r/350z
•
u/dbsqls
•
Feb 02 '26
š¢ Subreddit announcement How to view the FSM/repair manual on mobile
The Factory Service Manual contains literally everything you need to know about technical problems, and indicates solutions for them. It's what the techs at Nissan use to diagnose and fix the cars.
r/350z • u/AlexShifu94 • 3h ago
HR 6MT Anyone in UK wants to trade their auto Z with my manual HR 09?
Hi,
I'm sorry if this would offends you but rather than swapping the engine I decided to trade it and hand it over to the person who would enjoy it.
I have a 2009 HR tuned to 325bhp
r/350z • u/SHIFTYKAMII • 8h ago
ver. NISMO āļøRick and Morty 350 Z āļø
Hi, Iāve been part of the Nissan 350 Z Reddit for like two years now I used to have a Nissan 350 Z convertible black was beautiful anyways I would thought Iād get on here and finally post about something 350 Z related. I was watching the newest season of Rick and Morty and for some reason the animators instead of just drawing a regular cars they decided to draw 350 Z and I literally think itās the coolest thing ever like it was not needed but itās just so cool that they did that and I thought I would share it to all the 350 Z enthusiasts
r/350z • u/Timmyparttwo • 8h ago
HR 6MT Pride and joy with battery issues!
Has anyone else experienced some kind of hidden parasitic drain on the battery? I havenāt been able to drive this beauty as much over the past few months, and the battery will completely die after 2 weeks of sitting. Everything is stock so I wouldnāt think itād be an aftermarket product issue?!
r/350z • u/Gooberwatch • 4h ago
HR 6MT Transmission squeak during hard acceleration
Hello everyone, As the title says, during a pull I get a transmission squeak.
Not really sure what it could be if anyone wants to point me in the right direction. No performance issues that I know of.
Blinking CEL is from a P0300 which Iām still trying to figure out.
Current Transmission modifications are
ZI Lightweight Flywheel
Z1 Road Race Clutch Sprung Hub Full Face
Z1 Clutch Concentric Slave Cylinder (CSC)
Elimination Kit
r/350z • u/Livid-Flight-2805 • 1d ago
Revup 6MT How rare is Interlogos Fire?
Hey guys my brother just bought a base 6 speed interlogos fire with 50k miles for 3k that was abandoned by the original owners in 2013- any clue how rare the color is or anything we should know?
r/350z • u/Lune_350z • 4h ago
DE 6MT 350z Temp. Gauge high
I just replaced all the radiator hoses on my 350Z because they were leaking. Since then, whenever I drive, the temperature gauge on the dash climbs pretty quickly. After just 5 to 10 minutes of normal driving, as soon as I give it a bit of throttle, the needle shoots straight into the red. The coolant level is fine, so the only thing I can think of is the thermostat. The heater also never blows warm anymore, only cold, and the cooling fans are running constantly.
Has anyone run into this before or had the same problem? Any ideas would be appreciated. Cause i gotta drive like 400km soon and gotta fix it quick gotta store my car over winterā¦
r/350z • u/Desperate_Zone_9869 • 1h ago
HR 6MT 2008 350Z HR (UK)
Recently got myself a 2008 350Z HR and looking to start picking up a few bits to personalise it.
Just wondering if anyone has any parts for sale or knows of anyone breaking a 350Z?
Mainly interested in cosmetic / aftermarket bits, such as:
Rear spoilers
Side skirt extensions
Front splitter (got KBD one) ā
Rear diffusers
Aftermarket exhaust systems (got milltek cat back, but too quiet) ā
Alloys / wheels (sitting on GT4s) but wouldnāt mind another set, perhaps black.
Other aftermarket styling parts
Open to other interesting bits too!
Ideally UK-based, but happy to consider postage depending on the part.
Feel free to drop me a message or comment below if you have anything available.
r/350z • u/WizardFlameYT • 15h ago
DE 6MT Different size tyres and traction control
I have 19 inch wheels from a 370z (both 245s) and want to look at 19 in front and 20s in back because of the bigger wheel well fender or whatever its called. Front fits perfect on 19s, so was thinking if I make rear bigger by an inch it would fit nicer.
Anyways real question is, how would traction control and my speedo work if I did this? How would I go about adjusting this in the computer or would it just not be possible?
r/350z • u/Moetsukiru • 3h ago
DE 6MT Questions about DE hood clearance with S14 and possibly exposing plenum

Hello! I've posted in here before about my 1996 240SX that's getting VQ/CD swapped. well it's very close to finished and the shop sent me some pictures and videos from the first startup (!) which I'm very excited about, but one of the pictures had me a little worried. I know the VQ is tall and hood clearance is an issue in the S14 engine bay, so I was fully expecting problems, but it seems worse than I anticipated. I'd really like to come up with a creative solution, and my hood is non-original, aftermarket, "carbon fiber" from about 23 years ago (I have no idea if it's actual carbon fiber or just made to look like it is. basically, though, I don't care about it very much. I want to keep it, but I'm happy to modify it. which brings me to the big question here...
assuming that there ARE clearance issues, could a possible solution be to do a cutout in the hood to accommodate the plenum? think: Hemi Cuda.

I've always loved the way the engine is poking out of the hood on these old cars, and I feel like this could be an opportunity to do the same for my car.
this should help the hood clear, right?
what sort of issues would this cause? would rain be a problem? I know the hood might need reinforcement, which is fine, but I'm just worried about the mechanicals
would it actually help with cooling at all? could this be a perfect mixture of form, function, and fixing a problem?
the VQ is pretty hated by the S-chassis community as a swap (why I'm not asking on that sub), and many people cite the ugliness of the engine, but I think it looks pretty cool and sorta want to show it off. thoughts? concerns? recommendations? I don't wrench on my car, the shop is doing everything for me, so it would be done by professionals, not a home job. it's probably something I'd do later down the road, not right away, as right now I just want to get it on the road and start enjoying it, but might be something I look into next year or the year after, depending on the answers to the questions above. thanks!
NISMO S-tune Looking to trade Motordyne Shockwave exhaust for Nismo
Iāve got a clean Motordyne shockwave exhaust that the PO of my car installed. I canāt complain about the quality at all, just a little too loud for my old man ears. Fortunately itās only loud when you get on it but I just prefer a Nismo unit. These exhausts are pricey but Iām willing to straight trade for a clean Nismo kit, preferably in the Bay Area.
r/350z • u/Big_brrrrd • 18h ago
DE 5AT What could be making the noise
Only makes the sound when turning the wheel at low speeds
A note about Japanese parts/services and lead times
November has been great for ADOPT and most of you are from this sub. I deeply appreciate the support.
I'm seeing just about everything in Japan arrive after wait times 2-3x as long as their typical quoted completion time. Sometimes it's shipping as the materials are overseas in Taiwan, simple delays in logistics, or what have you -- but it's happening across all Japanese vendors I work with. Every step of the process has been slower.
For example, MCR hoods were quoted at 2-3 months, and they only reached my exporter this month -- something like 8 total months in production. Even services like overbore throttles are taking 4-6 weeks instead of the 2-3 weeks they would normally.
I think this has quite a lot to do with a combination of a struggling Japanese economy, and the expense of various petroleum products whose supply is choked due to both wars targeting petroleum refineries. The cost is simply too high for Japanese companies and this means they wait for batch orders to keep costs stable, rather than paying the hiked-up prices. Almost all materials are taking a month to arrive if out of stock, so they can't start work until they arrive.
In other areas, the lack of demand means small companies have stopped holding stock and instead are opting to do production to-order, which is how all this delay gets baked in.
Japanese business in general does not tolerate multiple inquiries, rushing, or checking in on them, so I can't provide shipment updates on a weekly basis as would be typical in the US.
So, please be aware that anything made to order will likely take some time to be processed. I imagine it's going to be the same at other companies as well.
looking to buy Iād like to hear about some of your own experiences
Iāve been looking to get a Tomei single-exit exhaust for some extra āumphā to my z but Iām mainly worried about getting ticketed for excessive noise. Iād like to think if I shift under or around 3k rpms that the noise would be acceptable but Iād like to hear from those who actually have a Tomei in whether or not I can control whether or not the exhaust is ticketable.
r/350z
•
u/bere16random
•
1d ago
DE 6MT Windshield repair guys broke my window trim after second attempt to replace it
ver. NISMO Nismo back on the road
I've had this car for 8yrs, and the tags have been expired for 7 of them lmao. Felt so good putting this back together, and driving it again. Just have it operational, but have some more stuff to do to it.
#0288
r/350z • u/hadtodoit420 • 1d ago
HR 6MT Currently replacing my valve covers and valve cover gaskets.
Noticed some pretty heavy wear on two of my lifter buckets. How concerned should I be about this?, what possibly could have caused this? All my other buckets appear to be fine. Also noticed so wear on some but not all of my cam lobes. Is this normal wear for the cam lobes? or something I should be concerned about?
r/350z
•
u/bloodywon
•
1d ago
DE 6MT VTX Kbd Fitment
Im painting my vtx style rear bumper and ing style skirts on friday, I dealt with the shit quarter panel fitment but I want to fix it since im spending the money to get it properly painted, I thought of maybe drilling holes into the quarter panel and kbd bumper and using wing nuts with screws to hold into place, Just wondering if theres any other ways to have it flush or if my idea will even work, Thought i would ask before drilling into my carš . I know you cant see in photos well but basically the kbd is pushed outward on the quarter panel and the rear placement for the oem screw fitting is a shit angle so it makes it worse. bumper and skirts go in for paint on friday. should get them back sunday-monday
r/350z • u/Specialist_Net8232 • 2d ago
DE 6MT My 2005 DE Touring 6MT
Iāve owned this car for 5 years and I donāt think Iāll ever be able to sell it. Itās too much fun. 110k miles on the odometer, bought it with 74k.
DE 6MT What would you price this VQ35DE?
Hi guys just looking for advice on what this might be worth?
Horsham Developments motor
High compression 11:1
forged rods
forded CP pistons
ARP bolts all round
HKS step 1 cams
HKS steel head gaskets
Runs well car was ok the dyno for 330 (so about 315hp to the wheels)
r/350z • u/Lopsided_Leave_5152 • 1d ago
DE 6MT Need to know if Itās a good deal. Or even a fair price
Iām buying my first 350 Z back in January. I sold it for 2500 not running. He ended up needing to replace the engine and transmission. I would be buying the car back automatic for 5000. Heās willing to sell me a donor car for 3000. Said car has everything I need to manual swap with a cd009.
This would bring the total to 8k the donar car has 30k miles and is a revup