3DPPC • • Dec 16 '25

mATX Case (Initial Idea + Ai Concept)

Thumbnail
gallery
9 Upvotes

I want to move my PC off my desk and into a small cove or shelf underneath it. I looked around for existing cases, but nothing really fits the space without switching to an ITX motherboard, which I don’t want to do. My goal is to spend as little as possible by building a custom 3D-printed case using what I already have on hand: 2020 extrusion, a printer, and plenty of screws.

The idea is to rework the internal layout rather than downsize the platform. I’m thinking of moving the PSU above the water-cooled CPU and bringing the radiator closer to the motherboard. That would let me eliminate two case fans: the rear fan would be replaced by the PSU, and I could drop one of the top fans as well. I’d also relocate my existing SSD to sit above the GPU and below the PSU.

With those changes, I should be able to shrink the overall footprint quite a bit while still keeping good airflow. The GPU would pull air directly from outside the case, the PSU would do the same, and the CPU radiator would help manage both CPU temps and nearby motherboard hotspots. It feels feasible without buying new core components.

Before I design it, does anyone know of some existing platforms/cases I could use to either get started with or just to print?


r/3DPPC • • Nov 29 '25

How much cable bent is ok?

Thumbnail
gallery
3 Upvotes

Hello peeps, for my first itx build I wanted to make a compact ~32cm x 20cm build. Only thing what is bothering me is the long cables and alot near 90* bending to the Powrsupply


r/3DPPC • • Aug 17 '26

Looking for an matx case with atx PSU project

0 Upvotes

Hello as the title said I am looking for a case that I can print that is comparable with an matx board atx PSU and fill size GPU. I was going to go with the hyper case but it's a bit bigger then what I was looking form as I am hoping to get as small as I can with the listed pats. I know it won't be tiny but I am going to be taking it to lan party's so want to keep it on the smaller size.


r/3DPPC • • Dec 03 '25

I have a vision to create the ultimate childhood gaming machine.

1 Upvotes

I have a vision to create the ultimate childhood gaming machine. All in one simple cube. I was wondering if anyone knew of a 3D printing service that could take this file and make it fit a mini ITX board and print it? Or where I can pay someone to make such a thing?


r/3DPPC • • Jun 25 '26

Valve’s Steam Machine gets an RTX 5060 DIY rival made with a 3D printer

Thumbnail
videocardz.com
11 Upvotes

r/3DPPC • • Aug 03 '26

Sub 5L Case

0 Upvotes

Hello!

Anyone ever saw a 3d sff case project that have similiar compact and size of Midori 5L? Wonder why no one ever tried something similiar


r/3DPPC • • Aug 01 '25

Request: I pay somebody to design a DAS Case for 8 HDD, based on a Beamcase for me ?

0 Upvotes

The Beamcase is a great starting point for a Thunderbolt DAS Case, unfornately i am a novice and do not have enough skills to update this Design to my needs,

Can somebody help ?


r/3DPPC • • Jun 15 '26

DIY NAS case with 5 hot swap bays mini ITX mobo SFX power supply rear exhuast 120mm fan

0 Upvotes

Looking for such NAS case and really no one exists expecially only 5 hot swap bays mii ITX board and SFX power supply support and 120mm rear exhaust fan.

Is there any 3D printouts of such a case or similar.


r/3DPPC • • Oct 08 '26

Looking for sff(or matx case)

0 Upvotes

Is there any list of cases with parameters so i can filter by

1)Matx motherboard

2)Graphic card length up to 310

3)psu up to 160

4)temperatures as in full atx case(max 60/70 for cpu/gpu)

The smallest the better


r/3DPPC • • Jun 15 '26

Im new into pc case 3d printing, help me find a micro-atx case that i can print

0 Upvotes

Hi, I want to reuse old pc parts I have lying around and make a pc dedicated to running servers for games, local LLMs, use it as storage for photos and other stuff, etc. I didn't know this sub existed until I started looking into micro-atx cases and found that many people just print it themselves. So I decided that's what I'm going to do, I'll print the case myself.

The idea is simple I want to print a case that fits a 2060 (gigabyte 6gb). The cooler I will be using is the Noctua nh-l9x65, I also have a Wi-Fi network card I'd want to use because the motherboard doesn't have Wi-Fi so the case needs to have enough expansion ports for the gpu and the Wi-Fi card. As for my printer, I have an Ender 3, so not the best, but nothing I can't solve with a bit of tuning and postposing.

I don't know if this kind of post is allowed here. If it doesn't let me know please. I looked for a bit around sites like printables, but every case is either an open case for benchmarks or just don't fit what I'm looking for. I found a couple I liked on this sub, but they are either personal projects or you have to pay (I don't have any issues with paying, but I will get there later).

I'm willing to pay for a model, after all the person who did it probably worked hard on it and deserves compensation for it if I'm going to use their case. But I don't want to spend money on a case I don't know if I'll like or even be able to print.

All I want is for you to help me find a case I can print and use on that pc.


r/3DPPC • • Aug 27 '26

Ground bonding

0 Upvotes

Does anyone provide a bonding path for all of the grounded points of the internal components in a 3D printed case? I was considering using a foil tape on the inside to provide a path between the standoffs, the IO shield, and the PSU; but it seems like all of the builds I see do not worry about it.


r/3DPPC • • Mar 30 '25

Should my family business invest in a 3D printed PC case?

5 Upvotes

I run a small 3D printing business and we also do computer services, so a 3D printed PC case has been something I've wanted to make for a long time. It would be flat packed for international shipping, and we'd keep pricing as low as possible.

What would you be looking for in such a case?


r/3DPPC • • Jun 11 '24

Mini ATX Case

Post image
2 Upvotes

Hello, do you know, where i can find a Mini Case for an atx Power supply and a Mini ATX Mainboard ?


r/3DPPC • • Jan 25 '25

Don't know if this fits the bill but I was wondering if there was any 3d models that can cover the back of my pc? (the silver cable part) Preferably allowing me to connect it to a cable cover

Post image
8 Upvotes

r/3DPPC • • Dec 30 '24

Upgrade from MBP 16 2019 intel- disabled please help

3 Upvotes

Hello,

I bought a MPB 16 inch 2019, 2,3 GHz 8-Core Intel Core i9, Intel UHD Graphics 630 1536 MB, 32 GB 2667 MHz DDR4 in 2020. Doing anything in Premiere, Blender, Unreal etc. is a pain, it's still working but the bad Intel chip is hindering me from sticking to working.

I'm an art student that does need functional machines not only for studies but work that could benefit my career prospects-

I saved up money and want to invest in the most sensible set up but of course dont want to overspend due to misinformation, due to chronic illnesses it's difficult for me to retain all that information and would be very grateful about help.

Should I get a PC desktop station exclusively for these tasks and software, if so which configuration?

and/ or MBP M4 Pro/max? or MB Air M chip?

Which iPad?

I'm based in Germany if that changes anything.

Thank you!


r/3DPPC • • Jul 10 '26

Help, 3d printed case for optiplex 3070 sff

1 Upvotes

I tried looking for a 3d printed case for my optiplex 3070 sff, but I couldn't find anywhere. I want to do a case swap, but I know that dell has mostly custom part, and since I got recently a 3d printed wanted to upgrade the case to fit bigger gpus in it while having a clean look and be cheaper.

Does anyone know or has 3d print files for it?


r/3DPPC • • 18d ago

Fun idea but also completely dumb idea all at the same time

1 Upvotes

So I had this idea for a pc case, likely 3d printed in segments, and the idea is to make something that has not been done before, and for a good reason it would be massive, three 200 mm on a pc case

There are many reasons this is dumb but many reasons this can be fun, would this be even be possible? I do understand this theatrical case would be massive and tall but still its so dumb and stupid it becomes just fascinating to me.


r/3DPPC • • Aug 27 '23

Bad idea or worst idea? 3x3090 open-ish case

1 Upvotes

I'm building an AI/ML rig with either three or four 3090FE's, and am looknig for a novel way to get all the video cards attached to the motherboard and presented in a cool way. Inspired by some of the vertical GPU Mini ITX cases I've seen here, I've been thinking about designing a fairly large "open air" case (not truly open, because it will have a forced air channel for the GPU's). See screenshot.

The general idea here is that the cards will have heat pulled through the back, where the PCI slots are, and expelled using a blower fan. This should help a lot with cooling. I also want to be able to see the fans spin up and down, i think that'd be cool.

Physically, this thing would be maybe closer to an art installation than a PC case. It would be large, the motherboard/fan/cooler would be pointing away from the viewer toward the wall, and the 3 3090's would be facing straight out, monolithic, proud.

I think I could route the cables using riser cables, and the PSU could go inside/under the main case...

Is there anything about this design that I'm overlooking? Any reason it would absolutely not work?

No SATA drive slots needed, just the two onboard.

The video card outputs are also not needed, as the mobo has onboard video; The entire channel "under" the videocards would be for an airway only.

In case it isn't obvious, the squiggle is airflow. The tan boxes are GPU's, the red is the case.


r/3DPPC • • Oct 26 '25

(Request) An SFF pc case for horizontally mounting a 170ish 4070 ti 16gb that I'll make a custom shroud for

1 Upvotes

As the title says. I'm wondering if any of you have a 3d printed design that would fit a custom-shroud super sff 4070 ti 16gb? I found something that's not 3d printed, the Malkans SF8G but it's out of stock EVERYWHERE. An 8 liter case similar to it would be nice and appreciated. Gonna use SFX or SFX-L PSU's and air cooling ofc.


r/3DPPC • • Dec 17 '25

Pricing

0 Upvotes

LMK if this is ok to do, but im not someone who has a 3d printer, but i would love a network server rack and pc case 3d printed, how much does something like this go for, how do people price items, etc?


r/3DPPC • • Apr 24 '25

Replaced my cooler master xb evo

Thumbnail
gallery
9 Upvotes

Made this case to replace my xb evo as it doesn't have enough room for new gpu's. It has a 5.25 to 6x 2.5ssd hot swap bay in the back. Haven't cut the plexiglass yet on the front. Also this is my first 3D print besides a benchy, would appreciate any pointers.


r/3DPPC • • Feb 01 '26

So... my network rack didn't have the fancy Unifi cables with the "long boot". Had to fix that asap.

Post image
10 Upvotes

https://makerworld.com/en/models/2330780-rj45-ethernet-long-boot-cover-sleeve-ala-unifi#profileId-2546687

Free as in free beer. Go get it. TPU. It has a version that's open on one side with a slit, so you just slide your existing cable right in; Don't even have to unplug it. Do it. Go. XD


r/3DPPC • • Jun 15 '26

How to color match my GPU?

Post image
4 Upvotes

I am currently designing a custom case with this gpu and I want to match the color of it to my Sapphire PURE RX 7900 GRE, which I find especially beautiful after removing that red light. I found the pic on Google, not mine.

Also any tips to get a smooth finish is appreciated


r/3DPPC • • Jul 14 '24

my server is overheating, suggestions? I made this so that I would be able to filter all the dust from my server and never have to deal with dust, but air flow is insufficient...

Thumbnail
gallery
8 Upvotes